ULR Промышленный анализатор общего хлора сверхнизкого диапазона CL17sc

Instrument Features:

• Can accurately detect chlorine content in water above 8 ppb, monitor and optimize the dechlorination process.

• Uses the DPD colorimetric method to directly measure total chlorine content in water.

• The cumulative chlorine content function allows customers to understand the real impact of chlorine content passing through the reverse osmosis membrane, thereby more accurately predicting the efficiency and service life of the reverse osmosis membrane.

Measuring method:

Total chlorine: N,N-diethyl-1,4-phenylenediamine photometric method (DPD method)

Technical specifications

• Measuring parameter    Total chlorine

• Measuring method    Total chlorine: N,N-diethyl-1,4-phenylenediamine photometric method (DPD method)

• Measuring range    0.008 - 5 mg/L Cl2

• Accuracy    ±5% or ±0.01mg/L (whichever is greater), 0-4 mg/L;

• ±10%, 4-5mg/L

• Detection limit    0.008 mg/L Cl2 , 25℃

• Measuring cycle    2.5min

• Inlet pressure    0.3 - 5.2 bar (4.5 - 75 psig), supplied to Y-strainer

• 0.1 - 0.3 bar (1.5 - 5 psig), supplied to analyzer

• Inlet    OD ¼inch polyethylene tubing, quick connector

• Drain    OD ½inch hose

• Air purge    Optional 3/8inch quick connector and fittings; 0.003m3/min at maximum 1.38 bar

• Sample requirement    Y-strainer with 40 mesh or higher screen

• Flow rate    Flow rate through the instrument is 60 - 200 mL/min

• Sample temperature    5 - 40 °C

• Operating temperature range    5 - 40 °C

• Operating humidity    0-90% relative humidity, non-condensing

• Interferences    Oxidizing agents such as bromide, chlorine dioxide, permanganate and ozone will cause positive errors.

• Reagent consumption    0.5 L buffer solution and 0.5 L indicator solution used within 31 days

• Certifications    CE compliant: EN 61326-1, CISPR 11, EN 50581

• ACMA RCM

• Korea KC certification

• North America: FCC Supplier's Declaration of Conformity, IEC/EN 60529, ICES-003

• Light source    LED, measured at 510 nm, optical path length 1cm,

• Waterproof rating    IP66

• Installation    Wall-mounted

• Power requirement (voltage)    12 VDC, maximum 400 mA (powered by controller)

• Dimensions (H x W x D)    342 mm x 329 mm x 177 mm

• Weight    4.1 kg

Ordering guide

• Ordering information

• 9790200    ULR CL17 sc  Total chlorine analyzer, with riser mounting kit, without reagents and SC controller

• 9790300    ULR CL17 sc  Total chlorine analyzer, with pressure regulator mounting kit, without reagents and SC controller

• Consumables

• 8560400    CL17sc tubing kit (pre-assembled)

• 8573100-CN    CL17sc colorimetric cell cleaning kit

• Accessories

• 8568200    CL17sc calibration kit

• 8573200    CL17sc calibration kit refill pack

• 8560500    CL17sc riser mounting kit

• 8565700    CL17sc pressure regulator mounting kit

• Reagents

• 9791100S-CN    ULR CL17 sc  Total chlorine reagent kit

Source: Public information from HACH Water Quality website