Product Overview

• Measuring range: 0 to 13 pH, sample temperature range: 0 to 80 °C (32 to 176 °F), sample pressure ≤3 bar; BNC+phono connector

• Dedicated: HI98191, HI98183, HI98184, HI98185 and other pH meters, with built-in signal amplifier and temperature sensor, suitable for routine laboratory and field water quality monitoring..

• When using a new electrode, first remove the protective cap from the top and inspect the entire electrode. If salt crystals are found on the electrode head and inside the protective cap due to evaporation of the internal electrolyte through the dialysis membrane, this does not affect normal use of the electrode and indicates that the electrode dialysis membrane is functioning properly; simply rinse it off with clean water. During transport, air bubbles may form inside the glass bulb of the electrode head. In this case, gently shake the electrode as you would a common mercury thermometer to remove the bubbles. If the glass sensing membrane or dialysis membrane head of the electrode is relatively dry, soak the electrode in HI70300 electrode storage solution for at least 1 hour to keep the dry glass sensing membrane and dialysis membrane moist; frequent soaking is beneficial to the electrode.

• Friendly reminder : Do not use distilled water or deionized water to store or soak the electrode, as this will cause the electrode sensor to fail

• General-purpose glass formulation

• Flat-tip bulb

• Titanium body

• PTFE junction

• BNC + RCA connector