Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

BL-983321-0

BL-983321-0
TDS Mini Controllers (Range 0.00 to 19.99 ppm)
HANNA Instruments BL-983321-0
Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid th

Overview

Users may choose from automatic or manual dosing modes. When in automatic mode the dry contact relay is activated when a reading is above the set point. The relay can be used to activate a solenoid that switches from one DI (deionised) tank to another or to open a valve that will allow lower TDS water to flow into a tank being monitored in order to lower its TDS.

The BL-983321 can also be used to monitor the quality of water produced from ion exchange, reverse osmosis (RO) or distillation. *The BL-983321 uses a 0.5 conversion factor in which 1.00 μS/cm = 0.50 ppm. Adjustable Dry Contact Dosing Relay The BL-983321 features a dosing relay that is activated when the reading is above a user programmable set point.

Programmable Overdose Protection For enhanced safety the mini controller can be programmed to deactivate the dosing relay if the set point is not reached within a specified time interval. The overdosing timer is programmable from 5 to 30 minutes or disabled. Relay Control Override With the flick of a switch the mini controller's relay can be disabled (Off), placed in control (Auto), or be activated for manual operation (On) which is useful for priming a dosing pump.

Multicolour LED Indicator Multicolour LED indicator allows an operator to quickly check the status of the controller. Green = Meter in measurement mode and reading is below the set point Orange/Yellow = Reading is above the set point and the relay is activated Blinking Red = Indicates an alarm condition such as when the maximum dosing time has been exceeded Fuse Protected Dosing Contacts The relay dosing contact is rated for up to a 2A load and is fuse protected. Labelled Termination Connections Quick-connect terminal blocks are clearly labelled for easy connection to power, conductivity probe and relay that can be used to operate a dosing pump, valve, audible alarm, or light.

1/2" NPT Male Threaded Amperometric Probe for Mounting In-line* The BL-983321 mini controller uses the HI-7634-00 conductivity probe that is available with different cable lengths. *HI-7634-00 is not included and must be ordered separately. Order Information: The BL 983321 is supplied with mounting brackets, transparent cover, and instructions.

Specifications

ParameterValue
SKUBL-983321-0
Range0 to 19.99 ppm
Resolution0.01 ppm
Accuracy±2% F.S.
TDS Conversion Factor0.5
ProbeHI 7634-00 (not included)
Temperature CompensationAutomatic, 5 to 50°C (41 to 122°F) with ß = 2%/°C
Calibrationmanual, with CAL trimmer
Dosing Relay1, max 2A (fuse protected), 250 Vac, 30 Vdc contact closed when reading exceeds setpoint value
Setpointadjustable from 0 to 19.99 ppm
Overtimeadjustable, typically from 5 to approx. 30 minutes
Power Supply12 VDC adaptor included
Dimensions83 x 53 x 99 mm (3.3 x 2.1 x 3.9")
Weight200g

Manuals and documentation