Technical Data
CompareTemperature transmitters
| Measuring Principle | Head transmitter |
| Input | 2 x RTD, TC, Ohm, mV |
| Output | 1 x analog 4...20 mA / HART |
| Auxiliary power supply | 11...42 V DC (head transmitter) 12...42 V DC (Din rail device) 11/12...30 V DC (Ex ia) |
| Communication | HART-protocol |
| Installation | Terminal head form B, DIN-Rail housing or field mount housing |
| Accuracy | (Pt100, -50...200 °C) <= 0,1 K (Pt100, -58...392 °F) <= 0,18 °F |
| Galvanic isolation | yes |
| Certification | ATEX Ex ia, Ex ic, Ex tb, Ex tc, Ex nA, Ex d ATEX IECEx Ex ia IECEx Ex ia, Ex tb, Ex d CSA C/US General Purpose CSA IS, NI, XP, DIP FM IS,NI, XP, DIP FM+CSA IS, NI INMETRO Ex ia [ia Ga], Ex d, Ex tb NEPSI Ex ia, Ex d, Ex tb, Ex ec EAC Ex ia, Ex d UKCA Ex ia, Ex tb, Ex tc, Ex nA, Ex db KC Ex IND Ex PESO Ex |
This configurable transmitter offers outstanding reliability, accuracy and long-term stability and can be used in critical processes in all industries. It not only transmits converted signals from resistance thermometers (RTD) and thermocouples (TC), but can also transmit resistance and voltage signals using the HART® communication protocol. Sensor monitoring increases the effectiveness of the measuring point. Diagnostic information complies with NAMUR NE 107. Measuring accuracy is optimized by sensor-transmitter matching.
Advantages
International approvals such as FM IS, NI; CSA IS, NI; ATEX, NEPSI, Ex ia, Ex nA permit use in intrinsically safe Zones 1 and 2, ensuring safe operation in hazardous locations. Marine approval
Secure HART® transmission
High-precision measurement based on sensor-transmitter matching
Sensor monitoring and instrument hardware fault detection for reliable operation.
Diagnostic information complies with NAMUR NE107
Various installation methods and sensor connection options available.
Optional spring-loaded terminals for fast wiring without additional tools.
Spare Parts & Accessories 22
22 spare parts · click to collapse
| Order code | Description | |
|---|---|---|
| TA30A- | Terminal box TA30ARetainer for terminal block or head transmitter + optional display. Cover: low, hinged, optional window. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50...150 oC (housing). Protection: IP66/68, NEMA 4X (housing). | Enquire |
| TA30D- | Junction box TA30DRetainer for 2 head transmitters or terminal blocks. Cover: high, hinged. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50...150 oC (housing). Protection: IP66/68, NEMA 4X (housing). | Enquire |
| 71182602 | Seal5x O-ring 3.69x1.78 5x 0-ring 74.7x2.75 | Details |
| TA30H- | Junction box TA30HRetainer for terminal block or head transmitter + optional display. Design: explosion proof Cover: screwed, optional window. Material: aluminium. Coating: polyester powder-coating. Colour: body blue, cover grey. Ambient temp.: -50#150 oC (housing). Protection: IP66/68, NEMA 4X (housing). Protection Ex d/XP: IP66/67 (housing). | Enquire |
| 71600564 | O-ring 74x3 75° VMQ silicone rubberPacking unit: 5 pieces | Details |
| 51004948 | front cover latch pinScrew, washer, spring washer | Details |
| XPT0002- | plug connector | Enquire |
| RK01- | System component RK01 | Enquire |
| 71638066 | Cable gland M20x1.5 ATEX/IECEx | Details |
| 51006845 | cable glandCable gland NPT 1/2, D4-8.5, IP68 | Details |
| 51004490 | blind cover | Details |
| FXA195- | Communication interface FXA195Modem to connect HART field devices to a computer via USB. Commissioning of field devices with software tool. :: To connect to a intrinsically safe signal circuit. :: SIL2, IEC61508. | Enquire |
| TMT82- | Temperature transmitter TMT822-wire temperature transmitter. Dual universal sensor input. Galvanic isolation 2kV (input/output). Application: RTD, TC, Ohm and mV. Presetting failure current high. Consider additional marine certificate requirements on application side. ::Highly reliable due to drift detection and sensor back up. ::Optional also for safety critical applications by means of SIL 2/3 acc. to IEC61508. | Enquire |
| 71044061 | equipment package2x screws, 2x springs, 2x spring rings, 1x sealing CDI-connector | Details |
| 71044062 | equipment package2x screws, 1x sealing CDI-connector | Details |
| TID10- | Temperature transmitter display TID10to plug on. Dot-Matrix measured value display. 12 DIP-switches buttom side. Settings: FF: Simulation, Write Lock. PA: Bus address, Write Lock. Compatible: TMT85, TMT84. | Enquire |
| 71086650 | TID10 service cableExtension cable for the CDI-interface for remote operation of the TID10 display for service and maintenance work. Length: 40cm. | Details |
| 71528231 | DIN rail mounting accessoryClip according to IEC 60715 for temperature head transmitters. Packing unit: 2 pieces | Details |
| 71274384 | pipe mounting bracket | Details |
| 71274372 | Wall mounting bracket | Details |
Configurator / Comparison
Accessories / Spare parts
Source:Endress+Hauserpublic information from the website
Measuring principle video
Click to playCase Studies
Municipal Wastewater Treatment · Temperature transmitter — Application Case
Site Conditions
This is a Municipal Wastewater Treatment customer whose plant is at the inlet, biological and outlet stages of a municipal plant. The main task was converting RTD or thermocouple signals into a standard current output.
