Benefits
- Can be installed with “zero point adjustment upward” and “zero point adjustment downward”
- The liner is particularly suitable for drinking water applications requiring special certifications
- Improved low-flow measurement accuracy for leak detection (NBR or EPDM liner)
- Suitable for underground installation and permanent immersion (IP68) or underwater installation
- Integrated grounding electrode – for many applications, grounding rings are not required
- Short delivery time
- SITRANS F M product line – thanks to Siemens' integrated platform, MAG 5000 / 6000 transmitters can be used with all product combinations (MAG 5100 /3100/1100):
• Unique SensorProm technology – stores important sensor-related data and transmits the data to the transmitter. This enables simple and flexible pairing with sensors.
• Plug and play – transmitters can be conveniently replaced and commissioned on site in just a few minutes
• “Hot-swappable” - can be replaced during operation
• Flexible installation – saves installation space or allows separate installation
• Proven calibration ensures accurate flow measurement. Every Siemens flowmeter is calibrated in a calibration facility certified in accordance with ISO/IEC 17025.
• Service and diagnostics – MAG on-site verification with traceable certification. Regular calibration of the SITRANS F M verifier ensures on-site measurement accuracy.
Details
|
Measuring range |
0 - 10 m/s |
|---|---|
|
Nominal size |
DN 15 to DN 2000 (1" to 78") |
|
Accuracy |
0.2 % ±2.5 mm/s |
|
Operating pressure |
Up to 16 bar |
|
Ambient temperature |
-40 to 70 °C |
|
Medium temperature |
-10 to 70 °C |
|
Liner |
EPDM NBR hard rubber, Ebonite hard rubber |
|
Electrodes |
Hastelloy C-276 Integrated grounding electrode |
|
Material |
Carbon steel with corrosion-resistant two-component epoxy resin coating |
|
Drinking water application certifications |
EPDM: WRAS, NSF/ANSI Standard 61, DVGW 270, ACS and BelgAqua NBR: NSF/ANSI Standard 61, WRAS Ebonite: WRAS |
|
Custody transfer certifications |
OILM R 49 MI-001 PTB K7.2 (Germany) BEV OE12/C040 (Austria) |
|
General certifications |
MCERTS Sira certificate No. MC080136/00 |
Application examples: water supply and drainage, wastewater and custody transfer water meters or cold water meters.
Advantages
- DN 15 to DN 1200/2000 (½" to 48"/78")
- The MAG 5100 W storage concept ensures short delivery times
- Connection flanges EN 1092-1 (DIN 2501), ANSI, AWWA, AS and JIS
- NBR hard rubber and hard rubber liners for all water treatment applications
- EPDM liner complies with drinking water certifications
- Stainless steel integrated grounding and measuring electrodes
- The tapered liner design enables leak detection and improves low-flow measurement accuracy
- Drinking water certification
- Suitable for direct burial underground and permanent immersion in water
- Custody transfer certification
- Built-in length complies with ISO 13359; this standard covers sizes up to DN 400.
- The SENSORPROM unit automatically reads calibration values and configuration parameters, simplifying commissioning
- Patented built-in verifier, which can be operated using SENSORPROM signature technology
- Custody transfer option for water supply metering, type approval OIML R49, verified in accordance with MI-001 - 0D inlet / 0D outlet devices
- Type approval OIML R49
- Complies with ISO 4064 and EN14154 standards for mechanical flowmeters
- PTB K7.2
- Kiwa water approval
- FM fire water meter for automatic fire protection systems (Class No. 1044).
- Meets EEC standards: PED EN 1092-1 flange 2014/68/EU pressure directive
- On-site upgrade to IP68/NEMA 6P for standard sensors
- Type approval for marine equipment (ABS, Bureau Veritas, DNV, GL, Lloyd's Register)
Application
SITRANS F M electromagnetic flow sensors are mainly used in the following areas:
- Water abstraction
- Water treatment
- Water network distribution (leak detection management)
- Custody transfer water metering
- Irrigation
- Wastewater treatment
- Filtration systems (e.g. reverse osmosis and ultrafiltration systems)
- Industrial water
Mode of operation
The flow measurement principle is based on Faraday's law of electromagnetic induction; the sensor converts the flow signal into a voltage signal proportional to the fluid flow velocity.
Integration
A complete flowmeter consists of a flow sensor and a SITRANS F M MAGFLO MAG 5000, 6000 or 6000 I transmitter.
The flexible communication concept USM II simplifies the integration and upgrade of the flowmeter with many different bus systems. These bus systems include: HART, DeviceNet, PROFIBUS DP and PA, FOUNDATION Fieldbus H1, Modbus RTU/RS 485.
