SOLITAX Анализатор мутности / взвешенных веществ sc

Principle of Operation

• Inside the measurement probe of the SOLITAX™ sc online suspended solids monitor, a built-in LED light source is positioned at a 45° angle and emits 880 nm near-infrared light into the sample. After the beam is scattered by suspended particles in the sample, scattered light at a 90° angle to the incident light is formed, detected by the detector in that direction, and calculated to obtain the turbidity of the sample. When measuring sludge concentration, scattered light at a 140° angle to the incident light is formed and detected by the rear detector in that direction. The suspended solids monitor then calculates the signal intensities detected by the front and rear detectors to provide the sludge concentration value.

• Because the LED emits 880 nm near-infrared light, the inherent color of the sample does not affect the measurement result of the suspended solids monitor.

Typical Applications

The SOLITAX™ sc online suspended solids monitor can be used in wastewater treatment plants to measure sludge concentration and evaluate activated sludge quality or the entire biological treatment process; in waterworks for turbidity measurement of filter backwash water, raw water, and sedimentation tank effluent; and for monitoring water quality in industrial production processes / circulating cooling water.

Instrument Features

• The SOLITAX™ sc online suspended solids monitor uses dual-beam infrared and scattered-light photometer detection technology.

• The SOLITAX™ sc turbidity/suspended solids detector can measure both turbidity and suspended solids (or sludge) concentration.

• The SOLITAX™ sc online suspended solids monitor uses an 880 nm near-infrared LED light source and can compensate for sample color.

• The SOLITAX™ sc online suspended solids monitor offers multiple measuring ranges, sensor materials, and installation methods to meet various application requirements.

• The SOLITAX™ sc online suspended solids monitor enables continuous measurement with fast response, suitable for continuous monitoring and control

• The SOLITAX™ sc turbidity/suspended solids detector features a self-cleaning system, stable operation, and low maintenance

Technical Specifications

• Measuring unit:    Selectable NTU, FNUg/L, mg/L, ppm, or % solids

• Measuring accuracy:    Turbidity less than 1% of reading, or ±0.001 NTU, whichever is greater

• Suspended solids:    Less than 5% of reading (depending on sludge homogeneity)

• Repeatability:    Turbidity: less than 1% of reading;

• Suspended solids: less than 3% of reading (whichever is greater)

• Response time:    Approx. 1 second

• Installation method:    Pipe insertion installation with ball valve, minimum pipe diameter 100 mm (carbon steel and stainless steel); immersion installation with poolside fixed mounting

• Sample flow rate:    3 m/s

• Operating temperature:    0～40℃

• Sample temperature:    0～40℃

• Sample pressure:    6 Bar

• Probe dimensions:    Insertion type: 60×315 mm

• Immersion sensor: 60×200 mm

• Probe weight:    Insertion type: 2.4 KG

• Immersion type: stainless steel 1.38 KG, PVC 0.52 KG

• Cable length:    Standard: 10 m

• Length 100 m

• Additional cables optional: 7.6 m, 15.2 m, 30.5 m

Spare Parts

Accessory Information

• LZX414.00.10000    Immersion installation accessory

• 57384-00    Pipe insertion installation accessory

• 69405-00    Dedicated installation accessory for turbidity monitoring of filter backwash water in waterworks

• LZX050    Scraper blade, pack of 5

Ordering Guide

SOLITAXTMsc turbidity/suspended solids analyzer, standard configuration includes: sc200 controller, probe, operation manual, installation accessories

Immersion Installation

• 2983400    SOLITAXTMsc turbidity/suspended solids analyzer, including sc200 controller, T-linesc PVC probe (0.001-4000 NTU) with self-cleaning scraper blade

• 2983500    SOLITAXTMsc turbidity/suspended solids analyzer, including sc200 controller, Ts-linesc stainless steel probe (0.001-4000 NTU, 0.001 mg/L~50 g/L), with self-cleaning scraper blade

• 2983600    SOLITAXTMsc turbidity/suspended solids analyzer, including sc200 controller, Hs-linesc stainless steel probe (0.001-4000 NTU, 0.001 mg/L~500 g/L), with self-cleaning scraper blade

• Pipe Insertion Installation

• 2983700    SOLITAXTMsc turbidity/suspended solids analyzer, including sc200 controller, Inlinesc stainless steel probe (0.001-4000 NTU, 0.001 mg/L~50 g/L), with self-cleaning scraper blade

• 2983900    SOLITAXTMsc turbidity/suspended solids analyzer, including sc200 controller, Highlinesc high-range probe (0.001-4000 NTU, 0.001 mg/L~500 g/L), with self-cleaning scraper blade

• Probe Standalone Order No.

• Immersion type

• LXV423.99.10000    T-Linesc turbidity probe, PVC material, with self-cleaning scraper blade (0.001-4000 NTU, 0~300 mg/L)

• LXV423.99.10100    TS-Linesc turbidity/suspended solids probe, PVC material, with self-cleaning scraper blade (0.001-4000 NTU, 0.001 mg/L~50 g/L)

• LXV423.99.00100    TS-Linesc turbidity/suspended solids probe, SS material, with self-cleaning scraper blade (0.001-4000 NTU, 0.001 mg/L~50 g/L)

• LXV423.99.10200    HS-Linesc turbidity/suspended solids probe, PVC material, with self-cleaning scraper blade (0.001-4000 NTU, 0.001 mg/L~500 g/L)

• LXV423.99.00200    HS-Linesc turbidity/suspended solids probe, SS material, with self-cleaning scraper blade (0.001-4000 NTU, 0.001 mg/L~500 g/L)

• Pipe insertion type

• LXV424.99.00100    Inlinesc turbidity/suspended solids probe, SS material, with self-cleaning scraper blade (0.001-4000 NTU, 0.001 mg/L~50 g/L)

• LXV424.99.00200    Highlinesc turbidity/suspended solids probe, SS material, with self-cleaning scraper blade (0.001-4000 NTU, 0.001 mg/L~500 g/L)

• Controller sc200 not included, must be ordered separately

Source: Public information from the HACH Water Quality website