TR13备件表

网站首页 ꄲ 备件表 ꄲ 温度和系统组件 ꄲ TR13备件表

TR13

订货号	描述	推荐	Tk	位置	组	有效
71249291	导热油 FDA认证 30g		A		没有被分类的
71312729	导热油 HSC 340, 100g		A		没有被分类的
71367427	垫片 Packing unit: 10 pieces		S		没有被分类的
71111513	陶瓷接线端		A	C	终端模块
71111514	陶瓷接线端		A	C	终端模块
71111515	陶瓷接线端		A	C	终端模块
52028179	垫圈 Profile gasket for coverStainless steel housing F15		S		没有被分类的
60017971	显示屏 Display LC for TA20J		S		没有被分类的
71043745	大气补偿过滤口 Consists of:filter plug plastic,Pressure compensation filter, O-ring.Usage: housing F15.Non Ex.		S		没有被分类的
71044061	设备包 2x screws, 2x springs, 2x spring rings,1x sealing CDI-connector		S		没有被分类的
71313382	连接器		S		没有被分类的
71142762	O型圈		S		没有被分类的
TS111-	iTHERM TS111 芯子 Replaceable.Metric version according DIN43735.	+	S	A	传感器
TPR100-	热电阻芯 TPR100 Mineral insulated cable (MgO)Replaceable insert acc.EN60751.max. measuring range: -200...600 oC(depending on configuration)	+	S	A	传感器
TA730-	保保护套管 TA730 In PTFE, PVDF, Tantalum or Titanium forthermowells **TW13, TR13 and TC13according to DIN Form F.Formula for calculating the totallength:Titanium or Tantalum:TL = U + 3mm (0.12in)PTFE:TL = U + 15mm (0.6in)PVDF:TL = U + 18mm (0.71in)		S	F	组装/铠装配件
TW13-	**保护套管 TW13 with flange connection.Protection tube acc. DIN 43772 /2F+3Fwelded version.		S	E	组装/铠装
TR88-	**热电阻 TR88 to screw-in.Neck DIN43772.Replaceable insert, MgO.max. measuring range: -200...600 oC(depending on configuration)		S		没有被分类的
TA20A-	**接线盒 TA20A Product being phased out,limited availability.Connection head to mount a measuringinsert with head transmitter or aconnection socket. To be mounted on anarmature or protective sleeve.Material: Aluminium epoxy resin coatingArea temperature : max. +100 oC;ATEX: +95 oC.		S	D	外壳/外壳附件
TA20B-	接线盒 TA20B Connecting head to mount a measuringinsert with head transmitter or aconnection socket. To be mounted on anarmature or protective sleeve.Material:Polyamid blackAmbient temperature: max. +80 oCProtection: IP65		S	D	外壳/外壳附件
TA20D-	**接线盒 TA20D Product Phased Out.Connection head to mount a measuringinsert with up to two head transmittersor a connection socket and one headtransmitter. For mounting on armatureor protection sleeve.Material: Aluminium, varnishedAmbient temperature: max. +100 oC;ATEX: +95 oC. Protection: IP66		S	D	外壳/外壳附件
TA20R-	**接线盒 TA20R Stainless steel AISI 316LW 1.4404. Max temperature 100 oC,ATEX: +95 oC. Protection class IP66/IP67		S	D	外壳/外壳附件
TA20W-	**接线盒 TA20W Product Phased Out.Connection head hinged to mount ameasuring insert with head transmitteror connection socket. To be mounted onan armature or a protection sleeve.Material: AluminiumArea temperature: max. +100 oC;ATEX: +95 oCProtection: IP66		S	D	外壳/外壳附件
TA21E-	接线盒 TA21E Retainer for terminal block or headtransmitter.Cover: srewable.Material: Aluminum.Max. temp.: +100 oC; ATEX +95 oC.Protection: IP65.		S	D	外壳/外壳附件
TMT84-	模块温度变送器 TMT84 Dual sensor input.Advanced diagnostics: sensor monitoring.Galvanic isolation 2kV.Application: RTC, TC, Ohm, mV.Current consumption: 11 mA.Mounting: head form B, DIN43729.Factory setup:CH1: Pt100, 3-wire, oCCH2: inactiveDiffering configuration optionalselectable.	+	S	B	电子的（传感器）