Technical specifications
|
Product features |
MAG 5100 W (7ME6520) |
MAG 5100 W (7ME6580) |
|---|---|---|
|
EPDM or NBR liner |
Hard rubber liner |
|
|
Design and nominal size |
Tapered sensor (octagonal liner): DN 15 ... 40 (½" … 1½") |
|
|
Conical sensor: DN 50 … 300 (2" … 12") |
Full-bore sensor: DN 25 … 2 000 (1" … 78") |
|
|
Full-bore sensor: DN 350 … 1200 (14" … 48") |
||
|
Measuring principle |
Electromagnetic induction |
Electromagnetic induction |
|
Excitation frequency (power supply: 50/60 Hz) |
DN 15 … 65 (½" … 2½"):12.5 Hz/15 Hz |
DN 25 … 65 (1" … 2½"):12.5 Hz/15 Hz |
|
DN 80 … 150 (3" … 6"):6.25 Hz/7.5 Hz |
DN 80 … 150 (3" … 6"):6.25 Hz/7.5 Hz |
|
|
DN 200 … 300 (8" … 12"):3.125 Hz/3.75 Hz |
DN 200 … 1200 (8" … 48"):3.125 Hz/3.75 Hz |
|
|
DN 350 … 1200 (14" … 48"):1.5625 Hz/1.875 Hz |
DN 1400 … 2000 (54" … 78"):1.5625 Hz/1.875 Hz |
|
|
Process connection |
||
|
Flange1) |
||
|
PN 10 (145 psi):DN 200 … 300 (8" … 12") flat face |
Raised face3) (EN 1092-1, DIN 2501 and BS 4504 have the same mating dimensions) |
|
PN 10 (145 psi):DN 350 … 1200 (14" … 48") raised face2) |
PN 6 (87 psi)DN 1400 … 2000 (54" … 78") |
|
|
PN 16 (232 psi):DN 50 … 300 (2" … 12") flat face3) |
PN 10 (145 psi):DN 200 … 2000 (8" … 78") |
|
|
PN 16 (232 psi):DN 350 … 1200 (14" … 48") raised face |
PN 16 (232 psi):DN 65 … 600 (2½" … 24") |
|
|
PN 40 (580 psi):DN 15 ... 40 (½" … 1½") flat face |
PN 40 (580 psi):DN 25 … 50 (1" … 2") |
|
|
Class 150: ½" ... 12" flat face; |
Class 150: 1" to 24"; raised face |
|
Class D:28" … 48", flat face |
Class D:28" … 78", flat face |
|
PN 16 (232 psi): |
PN 16 (232 psi): |
|
- |
K10 (1" … 24") |
|
Rated operating conditions |
||
|
Ambient temperature |
||
|
-40 … +70 °C (-40 … +158 °F) |
-20 … +70 °C (-4 … +158 °F) |
|
-20 … +60 °C (-4 … +140 °F) |
-20 … +60 °C (-4 … +140 °F) |
|
Operating pressure (Abs) |
DN 15 … 40 (½" … 1½"): |
DN 25 … 50 (1" … 2"): |
|
DN 50 … 300 (2" … 12"): |
DN 65 … 1200 (2½" … 48"): |
|
|
DN 350 … 1200 (14" … 48"): |
DN 1400 … 2000 (54" … 78"): |
|
|
Enclosure pressure rating |
||
|
IP67 in accordance with EN 60529/NEMA 4X/6 (1 mH2O, 30 min) |
IP67 in accordance with EN 60529/NEMA 4X/6 (1 mH2O, 30 min) |
|
IP68 in accordance with EN 60529 / NEMA 6P (10 mH2O continuous) |
IP68 in accordance with EN 60529 / NEMA 6P (10 mH2O continuous) |
|
Pressure drop |
DN 15 and 25: (½" and 1"): max. 20 mbar, (0.29 psi) at 1 m/s (3 ft/s) |
Not significant |
|
DN 40 … 300 (1½" … 12"): max. 25 mbar (0.36 psi), at 3 m/s (10 ft/s) |
||
|
DN 350 … 1200 (14" … 48"): not significant |
||
|
Pressure test |
1.5 times rated pressure FM fire protection: 2 x PN |
1.5 times rated pressure |
|
Mechanical load (vibration) |
18 – 1000 Hz random, x, y, z directions, 2 hours, in accordance with EN 60068-2-36 |
18 – 1000 Hz random, x, y, z directions, 2 hours, in accordance with EN 60068-2-36 |
|
Sensor: 3.17 g RMS |
Sensor: 3.17 g RMS |
|
|
Sensor with compact MAG 5000/6000 transmitter: 3.17 g RMS |
Sensor with compact MAG 5000/6000 transmitter: 3.17 g RMS |
|
|
Sensor with compact MAG 6000 I transmitter: 1.14 g RMS |
Sensor with compact MAG 6000 I transmitter: 1.14 g RMS |
|
|
Medium conditions |
||
|
Medium temperature |
||
|
-10 … +70 °C (14 … 158 °F) |
- |
|
-10 … +70 °C (14 … 158 °F) |
- |
|
0.1 … 30 °C (32 … 76 °F) |
- |
|
- |
-10 … +70 °C (14 … 158 °F) |
|
EMC |
2014/30/EU |
2014/30/EU |
|
Design |
||
|
Material |
||
|
Carbon steel ASTM A 105 with anti-corrosion coating |
Carbon steel ASTM A 105 with anti-corrosion coating |
|
Hastelloy C276 |
Hastelloy C276 |
|
Hastelloy C276 |
Hastelloy C276 |
|
Glass fiber reinforced polyamide |
Glass fiber reinforced polyamide |
|
Certifications and approvals |
||
|
Calibration |
||
|
Zero point, 2 x 25 % and 2 x 90 % |
Zero point, 2 x 25 % and 2 x 90 % |
|
5-point calibration: 20 %, 40 %, 60 %, 80 % and 100 % of factory Qmax 10-point calibration: ascending or descending at 20 %, 40 %, 60 %, 80 % and 100 % of factory Qmax Pairing calibration: default, 5-point or 10-point |
5-point calibration: 20 %, 40 %, 60 %, 80 % and 100 % of factory Qmax 10-point calibration: ascending or descending at 20 %, 40 %, 50 %, 80 % and 100 % of factory Qmaxmax Pairing calibration: default, 5-point or 10-point |
|
Custody transfer type |
|
- |
|
Drinking water |
EPDM liner:
|
|
|
Marine7) |
|
|
|
Hazardous area7) |
||
|
Standard sensor with/without MAG 5000/6000/6000 I |
|
|
|
Pressure equipment |
|
|
|
Other |
|
|
1) DN 750, DN 1050 and DN 1100 (30", 42" and 44") are not available for EN 1092-1 (PN 10 and PN 16) and AS4087 flanges
2) Type 01 (SORF)
3) DN ≤ 600 Type 01 (SORF); DN > 600 Type 11 (WNRF)
4) Compact transmitter MAG 5000 CT/6000 CT -20 ... +50 °C (-4 ... 122 °F)
5) Submit a product change request for verification
6) Including Annex G
7) In remote version with sensor sizes DN 50 ... DN 300 (2" ... 12")
8) For PN 16 flowmeters with sizes larger than 600 mm (24"), PED certification is available at an additional charge. The basic unit is only provided with LVD (Low Voltage Directive) certification and EMC certification. The directive does not cover all products sold outside the member states of the EU and the European Free Trade Association, nor products sold to certain market segments. This includes:
a) Meters used in water supply, distribution and drainage networks.
b) Meters used in any fluid transport pipeline from offshore to onshore.
c) Meters used for oil or gas extraction (including Christmas tree and manifold equipment).
d) Any meter installed on board a ship or mobile offshore platform. For detailed information on the PED and related requirements, see Page 9/6.
