iTEMP TMT162 诊断代码
共 34 条诊断代码 · 来源手册 BA01801TZH_0424-00.pdf
对应产品：iTEMP TMT162, De campo Transmisor （查看参数与选型）
| 代码 | 信号 | 简述 | 行为 | 页码 |
|---|---|---|---|---|
| 016 | M | Sensor available again | Warning | P34 |
| 041 | F | Sensor breakage detected | Alarm | P34 |
| 042 | M | Sensor corroded | Warning | P34 |
| 043 | F | Sensor short circuit detected | Alarm | P34 |
| 044 | M | Sensor drift detected | Warning | P34 |
| 047 | S | Sensor limit 1/2 reached | Warning | P34 |
| 048 | M | Drift detection not possible | Warning | P34 |
| 062 | F | Sensor connection faulty | Alarm | P34 |
| 105 | M | Calibration interval | Warning | P34 |
| 145 | F | Compensation reference point | Alarm | P34 |
| 201 | F | Electronics faulty | Alarm | P34 |
| 221 | M | Reference sensor defective | Alarm | P34 |
| 241 | F | Firmware faulty | Alarm | P34 |
| 242 | F | Firmware incompatible | Alarm | P34 |
| 261 | F | Electronics module is defective | Alarm | P34 |
| 283 | F | Memory content inconsistent | Alarm | P34 |
| 286 | F | Data storage inconsistent | Alarm | P34 |
| 401 | C | Factory reset active | Warning | P34 |
| 402 | C | Initialization active | Warning | P34 |
| 410 | F | Data transfer failed | Alarm | P34 |
| 411 | C | Upload/download active | Warning | P34 |
| 412 | C | Processing download | Warning | P35 |
| 435 | F | Linearization faulty | Alarm | P35 |
| 438 | M | Dataset different | Warning | P35 |
| 439 | F | Dataset different | Alarm | P35 |
| 485 | C | Simulation of the process variable is active | Warning | P35 |
| 491 | C | Simulation of the current output is active | Warning | P35 |
| 495 | C | Diagnostic event simulation active | Warning | P35 |
| 531 | F | Factory adjustment missing | Alarm | P35 |
| 537 | F | Configuration | Alarm | P35 |
| 583 | C | Simulation input | Warning | P35 |
| 801 | S | Supply voltage too low | Alarm | P35 |
| 825 | S | Electronics temperature out of range | Warning | P35 |
| 844 | S | Process value out of specification | Warning | P35 |
需要 iTEMP TMT162 的备件或技术支持？
联系我们
，或致电 0755-82221901。