Overview
Intelligent pH Electrode for Meat Products The FC231D is a specialised electrode designed for use in the food industry. It is suitable for pH measurement of meat products and can be fitted with a knife blade. This electrode is supplied complete with a 1m white food cable and 7-pin DIN connector.
Low Temperature Glass Formulation The glass tip uses a special LT glass formulation with a lower resistance of approximately 50 megaohms compared to general purpose (GP) with a resistance of about 100 megaohms. This is beneficial since many food products are stored at low temperatures. As the temperature of the glass decreases in the sample, the resistance of the LT glass will increase approaching that of GP glass at ambient temperatures.
If using GP glass, the resistance would increase above the optimum resistance for the high impedance input of a pH meter. The FC231D is suitable to use with samples that measure from 0 to 50°C. PVDF Body Polyvinylidene fluoride (PVDF) is a food grade plastic that is resistant to most chemicals and solvents, including sodium hypochlorite.
It has high abrasion resistance, mechanical strength and resistance to ultraviolet and nuclear radiation. PVDF is also resistant to fungal growth. Open Junction Reference Suspended solids and proteins found in food products will clog a conventional ceramic reference junction.
This clogging will impede the measurement circuit between the indicating electrode and the internal reference resulting in slower response time, erratic readings, and frequent electrode replacement. The open junction design consists of a solid gel interface (viscolene) between the sample and internal Ag/AgCl reference. This interface not only prevents silver from entering the sample, but also makes it impermeable to clogging, resulting in a fast response and stable readings.
DIN Connector The FC231D Smart pH electrode has a DIN connector that can only be used with the HI-98140, HI-98150, HI-98230, and HI-98240 portable meters. Built-In Microchip The built-in microchip stores sensor type, serial number and calibration information including date, time, offset, slope, probe condition, and buffers used. This information is automatically retrieved by edge® once the electrode is plugged in.
The ability to transfer information allows for hot swapping of probes without having to recalibrate. All pH measurements are performed within the electrode and transferred digitally to the meter. This overcomes any noise issues associated with the traditional high impedance analogue measuring system.
Electrical noise can be generated from a built in temperature sensor and while working in a humid environment. Conical Glass Tip The conical shaped tip design allows for penetration into solids, semi solids, and emulsions for the direct measurement of pH in food products. Stainless Steel Blades available for purchase separately An optional stainless steel blade is attached to the probe for easy meat penetration, even in frozen samples.
Slicing into the meat will allow for the pH glass and reference junction to be in contact with the sample, allowing for a direct pH measurement without extensive sample preparation. The FC098 (20 mm) and the FC099 (35mm) are two stainless steel penetration blades to be used with the FC231D.
Specifications
| Parameter | Value |
|---|---|
| SKU | FC231D |
| Reference | Single, Ag/AgCl |
| Junction | Open |
| Connector | DIN |
| Electrolyte | Viscolene |
| Max Pressure | 0.1 bar |
| Range | 0 to 12 pH; 0 to 50°C (32 to 122°F) |
| Tip Shape | Conic (6 x 10 mm) |
| Temperature Sensor | No |
| Amplifier | No |
| Body Material | PVDF |
| Cable | Coaxial; 1 m (3.3') |
| Recommended Use | Meat, semi-frozen products |
Accessories
- HI-70004P: HI-70004P pH 4.01 Buffer Sachets, 25 x 20 mL sachets
- HI-70007P: HI-70007P pH 7.01 Buffer Sachets, 25 x 20 mL sachets
- HI-70010P: HI-70010P pH 10.01 Buffer Sachets, 25 x 20 mL sachets
- HI-70300L: HI-70300L pH Electrode Storage Solution, 500 mL
Related Products
HANNA InstrumentsSpare pH module for HI-7609829/HI-7629829 series of probes
HANNA InstrumentsT-Type Glass Body pH Electrode
HANNA InstrumentsAmpHel® ORP Electrode with Replaceable Battery
HANNA InstrumentsDirect Soil Probe
HANNA InstrumentspH Electrode with Ground Sleeve
HANNA InstrumentspH EC TDS and Temperature Electrode
HANNA InstrumentspH electrode with PTFE junction. High temperature glass bulb
HANNA Instruments