9) Not applicable to sensors with 300 μm coating.
MAG 5100 W (7ME6520) with MAG 6000 CT (billing program) MI-001
MAG 5100 W CT is type-approved in accordance with the international water meter standard OIML R 49. On November 1, 2006, the MI-001 water meter directive came into force, which means that if a water meter bears the MI-001 marking, it can be sold throughout the EU.
MAG 5100 W MI-001 is a product verified and marked in accordance with Class II certification under Directive 2014/32/EU of the European Parliament and of the Council of February 26, 2014 (Annex III water meters MI-001, concerning measuring instruments (MID) with nominal sizes from DN 50 to DN 1200) (Order No.: 7ME6520).
According to the above directive, MID certification can be regarded as a combination of Module B and Module D certification.
Module B: Type approval in accordance with OIML R 49
Module D: Product quality assurance certification
MAG 5100 W (7ME6520) with MAG 5000/MAG 6000 or MAG 6000 CT, for fire-fighting applications
MAG 5100 W (7ME6520) is FM fire-approved and suitable for automatic fire protection systems. This certification applies to DN 50, DN 80, DN 100, DN 150, DN 200, DN 250 and DN 300 (2", 3", 4", 6", 8", 10" and 12"), with flange rating ANSI B16.5 Class 150. Products with FM fire approval can be ordered via Z-options P20, P21 and P22.
MAG 5100 W (7ME6520) MI-001 is a product verified and marked with the supplied Q3 as well as Q3/Q4 = 1.25 and Q2/Q1 = 1.6; the measuring ranges are shown in the table below:
|
Order code: P11 |
DN 50 (2”) |
DN 65 (2½”) |
DN 80 (3”) |
DN 100 (4”) |
DN 125 (5”) |
DN 150 (6”) |
DN 200 (8”) |
DN 250 (10”) |
DN 300 (12”) |
|---|---|---|---|---|---|---|---|---|---|
|
“R” Q3/Q1 |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
|
Q4 [m³/h] |
20 |
31.25 |
50 |
78.75 |
125 |
200 |
312.5 |
500 |
787.5 |
|
Q3 [m³/h] |
16 |
25 |
40 |
63 |
100 |
160 |
250 |
400 |
630 |
|
Q2 [m³/h] |
0.64 |
1.0 |
1.6 |
2.52 |
4.0 |
6.4 |
10.0 |
16.0 |
25.2 |
|
Q1 [m³/h] |
0.4 |
0.63 |
1.0 |
1.58 |
2.5 |
4.0 |
6.25 |
10.0 |
15.75 |
|
Order code: P12 |
DN 50 (2”) |
DN 65 (2½”) |
DN 80 (3”) |
DN 100 (4”) |
DN 125 (5”) |
DN 150 (6”) |
DN 200 (8”) |
DN 250 (10”) |
DN 300 (12”) |
|---|---|---|---|---|---|---|---|---|---|
|
“R” Q3/Q1 |
63 |
63 |
63 |
63 |
63 |
63 |
63 |
63 |
63 |
|
Q4 [m³/h] |
20 |
31.25 |
50 |
78.75 |
125 |
200 |
312.5 |
500 |
787.5 |
|
Q3 [m³/h] |
16 |
25 |
40 |
63 |
100 |
160 |
250 |
400 |
630 |
|
Q2 [m³/h] |
0.41 |
0.63 |
1.02 |
1.6 |
2.5 |
4.1 |
6.3 |
10.2 |
16.0 |
|
Q1 [m³/h] |
0.25 |
0.40 |
0.63 |
1.00 |
1.59 |
2.54 |
3.97 |
6.35 |
10.0 |
|
Order code: P13 |
DN 50 (2”) |
DN 65 (2½”) |
DN 80 (3”) |
DN 100 (4”) |
DN 125 (5”) |
DN 150 (6”) |
DN 200 (8”) |
DN 250 (10”) |
DN 300 (12”) |
|---|---|---|---|---|---|---|---|---|---|
|
“R” Q3/Q1 |
80 |
80 |
80 |
80 |
80 |
80 |
80 |
80 |
80 |
|
Q4 [m³/h] |
20 |
31.3 |
50 |
78.75 |
125 |
200 |
312.5 |
500 |
787.5 |
|
Q3 [m³/h] |
16 |
25 |
40 |
63 |
100 |
160 |
250 |
400 |
630 |
|
Q2 [m³/h] |
0.32 |
0.5 |
0.8 |
1.26 |
2.0 |
3.2 |
5.0 |
8.0 |
12,6 |
|
Q1 [m³/h] |
0.20 |
0.31 |
0.50 |
0.79 |
1.25 |
2.00 |
3.13 |
5.00 |
7.9 |
|
Order code: P16 |
DN 50 (2”) |
DN 65 (2½”) |
DN 80 (3”) |
DN 100 (4”) |
DN 125 (5”) |
DN 150 (6”) |
DN 200 (8”) |
DN 250 (10”) |
DN 300 (12”) |
|---|---|---|---|---|---|---|---|---|---|
|
“R” Q3/Q1 |
160 |
160 |
160 |
160 |
160 |
160 |
160 |
160 |
160 |
|
Q4 [m³/h] |
50 |
78.5 |