The Problem
The difficulty lies in high solids and corrosive fractions, with large diurnal flow swings; at the same time effluent parameters drift and probes foul with sludge and biofilm. Specification therefore means choosing integral or remote versions by ambient, Ex zone and mounting.
What We Did
We took a temperature range approach — temperature solution matched to measuring point and response needs. Delivery was built around choosing integral or remote versions by ambient, Ex zone and mounting, with point-by-point checks on: stable compliance with Grade 1A discharge limits and online data reporting.
Operating Outcome
In service the system performs as intended — better noise immunity and much smaller transmission error, with routine maintenance falling noticeably.
Food & Beverage · Temperature transmitter — Application Case
Application Context
dosing, pasteurising, filling and CIP stages is a typical Food & Beverage duty. The project started from Temperature transmitter, focusing on converting RTD or thermocouple signals into a standard current output.
Process Constraints
frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles, and syrups, dairy and beverages that scale easily, under strict hygienic requirements only amplify it. The Temperature transmitter specification must therefore cover choosing integral or remote versions by ambient, Ex zone and mounting.
Delivery Approach
Delivery was handled as the temperature range — temperature solution matched to measuring point and response needs. Execution centred on choosing integral or remote versions by ambient, Ex zone and mounting, together with food-safety and hygienic design per 3-A / EHEDG.
Field Results
Operation shows the benefit clearly — better noise immunity and much smaller transmission error, with confidence in this measuring point improving markedly.
Chemical & Pharmaceutical · Temperature transmitter — Application Case
Customer Profile
The typical setting in Chemical & Pharmaceutical is reactors, metering vessels and finished-product tanks. The measuring point is Temperature transmitter; the focus is converting RTD or thermocouple signals into a standard current output.
Key Difficulties
Conditions are highly corrosive media with solvents and crystallisation, partly in explosive atmospheres and, on top of that, corrosion plus Ex protection shortens instrument life and makes downtime costly, which a standard configuration cannot handle for long. The design therefore starts with choosing integral or remote versions by ambient, Ex zone and mounting.
Implementation
The scope ran through the temperature range: temperature solution matched to measuring point and response needs. Technically it hinges on choosing integral or remote versions by ambient, Ex zone and mounting, and on these requirements: Ex certification and GMP traceability of records.
Customer Benefit
In practice this means better noise immunity and much smaller transmission error, which cut the workload on the site maintenance team.
Power & Energy · Temperature transmitter — Application Case
Project Background
The project covers boiler feedwater, turbine condensate and FGD/DeNOx systems. The work centres on Temperature transmitter and the core task is converting RTD or thermocouple signals into a standard current output.
Operating Challenges
The medium and duty are characterised by high temperature and pressure with both steam and saline water, and drift under high temperature and pressure, with very costly unplanned outages. So Temperature transmitter cannot be specified generically — it calls for choosing integral or remote versions by ambient, Ex zone and mounting.
Solution
The Ainstru engineering team worked through the temperature range: temperature solution matched to measuring point and response needs. The configuration involves choosing integral or remote versions by ambient, Ex zone and mounting, with these requirements in view: compliance with power-industry codes and unit availability targets.
Results
Since start-up the system has run steadily; the practical result is better noise immunity and much smaller transmission error.
Related Products
Endress+HauseriTEMP TMT72, Transmitter HART
Endress+HauseriTEMP TMT182, Head Transmitter HART
Endress+HauseriTEMP TMT71, Transmitter 4-20mA
Endress+HauseriTEMP TMT80, Head Transmitter
Endress+HauseriTEMP TMT31, Transmitter 4-20mA
Endress+HauseriTEMP TMT142, Field Transmitter HART
Endress+HauseriTEMP TMT122,Transmitter DINrail HART
Endress+Hauser