Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

HI93718-03

HI93718-03
Iodine Reagents, 300 tests
HANNA Instruments HI93718-03
Reagents for 300 iodine tests The HI-93718-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow an adapt

Overview

Reagents for 300 iodine tests The HI-93718-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow an adaptation of the DPD Method in which the reaction between iodine and reagent causes a pink tint in the sample. By simply adding the reagent to the sample, a reaction will take place and a compatible benchtop or portable meter can be used to determine the concentration from the colour that is produced.

The results will be displayed in mg/L (ppm) of iodine. These reagents are designed to be used with samples that have an expected range of 0.00 to 12.50 mg/L iodine. Ideal for use with the HI-96718 portable photometer.

Tip for an accurate measurement It is important that the sample does not contain any debris. When the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.

Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette. Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.

After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.

Specifications

ParameterValue
SKUHI93718-03
PackagePacket
Quantity300 tests
MethodAdaptation of the Standard Methods for the Examination of Water and Wastewater, 20th edition, DPD method. The reaction between iodine and the reagent causes a pink tint in the sample.