Overview
BL-932700 is an ORP mini controller that has been designed for easy, affordable installation in tight spaces, ideal for simple yet effective process control. As a result of its compact size, BL-932700 can be installed right next to tanks or vats. An included matching pin option helps protect the sensor from ground loop effects that may lead to erratic readings or system damage.
Large Clear LCD Fire Retardant Casing BNC Connection Adjustable Dosing Relay The BL-932700 features a dosing relay which may be configured to dose above or below a user programmable mV setpoint. Selectable Overdose Protection The mini controller may be programmed to deactivate a valve, pump, or connected device if its activation continues over a selected time; adjustable from 5 to 30 minutes. Selectable Control Override With the flick of a switch, normal “Auto” operation may be overridden turning your connected device “Off” from operation or always “On.” Analogue Output Communication The BL-932700 features a 4 - 20 mA analogue output for connection to a data logger, chart recorder, or other device.
External Disabling Feature A normally open contact may connect to a level controller or flow monitor. This safety feature may be used to prevent continuous dosing in the event of specific or undesired system conditions. Matching Pin Connection An included matching pin option helps protect the sensor from ground loop effects that may lead to erratic readings or system damage.
Specifications
| Parameter | Value |
|---|---|
| SKU | BL-932700-1 |
| Range | ±1000 mV |
| Resolution | 1 mV |
| Accuracy | ±5 mV |
| Calibration | manual, with CAL trimmer |
| Dosing Relay | 1, max 2A (fuse protected), 250 Vac, 30 Vdc |
| Dosing Selection | reducing or oxidizing contact open = reducing dosage, activated when reading exceeds setpoint value contact closed = oxidizing dosage; activated when reading falls below setpoint value |
| Setpoint | adjustable from -1000 to 1000 mV |
| Overtime | adjustable, typically from 5 to approx. 30 minutes |
| Recorder Output | 4-20 mA, accuracy ±0.20 mA, 500 Ohm max load |
| Input Impedance | 10 2 Ohm |
| Power Supply | 115/230VAC; 50/60Hz |
| Dimensions | 83 x 53 x 99 mm (3.3 x 2.1 x 3.9") |
| Weight | 300g |
Manuals and documentation
Related Products
HANNA InstrumentsEPA Compliant Turbidity and Free & Total Chlorine Meter
HANNA InstrumentsHardness, High Range Test Kit
HANNA InstrumentsAlkaline battery size AAA
Large pump head assembly
HANNA InstrumentsRugged Case for Waterproof Meters with Moulded Insert
HANNA InstrumentsAuger for Ground Penetration
HANNA InstrumentsChromium VI High Range Handheld Colorimeter - Checker HC
HANNA Instruments