Product family：
Deltabar S PMD75
Differential pressure transmitter
Deltabar S PMD75；Approval ATEX II 2G Ex db IIC T6 Gb；Output/Operating 4-20mA HART; inside；Housing/Cover Sealing/Cable Entry T14 Alu IP66/67 NEMA6P; FVMQ; M20 gland, T14 = side cover (Ex d > M20 thread
Order Code：PMD75-5CG7DE1DCAU+JTL8
Name：Deltabar S PMD75
Configuration
| Code | Name | Order | Specification |
|---|---|---|---|
| 010 | Approval | 5 | ATEX II 2G Ex db IIC T6 Gb |
| 020 | Output; Operating | C | 4-20mA HART; inside |
| 030 | Housing; Cover Sealing; Cable Entry | G | T14 Alu IP66/67 NEMA6P; FVMQ; M20 gland, T14 = side cover (Ex d > M20 thread) |
| 040 | Nominal Range; Cell Material; PN | 7D | 100mbar/10kPa/1.5psi; 316L; 160bar/ 16MPa/2400psi |
| 050 | Calibration; Unit | E | Customised pressure; see additional spec. |
| 060 | Membrane Material | 1 | 316L |
| 070 | Process Connection | D | NPT1/4-18 IEC61518 UNF7/16-20, 316L incl. 2 valves, 316L |
| 080 | Seal | C | PTFE (PN160bar/16MPa/2400psi) |
| 100 | Additional Option 1 | A | Not selected |
| 110 | Additional Option 2 | U | Mounting bracket, wall/pipe, 316L, heavy duty design |
| 580 | Test, Certificate | JT | *环境温度变送器 -60°C/ -76oF |
| 590 | Additional Approval | L8 | EAC marking |
Configuration Explained
This is a PMD75 differential pressure transmitter, metallic sensor for differential pressure, with ATEX explosion-proof approval, with 4-20mA HART output, internal push buttons for on-site adjustment, aluminium housing with side display, IP66/67, nominal range 100 mbar, body 316L resistant to 160 bar, 316L diaphragm with PTFE seal, NPT¼ connection with vent and drain valves, with 304 wall mounting bracket and EAC marking, suitable for differential pressure in low temperature environments.