EZ6000 Анализатор следовых количеств тяжёлых металлов

Measuring principle:

The Hach EZ6000 trace metals analyzer uses anodic stripping voltammetry (ASV), a sensitive and reliable electrochemical analysis method based on the current-voltage curve during oxidation at the electrode surface. This method involves the enrichment and stripping of metal ions at the electrode surface, and a selective oxidation reaction occurs at this electrode during the stripping phase. All steps of the analysis process, including sampling, sample transport, cleaning, and data exchange, are controlled via an industrial-grade PC panel.

Instrument features:

• The Hach EZ6000 trace metals analyzer is an anodic stripping voltammetry (ASV) heavy metal detector with a sensitive electrochemical analysis method, excellent performance, and simple operation

• This heavy metal detector has a built-in sample digestion unit for treating water samples containing complex metal substances or water samples with high organic content

• Controlled and communicated via an industrial panel computer, with up to eight-channel analysis

• This trace metals analyzer features automatic calibration and automatic cleaning, and the electronic gas components are fully separated from the wet section of the instrument for convenient maintenance

• Features expanded data communication and exchange functions

• Compared with other heavy metal detectors, the EZ6000 trace metals analyzer consumes less sample and reagent

• Excellent correlation with standard laboratory methods

Technical specifications

• Analysis method    Anodic stripping voltammetry (hot acid digestion or UV digestion)

• Measured parameters    Antimony (Sb), Arsenic (As), Cadmium (Cd), Hexavalent chromium (CrⅥ), Copper (Cu), Lead (Pb), Manganese (Mn), Mercury (Hg), Nickel (Ni), Selenium (Se), Silver (Ag), Tin (Sn), Zinc (Zn)

• Note: For analysis of cyanide and chromium, see the EZ1000/2000 series

• Working electrode    Carbon electrode/gold electrode

• Measuring range    See the datasheet for each parameter

• Measurement cycle    Within 40 minutes (including digestion)

• Calibration    Factory calibration (2-point calibration)

• Cleaning    Automatic cleaning, freely adjustable sequence

• Detection limit    ≤1 μg/l

• Accuracy/repeatability    Better than 5% (full scale)

• Protection class    Analyzer enclosure: IP55

• Touchscreen/industrial PC: IP65

• Ambient temperature    (10℃-30℃)±4℃

• Ambient humidity    5-95% relative humidity, non-condensing

• Reagent temperature    10℃-30℃

• Sample pressure    Regulated via an external overflow cup

• Sample flow rate    100-300ml/min

• Permissible particle size in sample    <100μm, < 0.1 g/l

• Turbidity< 50 NTU

• Power supply    220 - 240 VAC, 4 A, 50 Hz

• User interface/controller    Industrial panel PC, user interface is a 5.7” color TFT

• Communication    Optional Modbus TCP/IP, Modbus-RS232 -RS485

• Dimensions    69 x 46.5 x 33 cm(H x W x D)

• Weight    25kg

• Certifications    CE certification

Ordering guide

• EZ6003.990A1E02    Hexavalent chromium analyzer, principle: anodic stripping method, measuring range 0–25μg/L, communication: 1 mA output + Modbus RS485, 1 sample inlet

• EZ6203.990A1E02    Total lead analyzer, principle: anodic stripping method, measuring range 0–100μg/L, communication: 1 mA output + Modbus RS485, 1 sample inlet

• EZ6208.990A1E02    Total zinc analyzer, principle: anodic stripping method, measuring range 0–100μg/L, communication: 1 mA output + Modbus RS485, 1 sample inlet

• EZ6305.990A1E02    Total lead and total zinc analyzer, principle: anodic stripping method, measuring range 0–100μg/L, communication: 1 mA output + Modbus RS485, 1 sample inlet

• EZ6200.990A1E02    Total arsenic analyzer, principle: anodic stripping method, measuring range 0–20μg/L, communication: 1 mA output + Modbus RS485, 1 sample inlet

Source: Public information from the Hach Water Quality website