Overview
300 cyanuric acid tests The HI-93722-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. These reagents follow an adaptation of the turbidimetric method. The reaction between cyanuric acid and reagent causes a white suspension in the sample.
By simply adding the packet of HI-93722-03 reagent to the sample, a reaction will take place and a compatible benchtop or portable meter can be used to determine the concentration from the colour that is produced. The results will be displayed in mg/L (ppm) of cyanuric acid. These reagents are designed to be used with samples that have an expected range of 0 to 80 mg/L cyanuric acid.
Tip for an accurate measurement It is important that the sample does not contain any debris. When the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette. Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.
After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.
Specifications
| Parameter | Value |
|---|---|
| SKU | HI93722-03 |
| Package | packets, bottle |
| Quantity | 300 tests |
| Method | Turbidimetric Method |
Related Products
HANNA InstrumentsPotassium Hydrogen Phthalate, 20g
HANNA InstrumentsReplacement reagents for Ammonia (fresh water)
HANNA InstrumentsReagents for HI-749 Chromium Low Range Checker (0-300 ppb)
HANNA InstrumentsSodium Thiosulfate Pentahydrate Reagent, 20g
HANNA InstrumentsPhosphorus Reagent, Acid-Hydrolyzable, Ascorbic Acid Method with Bar Code
HANNA InstrumentsIron, (Fe2+ & Fe3+) HR
HANNA InstrumentsReplacement reagents for Ozone
HANNA Instruments