125 |
200 |
312.5 |
500 |
787.5 |
1250 |
2000 |
|
Q3 [m³/h] |
40 |
63 |
100 |
160 |
250 |
400 |
630 |
1000 |
1600 |
|
Q2 [m³/h] |
0.4 |
0.63 |
1.0 |
1.6 |
2.5 |
4.0 |
6.3 |
10.0 |
16.0 |
|
Q1 [m³/h] |
0.25 |
0.39 |
0.63 |
1.0 |
1.56 |
2.5 |
3.94 |
6.3 |
10.0 |
|
Order code: P17 |
DN 50 (2”) |
DN 65 (2½”) |
DN 80 (3”) |
DN 100 (4”) |
DN 125 (5”) |
DN 150 (6”) |
DN 200 (8”) |
DN 250 (10”) |
DN 300 (12”) |
|---|---|---|---|---|---|---|---|---|---|
|
“R” Q3/Q1 |
200 |
200 |
200 |
200 |
200 |
200 |
200 |
200 |
200 |
|
Q4 [m³/h] |
50 |
78.5 |
125 |
200 |
312.5 |
500 |
787.5 |
1250 |
2000 |
|
Q3 [m³/h] |
40 |
63 |
100 |
160 |
250 |
400 |
630 |
1000 |
1600 |
|
Q2 [m³/h] |
0.32 |
0.50 |
0.80 |
1.28 |
2.0 |
3.2 |
5.0 |
8.0 |
12.8 |
|
Q1 [m³/h] |
0.2 |
0.32 |
0.50 |
0.8 |
1.25 |
2.0 |
3.15 |
5.0 |
8.0 |
|
Order code: P18 |
DN 50 (2”) |
DN 65 (2½”) |
DN 80 (3”) |
DN 100 (4”) |
DN 125 (5”) |
DN 150 (6”) |
DN 200 (8”) |
DN 250 (10”) |
DN 300 (12”) |
|---|---|---|---|---|---|---|---|---|---|
|
“R” Q3/Q1 |
250 |
250 |
250 |
250 |
250 |
250 |
250 |
250 |
250 |
|
Q4 [m³/h] |
50 |
78.5 |
125 |
200 |
312.5 |
500 |
787.5 |
1250 |
2000 |
|
Q3 [m³/h] |
40 |
63 |
100 |
160 |
250 |
400 |
630 |
1000 |
1600 |
|
Q2 [m³/h] |
0.26 |
0.4 |
0.64 |
1.02 |
1.6 |
2.56 |
4.0 |
6.4 |
10.24 |
|
Q1 [m³/h] |
0.16 |
0.25 |
0.4 |
0.64 |
1.0 |
1.6 |
2.52 |
4.0 |
6.4 |
|
Order code: |
DN 350 (14") |
DN 400 (16“) |
DN 450 (18“) |
DN 500 (20“) |
DN 600 (24“) |
|---|---|---|---|---|---|
|
“R” Q3/Q1 |
40 |
40 |
40 |
40 |
40 |
|
Q4 [m³/h] |
1250 |
1250 |
2000 |
2000 |
3125 |
|
Q3 [m³/h] |
1000 |
1000 |
1600 |
1600 |
2500 |
|
Q2 [m³/h] |
40.0 |
40.0 |
64.0 |
64.0 |
100.0 |
|
Q1 [m³/h] |
25.0 |
25.0 |
40.0 |
40.0 |
62.5 |
|
Order code: |
DN 350 (14") |
DN 400 (16“) |
DN 450 (18“) |
DN 500 (20“) |
DN 600 (24“) |
|---|---|---|---|---|---|
|
“R” Q3/Q1 |
63 |
63 |
63 |
63 |
63 |
|
Q4 [m³/h] |
1250 |
2000 |
3125 |
3125 |
5000 |
|
Q3 [m³/h] |
1000 |
1600 |
2500 |
2500 |
4000 |
|
Q2 [m³/h] |
25.4 |
40.63 |
63.49 |
63.49 |
101.6 |
|
Q1 [m³/h] |
15.9 |
25.4 |
39.7 |
39.7 |
63.49 |
|
Order code: |
DN 350 (14") |
DN 400 (16“) |
DN 450 (18“) |
DN 500 (20“) |
DN 600 (24“) |
|---|---|---|---|---|---|
|
“R” Q3/Q1 |
80 |
80 |
80 |
80 |
80 |
|
Q4 [m³/h] |
2000 |
3125 |
5000 |
5000 |
7875 |
|
Q3 [m³/h] |
1600 |
2500 |
4000 |
4000 |
6300 |
|
Q2 [m³/h] |
32.0 |
50.0 |
80.0 |
80.0 |
126.0 |
|
Q1 [m³/h] |
20.0 |
31.25 |
50.0 |
50.0 |
78.75 |
|
Order code: |
DN 350 (14") |
DN 400 (16“) |
DN 450 (18“) |
DN 500 (20“) |
DN 600 (24“) |
|---|---|---|---|---|---|
|
“R” Q3/Q1 |
100 |
100 |
100 |
100 |
100 |
|
Q4 [m³/h] |
3125 |
3125 |
5000 |
5000 |
7875 |
|
Q3 [m³/h] |
2500 |
2500 |
4000 |
4000 |
6300 |
|
Q2 [m³/h] |
40.0 |
2540.0 |
64.0 |
64.0 |
100.8 |
|
Q1 [m³/h] |
25.0 |
25.0 |
40.0 |
40.0 |
63.0 |
|
Order code: |
DN 700 (28“) |
DN 750 (30“) |
DN 800 (32“) |
DN 900 (36“) |
DN 1000 (40“) |
DN 1200 (48“) |
|---|---|---|---|---|---|---|
|
“R” Q3/Q1 |
40 |
40 |
40 |
40 |
40 |
40 |
|
Q4 [m³/h] |
5000 |
5000 |
5000 |
7875 |
7875 |
7875 |
|
Q3 [m³/h] |
4000 |
4000 |
4000 |
6300 |
6300 |
6300 |
|
Q2 [m³/h] |
160.0 |
160.0 |
160.0 |
252.0 |
252.0 |
252.0 |
|
Q1 [m³/h] |
100.0 |
100.0 |
100.0 |
157.5 |
157.5 |
157.5 |
|
Order code: |
DN 700 (28“) |
DN 750 (30“) |
DN 800 (32“) |
DN 900 (36“) |
DN 1000 (40“) |
DN 1200 (48“) |
|---|---|---|---|---|---|---|
|
“R” Q3/Q1 |
63 |
63 |
63 |
63 |
63 |
- |
|
Q4 [m³/h] |
5000 |
5000 |
5000 |
7875 |