TMT85-	模块温度变送器 TMT85 Temperature transmitter with dualsensor input and advanced diagnosticsfor sensor monitoring.FOUNDATION Fieldbus protocol (ITK 5.0).Galvanic isolation 2 kV(sensor input to the output).Application: RTC, TC, Ohm, mV.Current consumption: 11 mA.Mounting: head form B, DIN43729.UL listed, CSA General Purpose.	+	S	B	电子的（传感器）
TID10-	温度变送器显示器TID10 to plug on.Dot-Matrix measured value display.12 DIP-switches buttom side.Settings:FF: Simulation, Write Lock.PA: Bus address, Write Lock.Compatible: TMT85, TMT84.	+	S	B	电子的（传感器）
READWIN-	Readwin 2000调试包 READWIN Readwin 2000 Operation + Read. software		T		没有被分类的
TXU10-	仪表调试包 TXU10 用于可以PC编程调试的设备程序设置+用于带USB接口的PC的连接线	+	A		没有被分类的
FXA195-	通讯接口 FXA195 Modem to connect HART field devicesto a computer via USB. Commissioning offield devices with software tool.:: To connect to a intrinsically safesignal circuit.:: SIL2, IEC61508.		T		没有被分类的
TA30A-	接线头 TA30A Retainer for terminal block or headtransmitter + optional display.Cover: low, hinged, optional window.Material: aluminium.Coating: polyester powder-coating.Colour: body blue, cover grey.Ambient temp.: -50...150 oC (housing).Protection: IP66/68, NEMA 4X (housing).		S	D	外壳/外壳附件
TA30D-	接线头 TA30D Retainer for 2 head transmitters orterminal blocks.Cover: high, hinged.Material: aluminium.Coating: polyester powder-coating.Colour: body blue, cover grey.Ambient temp.: -50...150 oC (housing).Protection: IP66/68, NEMA 4X (housing).		S	D	外壳/外壳附件
TA30P-	接线盒 TA30P Retainer for 2 head transmitters orterminal blocks.Cover: high, hinged.Material: Polyamid PA12 antistatic.Colour: black.Ambient temp.: -40...120oC (housing).Protection: IP65 (housing).		S	D	外壳/外壳附件
TMT180-	模块温度变送器 TMT180 Temperature transmitter,PC-programable.Application: RTD.2-wire 4-20mA.Fault reaction: NAMUR NE 43.Mounting: head form B, DIN EN50446.UL listed.	+	S	B	电子的（传感器）
TMT181-	**模块温度变送器 TMT181 Product being phased out,limited availability.Temperature transmitter,PC-programmable.Application: RTD, TC, Ohm, mV.2-wire 4-20mA, galvanic isolation.Fault reaction: NAMUR NE 43.Mounting: head form B, DIN EN50446.UL listed.	+	S	B	电子的（传感器）
TMT182-	**模块温度变送器 TMT182 Temperature transmitter, Protocol HART.Application: RTD, TC, Ohm, mV.2-wire 4-20mA, SIL2, galvanic isolationFault reaction: NAMUR NE 43.Mounting: head form B, DIN43729.UL listed.GL (German Llyod) Marine.	+	S	B	电子的（传感器）
TMT82-	模块温度变送器 TMT82 2-wire temperature transmitter.Dual universal sensor input.Galvanic isolation 2kV (input/output).Application: RTD, TC, Ohm and mV.::Highly reliable due to driftdetection and sensor back up.::Optional also for safety criticalapplications by means of SIL 2/3acc. to IEC61508.	+	S	B	电子的（传感器）
DIENST-	服务		A		没有被分类的
TR13-	**热电阻 TR13 with flange connection.Thermowell acc. DIN43772/2F+3F.Replaceable insert, MgO.max. measuring range: -200...600 oC.(depending on configuration).		S		没有被分类的
XPRFID-	RFID TAG as spare part available onlyfor instruments with option TZD, marking RFID TAG Spare RFID TAG Consists of:RFID TAG, fixing wire, crimp sleeve.		S		没有被分类的