Product family：
Deltabar PMD50
Differential pressure transmitter
Deltabar PMD50；Approval Non-hazardous area；Output 2-wire 4-20mA HART；Display/Operation Color display w/o buttons；Housing/Material Dual compartment; Alu, coated；Electrical Connection Thread NPT1/2, IP6
Order Code：PMD50-AABACJH37LCGSAJB1B
Name：Deltabar PMD50
Configuration
| Code | Name | Order | Specification |
|---|---|---|---|
| 010 | Approval | AA | Non-hazardous area |
| 020 | Output | BA | 2-wire 4-20mA HART |
| 030 | Display; Operation | C | Color display w/o buttons |
| 040 | Housing; Material | J | Dual compartment; Alu, coated |
| 050 | Electrical Connection | H | Thread NPT1/2, IP66/68 NEMA Type 4X/6P |
| 055 | Pressure Type | 3 | Differential |
| 075 | Sensor Range | 7L | 16bar/1.6MPa/240psi |
| 090 | Calibration; Unit | C | Sensor range; kPa/MPa |
| 095 | Installation | G | Vertical impulse line, left side high pressure, with vent |
| 110 | Process Connection | SAJ | NPT1/4-18 IEC61518 UNF7/16-20, 316L |
| 170 | Membrane Material | B | AlloyC276 |
| 180 | Fill Fluid | 1 | Silicone oil |
| 200 | Seal | B | PTFE |
Configuration Explained
This is a differential pressure transmitter with a metallic diaphragm, used to measure differential pressure, level and flow of liquids and gases, 24V power supply, two-wire with 4-20mA HART output, with colour display, coated dual-chamber aluminium housing, rugged and vibration resistant, range 16 bar, NPT1/2 threaded interface, IP66/68 protection, vertical impulse line mounting, high pressure side on the left, with vent, calibrated in kPa/MPa, process connection NPT1/4, 316L, AlloyC276 diaphragm, silicone oil filling, PTFE O-ring, suitable for differential pressure and level measurement of corrosive media.