TAF12S备件表

网站首页 ꄲ 备件表 ꄲ 温度和系统组件 ꄲ TAF12S备件表

订货号

规格

71389514

延长导线 TC IEC 2x type S/R

L=180mm, 3 pieces

71389517

延长导线 2x type B

L=180mm, 3 pieces

Terminal head only on request

71182602

密封

5x O-ring 3.69x1.78
5x 0-ring 74.7x2.75

71044061

设备包

2x screws, 2x springs, 2x spring rings,
1x sealing CDI-connector

TMT181-

模块温度变送器 TMT181

Temperature transmitter,PC-programmable.
Application: RTD, TC, Ohm, mV.
2-wire 4-20mA, galvanic isolation.
Fault reaction: NAMUR NE 43.
Mounting: head form B, DIN EN50446.
UL listed.

Approval:
A	Non-hazardous area
Configuration Connection:
1	Thermocouple TC
Configuration Sensor Type:
B	Type B, +40...+1820oC, min. span500K
R	Type R, -50...1768oC, min. span500K
S	Type S, -50...1768oC, min. span500K
Y	Special version, TSP-no. to be spec.
Configuration:
B	Measuring range, see additional spec.
Additional Option:
A	Standard - DIN mounting set

TMT84-

模块温度变送器 TMT84

Dual sensor input.
Advanced diagnostics: sensor monitoring.
Galvanic isolation 2kV.
Application: RTC, TC, Ohm, mV.
Current consumption: 11 mA.
Mounting: head form B, DIN43729.
Factory setup:
CH1: Pt100, 3-wire, oC
CH2: inactive
Differing configuration optional
selectable.

Approval:
A1	Non-hazardous area
Output Signal:
A	PROFIBUS PA
Electrical Connection:
1	Spring terminals, housing form B, DIN EN 50446
2	Screw terminals, housing form B, DIN EN 50446
Field Housing:
A	W/o, mounting set DIN standard
>Configuration Input:
D1	Ch1: TC, Ch2: inactive
D2	Ch1: TC, Ch2: TC

TMT85-

模块温度变送器 TMT85

Temperature transmitter with dual
sensor input and advanced diagnostics
for sensor monitoring.
FOUNDATION Fieldbus protocol (ITK 5.0).
Galvanic isolation 2 kV
(sensor input to the output).
Application: RTC, TC, Ohm, mV.
Current consumption: 11 mA.
Mounting: head form B, DIN43729.
UL listed, CSA General Purpose.

Approval:
A1	Non-hazardous area
Output Signal:
A	FOUNDATION Fieldbus H1
Electrical Connection:
1	Spring terminals, housing form B, DIN EN 50446
2	Screw terminals, housing form B, DIN EN 50446
Field Housing:
A	W/o, mounting set DIN standard
>Configuration Input:
D1	Ch1: TC, Ch2: inactive
D2	Ch1: TC, Ch2: TC

FXA195-

通讯接口 FXA195

Modem to connect HART field devices
to a computer via USB. Commissioning of
field devices with software tool.
:: To connect to a intrinsically safe
signal circuit.
:: SIL2, IEC61508.

Approval:
G	ATEX II (1)GD [EEx ia] IIC
Additional Option:
1	Basic version

TXU10-

仪表调试包 TXU10

用于可以PC编程调试的设备
程序设置+用于带USB接口的PC的连接线

Version:
AA	4 pin plug + ReadWin2000

READWIN-

Readwin 2000调试包 READWIN

Readwin 2000 Operation + Read. software

Memory Medium:
1	CD
Software:
AA	E+H

TMT182-

模块温度变送器 TMT182

Temperature transmitter, Protocol HART.
Application: RTD, TC, Ohm, mV.
2-wire 4-20mA, SIL2, galvanic isolation
Fault reaction: NAMUR NE 43.
Mounting: head form B, DIN43729.
UL listed.
GL (German Llyod) Marine.

Approval:
A	Non-hazardous area
Configuration Connection:
C	Thermocouple TC, non-SIL
Configuration Sensor Type:
B	Type B, +40...+1820oC, min. span500K
R	Type R, -50...1768oC, min. span500K
S	Type S, -50...1768oC, min. span500K
Y	Special version, TSP-no. to be spec.
Configuration:
B	Measuring range, see additional spec.
Additional Option:
A	Standard - DIN mounting set

TMT82-

模块温度变送器 TMT82

2-wire temperature transmitter.
Dual universal sensor input.
Galvanic isolation 2kV (input/output).
Application: RTD, TC, Ohm and mV.
::Highly reliable due to drift
detection and sensor back up.
::Optional also for safety critical applications
by means of SIL 2/3 acc. to IEC61508.

Approval:
AA	Non-hazardous area
Communication; Output Signal:
A	HART; 1x 4-20 mA
Electrical Connection:
1	Spring terminals, housing form B, DIN EN 50446
2	Screw terminals, housing form B, DIN EN 50446
Field Housing:
A	W/o, mounting set DIN standard
Configuration Universal Input:
D1	Ch1: TC, Ch2: inactive
D2	Ch1: TC, Ch2: TC
Sensor Type Input 1:
TB	Type B, 40...1820oC, min. span 500K IEC 584
TR	Type R, -50...1768oC, min. span 500K IEC 584
TS	Type S, -50...1768oC, min. span 500K IEC 584
Sensor Type Input 2:
AA	Inactive
TB	Type B, IEC 584
TR	Type R, IEC 584
TS	Type S, IEC 584
Input; Interconnection:
A1	PV = CH1; CH2 inactive
A2	PV = CH1; SV = CH2
>>Additional Approval:
LA	SIL conformity