Product family：
iTEMP TMT82, Transmitter HART
Temperature transmitterIn Stock (4)
iTEMP TMT82, Transmitter HART；Approval ATEX II1G Ex ia IIC T4/T5/T6；Communication/Output Signal HART; 1x 4-20mA；Electrical Connection Screw terminals, housing for DIN rail mounting 17.5mm；Field Housin
Order Code：TMT82-81F8/1F0
Corresponding ext. order code：TMT82-BAA3CB3A1A1A5+F1Z1
Name：iTEMP TMT82, Transmitter HART
Configuration
| Code | Name | Order | Specification |
|---|---|---|---|
| 010 | Approval | BA | ATEX II1G Ex ia IIC T4/T5/T6 |
| 020 | Communication; Output Signal | A | HART; 1x 4-20mA |
| 030 | Electrical Connection | 3 | Screw terminals, housing for DIN rail mounting 17.5mm |
| 040 | Field Housing | C | W/o |
| 050 | Configuration Universal Input | B3 | Ch1: RTD 3-wire, Ch2: RTD 3-wire |
| 060 | Sensor Type Input 1 | A1 | Pt100, IEC60751 (a=0.00385), -200...+850oC, min. span 10K |
| 070 | Sensor Type Input 2 | A1 | Pt100, IEC60751 (a=0.00385) |
| 080 | Input; Interconnection | A5 | Sensor backup; PV=CH1(or CH2) |
| 550 | Calibration | F1 | Factory calibration certificate 6-points, fixed |
| 895 | Marking | Z1 | Tagging (TAG), metal |
Configuration Explained
This is a TMT82 dual-channel DIN rail temperature transmitter, HART protocol, with ATEX intrinsically safe approval, can be installed in hazardous areas, 1 x 4-20mA HART output, both channels with Pt100 three-wire input as hot backup, if one probe fails the other takes over, selectable output channel, replace the probe without stopping the process, 17.5 mm narrow housing, snaps onto a DIN rail, with 6-point calibration certificate and metal tag plate from the factory, suitable for redundant temperature measurement in safety interlocks.