7875 |
- |
|
Q3 [m³/h] |
4000 |
4000 |
4000 |
6300 |
6300 |
- |
|
Q2 [m³/h] |
101.6 |
101.6 |
101.6 |
160.0 |
160.0 |
- |
|
Q1 [m³/h] |
63.5 |
63.5 |
63.5 |
100.0 |
100.0 |
- |
|
Order code: |
DN 700 (28“) |
DN 750 (30“) |
DN 800 (32“) |
DN 900 (36“) |
DN 1000 (40“) |
DN 1200 (48“) |
|---|---|---|---|---|---|---|
|
“R” Q3/Q1 |
80 |
80 |
80 |
80 |
80 |
- |
|
Q4 [m³/h] |
5000 |
5000 |
5000 |
7875 |
7875 |
- |
|
Q3 [m³/h] |
4000 |
4000 |
4000 |
6300 |
6300 |
- |
|
Q2 [m³/h] |
80.0 |
80.0 |
80.0 |
126.0 |
126.0 |
- |
|
Q1 [m³/h] |
50.0 |
50.0 |
50.0 |
78.75 |
78.75 |
- |
The tags are located on the transmitter housing. An example of the product tag is shown below:
OIML R 49/MI-001 certification applies to:
- DN 50 - 1200 mm (2” - 48”)
- Horizontal and vertical installation
- Compact or remote version, with cable up to 500 m
- Supply voltage 115 to 230 V AC, 12 to 24 V AC/DC
- Optional with or without communication module
Other restrictions may also apply (see certificate)
Special OIML / MI-001 settings:
- Unit: m³
- Qmax: Q3
- Low flow cut off 0.1 %
- Digital output: frequency
For other factory settings, see the operating manual.
Dimensional drawing
|
7ME6520 NBR or EPDM liner |
7ME6580 Ebonite liner |
||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal size |
A |
D1 |
A |
D1 |
L1) |
||||||
|
[mm] |
[inch] |
[mm] |
[inch] |
[mm] |
[inch] |
[mm] |
[inch] |
[mm] |
[inch] |
[mm] |
[inch] |
|
15 |
½ |
177 |
7.0 |
77 |
3.0 |
- |
- |
- |
- |
200 |
7.9 |
|
25 |
1 |
187 |
7.4 |
96 |
3.8 |
187 |
7.4 |
104 |
4.09 |
200 |
7.9 |
|
40 |
1½ |
202 |
8.0 |
127 |
5.0 |
197 |
7.8 |
124 |
4.88 |
200 |
7.9 |
|
50 |
2 |
188 |
7.4 |
76 |
3.0 |
205 |
8.1 |
139 |
5.47 |
200 |
7.9 |
|
65 |
2½ |
194 |
7.6 |
89 |
3.5 |
212 |
8.3 |
154 |
6.06 |
200 |
7.9 |
|
80 |
3 |
200 |
7.9 |
102 |
4.0 |
222 |
8.7 |
174 |
6.85 |
200 |
7.9 |
|
100 |
4 |
207 |
8.1 |
114 |
4.5 |
242 |
9.5 |
214 |
8.43 |
250 |
9.8 |
|
125 |
5 |
217 |
8.5 |
140 |
5.5 |
255 |
10.0 |
239 |
9.41 |
250 |
9.8 |
|
150 |
6 |
232 |
9.1 |
168 |
6.6 |
276 |
10.9 |
282 |
11.1 |
300 |
11.8 |
|
200 |
8 |
257 |
10.1 |
219 |
8.6 |
304 |
12.0 |
338 |
13.31 |
350 |
13.8 |
|
250 |
10 |
284 |
11.2 |
273 |
10.8 |
332 |
13.1 |
393 |
15.47 |
450 |
17.7 |
|
300 |
12 |
310 |
12.2 |
324 |
12.8 |
357 |
14.1 |
444 |
17.48 |
500 |
19.7 |
|
350 |
14 |
382 |
15.0 |
451 |
17.8 |
362 |
14.3 |
451 |
17.76 |
550 |
21.7 |
|
400 |
16 |
407 |
16.0 |
502 |
19.8 |
387 |
15.2 |
502 |
19.76 |
600 |
23.6 |
|
450 |
18 |
438 |
17.2 |
563 |
22.2 |
418 |
16.5 |
563 |
22.16 |
600 |
23.6 |
|
500 |
20 |
463 |
18.2 |
614 |
24.2 |
443 |
17.4 |
614 |
24.17 |
600 |
23.6 |
|
600 |
24 |
514 |
20.2 |
715 |
28.2 |
494 |
19.4 |
715 |
28.15 |
600 |
23.6 |
|
700 |
28 |
564 |
22.2 |
816 |
32.1 |
544 |
21.4 |
816 |
32.13 |
700 |
27.6 |
|
750 |
30 |
591 |
23.3 |
869 |
34.2 |
571 |
22.5 |
869 |
34.21 |
750 |
29.5 |
|
800 |
32 |
616 |
24.3 |
927 |
36.5 |
606 |
23.9 |
927 |
36.5 |
800 |
31.5 |
|
900 |
36 |
663 |
26.1 |
1032 |
40.6 |
653 |
25.7 |
1032 |
40.63 |
900 |
35.4 |
|
1000 |
40 |
714 |
28.1 |
1136 |
44.7 |
704 |
27.7 |
1136 |
44.72 |
1000 |
39.4 |
|
42 |
714 |
28.1 |
1136 |
44.7 |
704 |
27.7 |
1136 |
44.72 |
1000 |
39.4 |
|
|
44 |
765 |
30.1 |
1238 |
48.7 |
755 |
29.7 |
1238 |
48.74 |
1100 |
43.3 |
|
|
1200 |
48 |
820 |
32.3 |
1348 |
53.1 |
810 |
31.9 |
1348 |
53.07 |
1200 |
47.2 |
|
1400 |
54 |
- |
- |
- |
- |
925 |
36.4 |
1574 |
65.94 |
1400 |
55.1 |
|
1500 |
60 |
- |
