Product family：
iTEMP TMT82, Transmitter HART
Temperature transmitter
iTEMP TMT82, Transmitter HART；Approval Non-hazardous area；Communication/Output Signal HART; 1x 4-20mA；Electrical Connection Screw terminals, housing for DIN rail mounting 17.5mm；Field Housing W/o；Conf
Order Code：TMT82-AAA3CB1A1AAA1+LA
Name：iTEMP TMT82, Transmitter HART
Configuration
| Code | Name | Order | Specification |
|---|---|---|---|
| 010 | Approval | AA | Non-hazardous area |
| 020 | Communication; Output Signal | A | HART; 1x 4-20mA |
| 030 | Electrical Connection | 3 | Screw terminals, housing for DIN rail mounting 17.5mm |
| 040 | Field Housing | C | W/o |
| 050 | Configuration Universal Input | B1 | Ch1: RTD 3-wire, Ch2: inactive |
| 060 | Sensor Type Input 1 | A1 | Pt100, IEC60751 (a=0.00385), -200...+850oC, min. span 10K |
| 070 | Sensor Type Input 2 | AA | Inactive |
| 080 | Input; Interconnection | A1 | PV=CH1; CH2 inactive |
| 590 | Additional Approval | LA | SIL |
Configuration Explained
This is a temperature transmitter, mounted on a DIN rail, width 17.5 mm, converts the RTD signal into a standard signal, with HART communication, 1 x 4-20mA output, screw terminal connection, without field housing, channel 1 for Pt100 RTD, 3-wire connection, range -200 to 850 °C, minimum span 10 K, channel 2 used for shielding, with SIL conformity declaration, suitable for dense cabinet installation, ready for service once installed on site, mounted in a row in the cabinet, neat wiring, easy circuit tracing.