Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

HI93730-03

HI93730-03
Molybdenum Reagents, 300 tests
HANNA Instruments HI93730-03
The HI-93730-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of the mercaptoacetic acid metho

Overview

The HI-93730-03 are high quality reagents that are pre-measured, allowing for users to achieve fast and accurate colorimetric measurements. The method is an adaptation of the mercaptoacetic acid method. The reaction between molybdenum and the reagents causes a yellow tint in the sample.

By simply adding the reagents to the sample, a reaction will take place and a compatible benchtop or portable meter can be used to determine the concentration from the colour that is produced. The results will be displayed in mg/L (ppm) of molybdenum. These reagents are designed to be used with samples that have an expected range of 0.0 to 40.0 mg/L molybdenum.

Tip for an accurate measurement It is important that the sample does not contain any debris. When the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.

Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette. Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.

After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.

Specifications

ParameterValue
SKUHI93730-03
PackagePacket
Quantity300 tests
Methodmercaptoacetic acid method