Overview
HI-7014 Pool Line Free Chlorine Checker Handheld Colorimeter Suitable for use in swimming pools, hot tubs and spas. The presence of free chlorine, in combination with a correct pH value, ensures that bathing water is clear and disinfected. The concentration of free chlorine in swimming water should be measured regularly.
The HI-7014 bridges the gap between simple chemical testing kits and professional instruments. This checker uses an EPA approved DPD method. Specifically for free chlorine More accurate than chemical testing kits Large LCD Small size, great convenience One-button operation Operates on 1 single AAA battery Four easy steps to testing Step one – Add a sample to the included cuvette Step two – Insert sample into the Checker HC and press the button to zero Step three – Remove sample and add reagent as stated in the manual Step four – Reinsert sample and press the button to measure your results Safety Data Sheets When using any form of chemical, such as Hanna reagents, it is important you download the relevant safety data sheet and make yourself aware of any precautions you should take when handling the chemical.
You can access our library of safety data sheets and download a copy by following the link below. Please note that the '-' in HI- products should be removed from all searches to find the correct information. CLICK HERE
Specifications
| Parameter | Value |
|---|---|
| SKU | HI7014 |
| Range | 0.00 to 2.50 ppm (mg/L) |
| Resolution | 0.01 ppm (mg/L) |
| Precision | 3% of reading ±0.03 ppm (mg/L) @ 25°C |
| Light Source | LED @ 525 nm |
| Light Detector | Silicon photocell |
| Environment | 0 to 50°C (32 to 122°F); RH max 95% non-condensing |
| Battery Type | (1) 1.5V AAA |
| Auto-off | After 2 minutes of non-use and after read |
| Dimensions | 81.5 x 61 x 37.5 mm (3.2 x 2.4 x 1.5”) |
| Weight | 64 g (2.25 oz.) |
| Method | Adaptation of USEPA method 330.5. The reaction between free chlorine and the DPD reagent will cause a pint tint in the sample. |
| Ordering information: | Supplied with sample cuvettes and caps, reagent starter kit (6 tests), battery and instructions |
| Reagent set | HI-7014-25 (25 tests) |
| Calibration set | HI-7014-11 |
| PLEASE NOTE: | In some cases, samples may contain other parameters which may interfere with results |
| Interference may be caused by: | Bromine, Iodine, Ozone, Oxidized forms of Chromium and Manganese. In case of water with hardness greater than 500 mg/L CaCO 3 , shake the sample for approximately 2 minutes after adding the powder reagent. If the water used for this procedure has an alkalinity value greater than 250 mg/L CaCO 3 or acidity value greater than 150 mg/L CaCO 3 , the colour of the sample may develop only partially, or may rapidly fade. To resolve this, neutralise the sample with diluted HCl or NaOH. |
Accessories
- HI-7014-11: HI-7014-11 Free Chlorine Certified Standard Kit
Manuals and documentation
Related Products
HANNA InstrumentsPCA320 Free & Total Chlorine, pH and Temperature Analyser
HANNA InstrumentsFree & Total chlorine, pH & °C controller/analyser
HANNA InstrumentsPCA310 Free & Total Chlorine Analyser
HANNA InstrumentsPool and Spa Controller
HANNA InstrumentsInjection saddle for 63 mm pipe diameter half-inch thread
HANNA InstrumentsFlow Cell Tubing 10 metres
HANNA InstrumentsPool Line Professional Waterproof Portable pH/ORP/ISE Meter
HANNA Instruments