Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

HI93755-03

HI93755-03
Alkalinity Reagent, 300 tests
HANNA Instruments HI93755-03
Reagent for Alkalinity 0 to 500 mg/L The HI-93755-03 Alkalinity liquid reagent is suitable for use with Hanna photometers with an Alkalinity range of 0 to 500mg/L and provides enough reagent for 300 t

Overview

Reagent for Alkalinity 0 to 500 mg/L The HI-93755-03 Alkalinity liquid reagent is suitable for use with Hanna photometers with an Alkalinity range of 0 to 500mg/L and provides enough reagent for 300 tests. Please note this reagent is not recommended for salt water applications. MEASUREMENT PROCEDURE Select the Alkalinity method using the procedure described in the METHOD SELECTION section.

Note: If tutorial mode is disabled, follow the measurement procedure below. If the tutorial mode is enabled, press Measure and follow the messages on the screen. Fill the cuvette with 10 mL of unreacted sample (up to the mark).

Replace the plastic stopper and the cap. Insert the cuvette into the holder and ensure that the notch on the cap is positioned securely in the groove. Press Zero.

The display will show “-0.0-” when the meter is zeroed and ready for measurement. Remove the cuvette. 10 mL METHOD PROCEDURE Use a 1 mL syringe and add 1mL of HI-93755 Alkalinity Reagent to the sample.

Replace the plastic stopper and the cap. Invert 5 times to mix. Insert the cuvette into the holder and ensure that the notch on the cap is positioned securely in the groove.

Press Read to start reading. The instrument displays the results in mg/L of calcium carbonate (CaCO 3 ). Interference may be caused by: Chlorine must be absent, to remove the interference add one drop of HI-93755-53 Chlorine Removal Reagent to the unreacted sample.