Product Overview

• HI1131B

• Refillable single junction glass pH electrode

• Measuring range: 0 to 13 pH, Sample temperature range: 0 to 100 °C (32 to 212 °F), Sample pressure ≤0.1 bar; BNC connector

• Suitable for routine laboratory, beer and other sample measurement

• When using a new electrode, first remove the protective cap from the top and inspect the entire electrode. If salt crystals are found on the electrode head and inside the protective cap due to evaporation of the internal electrolyte through the junction, this does not affect normal use of the electrode and indicates that the electrode junction is functioning properly; simply rinse it off with clean water. During transport, air bubbles may form inside the glass bulb of the electrode head. In this case, gently shake the electrode as you would a common mercury thermometer to remove the bubbles. If the glass sensing membrane or junction of the electrode is relatively dry, soak the electrode in HI70300 electrode storage solution for at least 1 hour to keep the dry glass sensing membrane and junction moist; regular soaking is beneficial for the electrode.

• Note: Do not use distilled water or deionized water to store or soak the electrode, as this will cause the electrode sensor to fail

Application: Routine laboratory, beer, etc.