EZ1008 Промышленный анализатор цветности по платино-кобальтовой шкале

Measuring method:

Platinum-cobalt color is determined by the colorimetric method, based on ASTM 2120B standard method, with colorimetric measurement at 465 nm.

Measuring parameters:

Color in water (platinum-cobalt)

Application industries:

The EZ1008 online water quality color analyzer is suitable for platinum-cobalt color measurement in municipal drinking water.

Instrument features:

● The EZ1008 online water quality color analyzer has a measuring range of 1-500 Pt-Co and a detection limit as low as 1 Pt-Co

• The EZ1008 online water quality color analyzer offers high precision and accuracy:

•   - The sample line and analysis cuvette are rinsed with demineralized water to eliminate cross-contamination between samples and improve accuracy

•   - Low-volume analysis reduces reagent consumption, while the long optical path ensures high sensitivity

• The EZ1008 online water quality color analyzer uses the colorimetric method and features an ergonomic design with a compact size

• The built-in software of the EZ1008 online water quality color analyzer provides intelligent and automated functions for calibration, verification, startup and cleaning, helping to improve analytical performance, extend uptime and reduce operator maintenance

• The electronic section and wet chemistry section of the EZ1008 online water quality color analyzer are strictly separated, reducing the risk of failure of electrical components

• The EZ1008 online water quality color monitor offers a variety of measuring ranges. In addition to the standard measuring range, 10%/25%/50% of the standard measuring range can also be selected

• The EZ1008 online water quality color monitor provides a variety of analog and digital output options

• The EZ1008 online water quality color monitor supports multi-channel analysis (up to 8 channels optional)

• The EZ1008 online water quality color monitor has a high protection class. The main cabinet of the analyzer has a protection class of IP55, and the control panel has a protection class of IP65

• Reagent formula is disclosed

Technical specifications

• Measuring parameter    Color (platinum-cobalt)

• Measuring method    Based on ASTM 2120B standard method, with colorimetric measurement at 465 nm

• Standard measuring range    0 - 500 Pt-Co

• Detection limit    ≤ 1 Pt-Co

• Accuracy    ≤ 2% F.S. (using standard solution)

• Measuring interval    5 minutes (dilution + 5 minutes)

• Interference    High turbidity interference; fats, oils, proteins, surfactants and tar, etc. will cause interference.

• Automatic cleaning    Yes

• Verification    Automatic, frequency configurable

• Calibration    Two-point automatic calibration, frequency freely configurable

• Operating temperature    5-35℃ ±5℃ (avoid direct sunlight and rain), relative humidity 5-95% (non-condensing)

• Reagent requirements    Store between 10-30℃

• Flow rate    100 - 300 mL/min

• Sample temperature    10℃ - 30℃

• Power supply requirements    110-240VAC, 4A, 50/60Hz, maximum power consumption: 150VA

• Analog output    4-20mA, maximum 500 Ohm load, 1 channel as standard, up to 8 channels (optional)

• Digital output    Optional: RS232, Modbus (TCP/IP, RS485)

• Sample requirements    Maximum particle size 100μm, <0.1 g / L; turbidity <50 NTU

• Certifications    Compliant with CE / UL certification

• Enclosure protection    Analyzer main unit: IP55;

• PC panel: IP65

• Dimensions    690mmx 465mmx 330mm

• Shipping weight    30kg

Ordering information

• EZ1008.99001102    EZ1008 color analyzer, standard measuring range: 0-500 Pt-Co, 1 channel, 1 mA

• EZ1008.99001E02    EZ1008 color analyzer, standard measuring range: 0-500 Pt-Co, 1 channel, 1 mA+Modbus

Source: Public information from the HACH water quality website