Product family：
Deltabar PMD75B
Differential pressure transmitter
Deltabar PMD75B；Approval NEPSI Ex db IIC T6 Gb；Output 2-wire 4-20mA HART；Display/Operation Segment display w/o buttons + Bluetooth；Housing/Material Single compartment; Alu, coated；Electrical Connectio
Order Code：PMD75B-NFBADBH37FCGSAJA1D+VD
Name：Deltabar PMD75B
Configuration
| Code | Name | Order | Specification |
|---|---|---|---|
| 010 | Approval | NF | NEPSI Ex db IIC T6 Gb |
| 020 | Output | BA | 2-wire 4-20mA HART |
| 030 | Display; Operation | D | Segment display w/o buttons + Bluetooth |
| 040 | Housing; Material | B | Single compartment; Alu, coated |
| 050 | Electrical Connection | H | Thread NPT1/2, IP66/68 NEMA Type 4X/6P |
| 055 | Pressure Type | 3 | Differential |
| 075 | Sensor Range | 7F | 500mbar/50kPa/7.5psi |
| 090 | Calibration; Unit | C | Sensor range; kPa/MPa |
| 095 | Installation | G | Vertical impulse line, left side high pressure, with vent |
| 110 | Process Connection | SAJ | NPT1/4-18 IEC61518 UNF7/16-20, 316L |
| 170 | Membrane Material | A | 316L |
| 180 | Fill Fluid | 1 | Silicone oil |
| 200 | Seal | D | FKM |
| 660 | Regional Device Adaption | VD | China |
Configuration Explained
This is a PMD75B differential pressure transmitter, smart type, detects process abnormalities such as blocked impulse lines in good time, with NEPSI flameproof approval, 24V power supply, two-wire with 4-20mA HART output, seven-segment character display with Bluetooth wireless connection, aluminium single chamber housing, IP66/68, differential pressure range 500 mbar, 316L diaphragm with silicone oil, suitable for differential pressure monitoring of pipes in hazardous areas.