- |
- |
- |
972 |
38.2 |
1672 |
65.83 |
1500 |
59.1 |
|
1600 |
66 |
- |
- |
- |
- |
1025 |
40.4 |
1774 |
75.39 |
1600 |
63.0 |
|
1800 |
72 |
- |
- |
- |
- |
1123 |
44.2 |
1974 |
77.72 |
1800 |
70.9 |
|
2000 |
78 |
- |
- |
- |
- |
1223 |
48.1 |
2174 |
85.59 |
2000 |
78.7 |
1) Tolerance for fixed lengths:
DN 15 to DN 200 (½" to 8"): +0/-3 mm (+0/-0.12") DN 250 to DN 400 (10" to 16"): +0/-5 mm (+0/-0.20")
DN 450 to DN 600 (18" to 24"): +5/-5 mm (+0.20/-0.20") DN 700 to DN 2000 (28" to 78"): +10/-10 mm (+0.39/-0.39")
MAG 5100 W/6000 I compact version
|
7ME6520 NBR or EPDM liner |
7ME6580 Ebonite liner |
||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal size |
A |
A1 |
D1 |
A |
A1 |
D1 |
L1) |
||||||||
|
[mm] |
[inch] |
[mm] |
[inch] |
[mm] |
[inch] |
[mm] |
[inch] |
[mm] |
[inch] |
[mm] |
[inch] |
[mm] |
[inch] |
[mm] |
[inch] |
|
15 |
½ |
177 |
7.0 |
331 |
13.0 |
77 |
3.0 |
187 |
7.4 |
- |
- |
- |
- |
200 |
7.9 |
|
25 |
1 |
187 |
7.4 |
341 |
13.4 |
96 |
3.8 |
187 |
7.4 |
341 |
13.4 |
104 |
4.09 |
200 |
7.9 |
|
40 |
1½ |
202 |
8.0 |
356 |
14.0 |
127 |
5.0 |
197 |
7.8 |
351 |
13.8 |
124 |
4.88 |
200 |
7.9 |
|
50 |
2 |
188 |
7.4 |
342 |
13.5 |
76 |
3.0 |
205 |
8.1 |
359 |
14.1 |
139 |
5.47 |
200 |
7.9 |
|
65 |
2½ |
194 |
7.6 |
348 |
13.7 |
89 |
3.5 |
212 |
8.3 |
366 |
14.4 |
154 |
6.06 |
200 |
7.9 |
|
80 |
3 |
200 |
7.9 |
354 |
14.0 |
102 |
4.0 |
222 |
8.7 |
376 |
14.8 |
174 |
6.85 |
200 |
7.9 |
|
100 |
4 |
207 |
8.1 |
361 |
14.2 |
114 |
4.5 |
242 |
9.5 |
396 |
15.6 |
214 |
8.43 |
250 |
9.8 |
|
125 |
5 |
217 |
8.5 |
371 |
14.6 |
140 |
5.5 |
255 |
10.0 |
409 |
16.1 |
239 |
9.41 |
250 |
9.8 |
|
150 |
6 |
232 |
9.1 |
386 |
15.2 |
168 |
6.6 |
276 |
10.9 |
430 |
16.9 |
282 |
11.1 |
300 |
11.8 |
|
200 |
8 |
257 |
10.1 |
411 |
16.2 |
219 |
8.6 |
304 |
12.0 |
458 |
18.0 |
338 |
13.31 |
350 |
13.8 |
|
250 |
10 |
284 |
11.2 |
438 |
17.2 |
273 |
10.8 |
332 |
13.1 |
486 |
19.1 |
393 |
15.47 |
450 |
17.7 |
|
300 |
12 |
310 |
12.2 |
464 |
18.3 |
324 |
12.8 |
357 |
14.1 |
511 |
20.1 |
444 |
17.48 |
500 |
19.7 |
|
350 |
14 |
382 |
15.0 |
536 |
21.1 |
451 |
17.8 |
362 |
14.3 |
516 |
20.3 |
451 |
17.76 |
550 |
21.7 |
|
400 |
16 |
407 |
16.0 |
561 |
22.1 |
502 |
19.8 |
387 |
15.2 |
541 |
21.3 |
502 |
19.76 |
600 |
23.6 |
|
450 |
18 |
438 |
17.2 |
592 |
23.3 |
563 |
22.2 |
418 |
16.5 |
572 |
22.5 |
563 |
22.16 |
600 |
23.6 |
|
500 |
20 |
463 |
18.2 |
617 |
24.3 |
614 |
24.2 |
443 |
17.4 |
597 |
23.5 |
614 |
24.17 |
600 |
23.6 |
|
600 |
24 |
514 |
20.2 |
668 |
26.3 |
715 |
28.2 |
494 |
19.4 |
648 |
25.5 |
715 |
28.15 |
600 |
23.6 |
|
700 |
28 |
564 |
22.2 |
718 |
28.3 |
816 |
32.1 |
544 |
21.4 |
698 |
27.5 |
816 |
32.13 |
700 |
27.6 |
|
750 |
30 |
591 |
23.3 |
745 |
29.3 |
869 |
34.2 |
571 |
22.5 |
725 |
28.5 |
869 |
34.21 |
750 |
29.5 |
|
800 |
32 |
616 |
24.3 |
770 |
30.3 |
927 |
36.5 |
606 |
23.9 |
760 |
29.9 |
927 |
36.5 |
800 |
31.5 |
|
900 |
36 |
663 |
26.1 |
817 |
32.2 |
1032 |
40.6 |
653 |
25.7 |
807 |
31,8 |
1032 |
40.63 |
900 |
35.4 |
|
1000 |
40 |
714 |
28.1 |
868 |
34.2 |
1136 |
44.7 |
704 |
27.7 |
858 |
33.8 |
1136 |
44.72 |
1000 |
39.4 |
|
42 |
714 |
28.1 |
868 |
34.2 |
1136 |
44.7 |
704 |
27.7 |
858 |
33.8 |
1136 |
44.72 |
1000 |
39.4 |
|
|
44 |
765 |
30.1 |
919 |
36.2 |
1238 |
48.7 |
755 |
29.7 |
904 |
35.6 |
1238 |
48.74 |
1100 |
43.3 |
|
|
1200 |
48 |
820 |
32.3 |
974 |
38.3 |
1348 |
53.1 |
810 |
31.9 |
964 |
38.0 |
1348 |
53.07 |
1200 |
47.2 |
|
1400 |
