Overview
HI-93739-01 are high quality, pre-measured reagents that allow users to achieve fast and accurate colorimetric measurements. The method is an adaptation of EPA method 340.1 and the SPADNS method. The reaction between fluoride and the reagent causes a colour change in the sample.
By simply adding the reagents to the sample in the correct order, the reaction will take place and Hanna’s compatible HI-96739 & HI-97739 portable photometers will determine the concentration from the colour that is produced. The results will be displayed in mg/L (ppm) of fluoride. These reagents are designed to be used with samples that have an expected range of 0.0 to 20.00 mg/L fluoride.
Tip for an accurate measurement It is important that the sample does not contain any debris. When the cuvette is placed into the measurement cell, it must be dry outside and completely free of fingerprints, oil or dirt. Wipe it thoroughly with HI-731318 or a lint-free cloth prior to insertion.
Shaking the cuvette can generate bubbles, causing higher readings. To obtain accurate measurements, remove such bubbles by swirling or by gently tapping the cuvette. Do not let the reacted sample stand for too long after reagent is added, or accuracy will be lost.
After the reading, it is important to discard the sample immediately, otherwise the glass might become permanently stained.
Specifications
| Parameter | Value |
|---|---|
| SKU | HI93739-01 |
| Package | Bottles |
| Quantity | 100 tests |
| Method | Adaptation of the EPA Method 340.1 and the SPADNS Method |
Related Products
HANNA InstrumentsPotassium Hydrogen Phthalate, 20g
HANNA InstrumentsReplacement reagents for Ammonia (fresh water)
HANNA InstrumentsSodium Thiosulfate Pentahydrate Reagent, 20g
HANNA InstrumentsPhosphorus Reagent, Acid-Hydrolyzable, Ascorbic Acid Method with Bar Code
HANNA InstrumentsIron, (Fe2+ & Fe3+) HR
HANNA InstrumentsReplacement reagents for Ozone
HANNA InstrumentsReplacement reagents for pH x 100
HANNA Instruments