Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

BL-983319-0

BL-983319-0
Mini TDS controller 0 to 1999 ppm
HANNA Instruments BL-983319-0
These meters permit automatic control of installations that were previously checked manually. This meter is no longer supplied with an electrode, the HI-7634-00 can be ordered as an additional item. R

Overview

These meters permit automatic control of installations that were previously checked manually. This meter is no longer supplied with an electrode, the HI-7634-00 can be ordered as an additional item. Readings are shown on the display and the multi-coloured LED continuously indicates if the mini-controller is in measurement, dosing or alarm mode.

Users can choose automatic or manual dosing mode with a switch on the front panel. Manual control is particularly useful during maintenance operations, because it permits operators to enable or disable the dosing relay according to your need. The overtime control system advises users when the relay is active too long, helping to prevent over-dosage.

Specifications

ParameterValue
SKUBL-983319-0
Range0.0 to 199.9 µS/cm
Resolution0.1 µS/cm
Accuracy±2% F.S.
TDS Conversion Factor0.5
ProbeHI-7634-00 (not included)
Temperature CompensationAutomatic, 5 to 50°C (41 to 122°F) with ß = 2%/°C
Calibrationmanual, with CAL trimmer
Dosing Relaymax 2A (fuse protected), 250 Vac
Dosing SelectionRelay activated (contact closed) when the measurement reading is greater than the setpoint
Setpointadjustable from 0 to 199.9 µS/cm
Overtimeadjustable, typically from 5 to approx. 30 minutes
Power Supply12 VDC adapter (included)
Dimensions83 x 53 x 99 mm (3.3 x 2.1 x 3.9")
Weight200 g (7.1 oz.)

Manuals and documentation