Overview
Care & Maintenance It is recommended that you calibrate the electrode before using. For best results, calibrate frequently. Additionally, the instrument must be calibrated: When high accuracy is required At least once a month with regular use To ensure accuracy with measurements: Use fresh calibration standards for each calibration Rinse the tester with purified water and dry off with a soft tissue before calibrating or taking measurements Calibrate monthly with regular use or more often with frequent use Inspect the tester to see if any foreign material is detected in the openings housing the electrodes A more thorough cleaning may be made using a non-abrasive detergent, and a soft material such as cardboard, to dislodge the material Rinse thoroughly with a stream of running tap water and jetting the stream through the opening.
Shake excess water and rinse with purified water. Dry off and recalibrate the tester before using Store with the protective cap on Check the instrument manual for guidance on how to enter calibration mode and use the calibration standards as instructed.
Related Products
HANNA Instruments1382mg/L (ppm) TDS Calibration Solution, 230mL bottle
HANNA Instruments111 800uS/cm Conductivity Solution, 230 mL bottle
HANNA Instruments5000µS/cm Conductivity Solution, 230mL bottle
HANNA InstrumentsPotassium Iodide Powder Packets, 100 Packets
HANNA InstrumentsCombination Buffer Kit 10.01 & 7.01 pH 5 x 5 Sachets & Certificate of Analysis
HANNA InstrumentsCombination Buffer Kit 10.01 & 7.01 pH 5 x 5 20ml Sachets
HANNA InstrumentsCombination pH/TDS Buffer Kit 1500 ppm & 7.01 pH
HANNA Instruments