TST434备件表

网站首页 ꄲ 备件表 ꄲ 温度和系统组件 ꄲ TST434备件表

订货号

规格

71044061

设备包

2x screws, 2x springs, 2x spring rings,
1x sealing CDI-connector

TXU10-

仪表调试包 TXU10

用于可以PC编程调试的设备
程序设置+用于带USB接口的PC的连接线

Version:
AA	4 pin plug + ReadWin2000

TMT180-

模块温度变送器 TMT180

Temperature transmitter,PC-programable.
Application: RTD.
2-wire 4-20mA.
Fault reaction: NAMUR NE 43.
Mounting: head form B, DIN EN50446.
UL listed.

Approval:
A	Non-hazardous area
Programming:
1	Via PC
2	Blocked
Measuring Range; Accuracy:
1	-200...650oC; 0.2K / 0,08% span
2	-50...250oC; 0.1K / 0,08% span
Configuration Connection:
3	RTD 3-wire
4	RTD 4-wire
Configuration Range:
XX	See additional spec., min span 10K
Additional Option:
A	Standard - DIN mounting set

TMT181-

模块温度变送器 TMT181

Temperature transmitter,PC-programmable.
Application: RTD, TC, Ohm, mV.
2-wire 4-20mA, galvanic isolation.
Fault reaction: NAMUR NE 43.
Mounting: head form B, DIN EN50446.
UL listed.

Approval:
A	Non-hazardous area
B	ATEX II1G Ex ia IIC T4/T5/T6
I	FM+CSA IS,NI,Class I,Div.1+2,Group ABCD
Configuration Connection:
3	RTD 3-wire
4	RTD 4-wire
Configuration Sensor Type:
1	Pt100, -200...850oC, min. span 10K, IEC751 (a = 0,00385)
Configuration:
B	Measuring range, see additional spec.
Additional Option:
A	Standard - DIN mounting set

TMT84-

模块温度变送器 TMT84

Dual sensor input.
Advanced diagnostics: sensor monitoring.
Galvanic isolation 2kV.
Application: RTC, TC, Ohm, mV.
Current consumption: 11 mA.
Mounting: head form B, DIN43729.
Factory setup:
CH1: Pt100, 3-wire, oC
CH2: inactive
Differing configuration optional
selectable.

Approval:
A1	Non-hazardous area
B1	ATEX II1G Ex ia IIC T4/T5/T6
Output Signal:
A	PROFIBUS PA
Electrical Connection:
1	Spring terminals, housing form B, DIN EN 50446
2	Screw terminals, housing form B, DIN EN 50446
Field Housing:
A	W/o, mounting set DIN standard
>Configuration Input:
B1	Ch1: RTD 3-wire, Ch2: inactive
C1	Ch1: RTD 4-wire, Ch2: inactive

TMT85-

模块温度变送器 TMT85

Temperature transmitter with dual
sensor input and advanced diagnostics
for sensor monitoring.
FOUNDATION Fieldbus protocol (ITK 5.0).
Galvanic isolation 2 kV
(sensor input to the output).
Application: RTC, TC, Ohm, mV.
Current consumption: 11 mA.
Mounting: head form B, DIN43729.
UL listed, CSA General Purpose.

Approval:
A1	Non-hazardous area
B1	ATEX II1G Ex ia IIC T4/T5/T6
Output Signal:
A	FOUNDATION Fieldbus H1
Electrical Connection:
1	Spring terminals, housing form B, DIN EN 50446
2	Screw terminals, housing form B, DIN EN 50446
Field Housing:
A	W/o, mounting set DIN standard
>Configuration Input:
B1	Ch1: RTD 3-wire, Ch2: inactive
C1	Ch1: RTD 4-wire, Ch2: inactive

FXA195-

通讯接口 FXA195

Modem to connect HART field devices
to a computer via USB. Commissioning of
field devices with software tool.
:: To connect to a intrinsically safe
signal circuit.
:: SIL2, IEC61508.

Approval:
G	ATEX II (1)GD [EEx ia] IIC
Additional Option:
1	Basic version

READWIN-

Readwin 2000调试包 READWIN

Readwin 2000 Operation + Read. software

Memory Medium:
1	CD
Software:
AA	E+H

TA20A-

**接线盒 TA20A

Product being phased out,
limited availability.
Connection head to mount a measuring
insert with head transmitter or a
connection socket. To be mounted on an
armature or protective sleeve.
Material: Aluminium epoxy resin coating
Area temperature : max. +100 oC;
ATEX: +95 oC.

Thermometer Connection:
A	M24x1.5
Cable Entry:
5	Gland M20
Colour:
A	Housing blue, cap grey
Labelling:
1	Standard E+H

TA30A-

接线头 TA30A

Retainer for terminal block or head
transmitter + optional display.
Cover: low, hinged, optional window.
Material: aluminium.
Coating: polyester powder-coating.
Colour: body blue, cover grey.
Ambient temp.: -50...150 oC (housing).
Protection: IP66/68, NEMA 4X (housing).

Connection Protection Tube Assembly:
1	Thread M24x1.5
Electrical Connection:
A	1x thread M20x1.5
C	1x thread G1/2
Display window:
1	W/o
>Cable Gland; Temp.Range; Protect. Type:
A1	1x Polyamide; -40...+100oC; IP68
A2	1x Polyamide ATEX; -20...+95oC; IP68 für dust-Ex
A3	1x brass ATEX; -20...+130oC; IP68, NEMA 4X for dust Ex

TMT182-

模块温度变送器 TMT182

Temperature transmitter, Protocol HART.
Application: RTD, TC, Ohm, mV.
2-wire 4-20mA, SIL2, galvanic isolation
Fault reaction: NAMUR NE 43.
Mounting: head form B, DIN43729.
UL listed.
GL (German Llyod) Marine.

Approval:
A	Non-hazardous area
B	ATEX II1G Ex ia IIC T4/T5/T6
I	FM+CSA IS,NI,Class I,Div.1+2,Group ABCD
Configuration Connection:
E	RTD 3-wire, non-SIL
F	RTD 4-wire, non-SIL
Configuration Sensor Type:
1	Pt100, -200...850oC, min. span 10K, IEC751 (a = 0,00385)
Configuration:
B	Measuring range, see additional spec.
Additional Option:
A	Standard - DIN mounting set

TMT82-

模块温度变送器 TMT82

2-wire temperature transmitter.
Dual universal sensor input.
Galvanic isolation 2kV (input/output).
Application: RTD, TC, Ohm and mV.
::Highly reliable due to drift
detection and sensor back up.
::Optional also for safety critical applications
by means of SIL 2/3 acc. to IEC61508.

Approval:
8C	FM+CSA IS, NI I/1+2/A-D
AA	Non-hazardous area
BA	ATEX II1G Ex ia IIC T4/T5/T6
Communication; Output Signal:
A	HART; 1x 4-20 mA
Electrical Connection:
1	Spring terminals, housing form B, DIN EN 50446
2	Screw terminals, housing form B, DIN EN 50446
Field Housing:
A	W/o, mounting set DIN standard
Configuration Universal Input:
B1	Ch1: RTD 3-wire, Ch2: inactive
C1	Ch1: RTD 4-wire, Ch2: inactive
Sensor Type Input 1:
A1	Pt100, -200...850oC, min. span 10K, IEC60751 (a = 0.00385)
Sensor Type Input 2:
AA	Inactive
Input; Interconnection:
A1	PV = CH1; CH2 inactive
>>Additional Approval:
LA	SIL conformity