54 |
- |
- |
- |
- |
- |
- |
925 |
36.4 |
1079 |
42.5 |
1574 |
61.97 |
1400 |
55.1 |
|
1500 |
60 |
- |
- |
- |
- |
- |
- |
972 |
38.2 |
1126 |
44.3 |
1672 |
65.83 |
1500 |
59.1 |
|
1600 |
66 |
- |
- |
- |
- |
- |
- |
1025 |
40.4 |
1179 |
46.4 |
1774 |
59.84 |
1600 |
63.0 |
|
1800 |
72 |
- |
- |
- |
- |
- |
- |
1123 |
44.2 |
1277 |
50.3 |
1974 |
77.72 |
1800 |
70.9 |
|
2000 |
78 |
- |
- |
- |
- |
- |
- |
1223 |
48.1 |
1377 |
54.2 |
2174 |
85.59 |
2000 |
78.7 |
1) Tolerance for fixed lengths:
DN 15 to DN 200 (½" to 8"): +0/-3 mm (+0/-0.12") DN 250 to DN 400 (10" to 16"): +0/-5 mm (+0/-0.20")
DN 450 to DN 600 (18" to 24"): +5/-5 mm (+0.20/-0.20") DN 700 to DN 2000 (28" to 78"): +10/-10 mm (+0.39/-0.39")
|
7ME6520 |
7ME6580 |
||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
Nominal size |
PN 10 |
PN 16 |
PN 40 |
Class 150/AWWA |
AS |
PN 16 |
|||||||
|
[mm] |
[inch] |
[kg] |
[ibs] |
[kg] |
[ibs] |
[kg] |
[ibs] |
[kg] |
[ibs] |
[kg] |
[ibs] |
[kg] |
[lbs] |
|
15 |
½ |
- |
- |
- |
- |
4 |
9 |
4 |
9 |
4 |
9 |
5 |
11 |
|
25 |
1 |
- |
- |
- |
- |
6 |
12 |
5 |
11 |
4 |
9 |
5 |
11 |
|
40 |
1½ |
- |
- |
- |
- |
8 |
18 |
7 |
15 |
7 |
15 |
8 |
17 |
|
50 |
2 |
- |
- |
9 |
20 |
- |
- |
8 |
20 |
9 |
20 |
9 |
20 |
|
65 |
2½ |
- |
- |
10.7 |
24 |
- |
- |
11 |
24 |
10.7 |
24 |
11 |
24 |
|
80 |
3 |
- |
- |
11.6 |
26 |
- |
- |
13 |
28 |
11.6 |
26 |
12 |
26 |
|
100 |
4 |
- |
- |
15.2 |
33 |
- |
- |
19 |
41 |
15.2 |
33 |
16 |
35 |
|
125 |
5 |
- |
- |
20.4 |
45 |
- |
- |
24 |
52 |
- |
- |
19 |
42 |
|
150 |
6 |
- |
- |
26 |
57 |
- |
- |
29 |
64 |
26 |
57 |
27 |
60 |
|
200 |
8 |
48 |
106 |
48 |
106 |
- |
- |
56 |
124 |
48 |
106 |
40 |
88 |
|
250 |
10 |
64 |
141 |
69 |
152 |
- |
- |
79 |
174 |
69 |
152 |
60 |
132 |
|
300 |
12 |
76 |
167 |
86 |
189 |
- |
- |
110 |
243 |
86 |
189 |
80 |
176 |
|
350 |
14 |
104 |
229 |
125 |
274 |
- |
- |
139 |
307 |
115 |
254 |
110 |
242 |
|
400 |
16 |
119 |
263 |
143 |
314 |
- |
- |
159 |
351 |
125 |
277 |
125 |
275 |
|
450 |
18 |
136 |
299 |
173 |
381 |
- |
- |
182 |
400 |
141 |
311 |
175 |
385 |
|
500 |
20 |
163 |
359 |
223 |
491 |
- |
- |
225 |
495 |
189 |
418 |
200 |
440 |
|
600 |
24 |
236 |
519 |
338 |
744 |
- |
- |
320 |
704 |
301 |
664 |
287 |
633 |
|
700 |
28 |
270 |
595 |
314 |
692 |
- |
- |
273 |
602 |
320 |
704 |
330 |
728 |
|
750 |
30 |
- |
- |
- |
- |
- |
- |
329 |
725 |
- |
- |
360 |
794 |
|
800 |
32 |
346 |
763 |
396 |
873 |
- |
- |
365 |
804 |
428 |
944 |
450 |
992 |
|
900 |
36 |
432 |
951 |
474 |
1043 |
- |
- |
495 |
1089 |
619 |
1362 |
530 |
1168 |
|
1000 |
40 |
513 |
1130 |
600 |
1321 |
- |
- |
583 |
1282 |
636 |
1399 |
660 |
1455 |
|
42 |
- |
- |
- |
- |
- |
- |
687 |
1512 |
- |
- |
- |
- |
|
|
44 |
- |
- |
- |
- |
- |
- |
763 |
1680 |
- |
- |
1140 |
2513 |
|
|
1200 |
48 |
643 |
1415 |
885 |
1948 |
- |
- |
861 |
1896 |
813 |
1789 |
1180 |
2601 |
|
1400 |
54 |
1592 |
3510 |
- |
- |
- |
- |
- |
- |
- |
- |
1600 |
3528 |
|
1500 |
60 |
- |
- |
- |
- |
- |
- |
- |
- |
- |
- |
2460 |
5423 |
|
1600 |
66 |
2110 |
4652 |
- |
- |
- |
- |
- |
- |
- |
- |
2525 |
5566 |
|
1800 |
72 |
2560 |
5644 |
- |
- |
- |
- |
- |
- |
- |
- |
2930 |
6460 |
|
2000 |
78 |
3640 |
8025 |
- |
- |
- |
- |
- |
- |
- |
- |
3665 |
8080 |
After installing the MAG 5000 and MAG 6000 compact transmitters, the weight increases by approximately 0.8 kg (1.8 lbs); after installing the MAG 6000 I transmitter, the weight increases by approximately 5.5 kg (12.1 lb).
