Overview
Blackstone Chemical Pump A great deal of time, effort and research has gone into the production of BlackStone Pumps, making sure they are manufactured to the highest level of mechanical precision, capable of resisting the negative effects of most aggressive chemicals. The low-maintenance BlackStone range covers a wide spectrum of dosing capacities and all made with positive displacement solenoid driven pumps that use a minimum number of moving parts, therefore reducing the risk of mechanical failure and ensuring each stroke is identical for a consistent flow rate. (Scroll down for a full list of materials used in the pump’s construction.) Each pump measures 194 x 165 x 121 mm (7.6 x 6.5 x 4.8 inches), and weighs 3 kg (6.6lb).
Installation has been made easy with ready-drilled holes for horizontal or vertical mounting. Easy operation has also been considered with a single control for pump output. *IP65 (International Protection Rating) equals dust tight and water jet protected.
BL1.5-2 BlackStone Chemical Dosing Pump The BL1.5-2 BlackStone Chemical Dosing Pump has a flow rate of 1.5 LPH (Litres per hour), rated pressure 13 bar (188.5psi), and dosing frequency strokes per minute of 120. Power supply: 220/240 VAC. Simple operation is guaranteed with a single control for pump output.
The external flow rate control (potentiometer), on the face of the pump, allows users to adjust the percentage of flow from 0 to 100 per cent thus eliminating concerns over stroke rate or power settings. An LED Indicator lights up each time a stroke begins, allowing the user to keep an eye on the stroke rate from a distance. Each pump is supplied with discharge and suction valves.
Accessories available: HI-721004 Injection Valve assembly HI-721005 Foot valve assembly HI-721101 Pump head, O-ring, screws and washer HI-721102 Discharge valve assembly HI-721103 - Suction valve assembly HI-721008 - Ceramic weight (4) HI-720011D - Magnet and coil for BL Pumps (230VAC) HI-720011U - Magnet and coil for BL pumps (115VAC) HI-720025 - Pump body HI-720034 - Magnet pump head assembly for BL pumps HI-721001 - Complete pump head with valves HI-72001 - Tube nut, 5 x 8 mm dia. (100 pcs) HI-721009 - Diaphragm HI-721010 - PTFE coated O-ring for pump head HI-721011 - Aluminium piston, insulation disk, washer and springs replacement kit for BL pump HI-721013 - Piston set for BL pump HI-721014 - Bottom housing and housing seal HI-721104 - Small diaphragm for BL pumps HI-721105 - BlackStone spare pump head HI-721106 - BlackStone pump head assembly Materials used in a BlackStone Chemical Dosing Pump's construction: Pump head in PVDF (Polyvinylidene Fluoride) Diaphragm - a one-piece construction made from the very resistant PTFE (Polytetrafluoroethylene). Ball valves - glass O-rings - FPM/FKM (Fluoro Rubber) 5 x 8mm polyethylene tubing
Specifications
| Parameter | Value |
|---|---|
| SKU | BL-1.5-2 |
| Max output | 1.5 LPH (0.4 gph) |
| Rated pressure/dosing frequency strokes per min | 13 bar (188.5 psi)/120 |
| Pump Casing | fiber-reinforced polypropylene |
| Materials | pumphead in PVDF (PolyVinyliDene Fluoride), diaphram in PTFE (PolyTetraFluoro-Ethylene), glass ball valves and O-rings in Viton ® polyethylene 5 x 8 mm tubing and 2/8" injection fitting |
| Self Priming | max height: 1.5 m (5 feet) |
| Power Supply | See Order Info Chart |
| Max Power Consumption | approx 200 W |
| Protection | IP65 |
| Environment | 0 to 50°C (32 to 122°F); RH max 95% non-condensing |
| Dimensions | 165 x 194 x 121 mm (6.5 x 7.6 x 4.8") |
| Weight | approx. 3 kg (6.6 lb.) |
Manuals and documentation
Related Products
HANNA InstrumentsEPA Compliant Turbidity and Free & Total Chlorine Meter
HANNA InstrumentsHardness, High Range Test Kit
HANNA InstrumentsAlkaline battery size AAA
Large pump head assembly
HANNA InstrumentsRugged Case for Waterproof Meters with Moulded Insert
HANNA InstrumentsAuger for Ground Penetration
HANNA InstrumentsChromium VI High Range Handheld Colorimeter - Checker HC
HANNA Instruments