Source: Siemens website public information
Кейсы
Городские сточные воды — Электромагнитный расходомер: пример внедрения
Ситуация на объекте
Клиент работает в отрасли «Городские сточные воды», производство расположено на входную, биологическую и выходную стадии городских очистных. Главная задача — объёмный расход электропроводящих жидкостей.
В чём сложность
Сложность в том, что высокое содержание взвесей и коррозионных компонентов, большие суточные колебания расхода; кроме того, показатели стоков колеблются, датчики зарастают илом и биоплёнкой. Поэтому ключевое здесь — подбор пары «футеровка — электроды» по электропроводности, твёрдым частицам и износу.
Что мы сделали
Мы использовали подход «измерение расхода» — решение по расходу под диаметр, среду и диапазон. Основа реализации — подбор пары «футеровка — электроды» по электропроводности, твёрдым частицам и износу; поэтапно проверялось: стабильное соответствие нормам сброса класса 1A и передача данных онлайн.
Результат работы
В эксплуатации система ведёт себя как задумано — нет препятствий потоку: минимальные потери давления и низкое обслуживание, а объём текущего обслуживания заметно снизился.
Пищевая промышленность — Электромагнитный расходомер: пример внедрения
Контекст применения
участки дозирования, пастеризации, розлива и CIP-мойки — типовые условия отрасли «Пищевая промышленность». Проект: Электромагнитный расходомер; главное — объёмный расход электропроводящих жидкостей.
Ограничения процесса
частые мойки требуют приборов, стойких к горячим щелочным циклам CIP/SIP, а условия «сиропы, молочные продукты и напитки, склонные к отложениям, при жёстких санитарных требованиях» только усиливают это. Поэтому конфигурация Электромагнитный расходомер должна включать подбор пары «футеровка — электроды» по электропроводности, твёрдым частицам и износу.
Подход к поставке
Формат поставки — «измерение расхода»: решение по расходу под диаметр, среду и диапазон. В работе главное — подбор пары «футеровка — электроды» по электропроводности, твёрдым частицам и износу, а также требования: требования пищевой безопасности и гигиенического исполнения 3-A / EHEDG.
Результаты на объекте
Эксплуатация наглядно показывает результат — нет препятствий потоку: минимальные потери давления и низкое обслуживание; доверие к точке измерения заметно выросло.
Химия и фармацевтика — Электромагнитный расходомер: пример внедрения
О клиенте
Типовая площадка в отрасли «Химия и фармацевтика» — реакторы, мерные и товарные резервуары. Точка измерения — Электромагнитный расходомер; основной акцент — объёмный расход электропроводящих жидкостей.
Ключевые трудности
Условия: сильно агрессивные среды с растворителями и кристаллизацией, частично во взрывоопасных зонах; вдобавок коррозия и взрывозащита сокращают срок службы приборов и удорожают простои — типовое исполнение здесь долго не выдерживает. Решение опирается на следующее: подбор пары «футеровка — электроды» по электропроводности, твёрдым частицам и износу.
Реализация
Работы шли по каналу «измерение расхода»: решение по расходу под диаметр, среду и диапазон. Техническая основа — подбор пары «футеровка — электроды» по электропроводности, твёрдым частицам и износу; также учтено: сертификация Ex и прослеживаемость данных по GMP.
Выгода клиента
На практике это означает нет препятствий потоку: минимальные потери давления и низкое обслуживание, что снизило нагрузку на ремонтный персонал.
Энергетика — Электромагнитный расходомер: пример внедрения
Предпосылки проекта
Проект охватывает питательная вода котлов, конденсат турбин, системы серо- и азотоочистки. Точка измерения — Электромагнитный расходомер; основная задача — объёмный расход электропроводящих жидкостей.
Условия эксплуатации
Среда и условия эксплуатации: высокие температура и давление, пар и минерализованная вода, а также дрейф при высоких температуре и давлении, крайне дорогие внеплановые остановы. Поэтому Электромагнитный расходомер нельзя подбирать по типовому исполнению — требуется подбор пары «футеровка — электроды» по электропроводности, твёрдым частицам и износу.
Решение
Инженерная команда Ainstru работала по каналу «измерение расхода»: решение по расходу под диаметр, среду и диапазон. Конфигурация включает подбор пары «футеровка — электроды» по электропроводности, твёрдым частицам и износу; учтены требования: соответствие отраслевым нормам и показателям готовности блока.
Результаты
После ввода в эксплуатацию система работает стабильно; практический результат — нет препятствий потоку: минимальные потери давления и низкое обслуживание.
Похожие
Endress+HauserЭлектромагнитный расходомер
Endress+HauserЭлектромагнитный расходомер 10
Endress+HauserЭлектромагнитный расходомер
Endress+HauserЭлектромагнитный расходомер с батарейным питанием
Endress+HauserMAGPHANT
Endress+HauserЭлектромагнитный расходомер
Endress+HauserЭлектромагнитный расходомер
Endress+Hauser