Overview
The BL101-00 is a wall-mounted, built-in pump ORP/temperature process controller that uses the HI20083 platinum tip ORP/temperature probe connected via a single waterproof Quick Connect DIN connector. It supports on/off and proportional dosing control with adjustable set point, hysteresis/proportional band, startup delay timer, and overtime overfeed protection. The alarm system uses red, light green, and green color-coded backlight and includes an SPDT alarm relay output.
Specifications
| Parameter | Value |
|---|---|
| SKU | BL101-00 |
| Calibration | process calibration: single point, adjustable (± 50 mV around measured ORP value) |
| Process Instrumentation Range | -5.0 to 105°C (23.0 to 221.0°F) |
| Temperature Resolution | 0.1°C (0.1°F) |
| Accuracy (@25°C/77°F) | ±0.5°C (±0.9°F) |
| Dosing Control Type | On/Off control using adjustable set point (200 to 900 mV) with adjustable hysteresis (10 to 100 mV); proportional control using adjustable set point (200 to 900 mV) with adjustable proportional band (10 to 200 mV); high or low mode operation |
| Dosing Control Activation | high set point dosing is activated when reading is higher than set point; low set point dosing is activated when reading is lower than set point (dose oxidizer) |
| Delay Start for Dosing | startup delay timer at power-on (0 to 600 sec.) |
| Maximum Dosing Time | overfeed protection using overtime safety timer (1 to 180 min. or Off) |
| Pump Flow Control | selectable flow rate (0.5 to 3.5 L / hour; 0.13 to 0.92 G/hour); manual control for pump priming |
| Alarm Relay Output (1) | SPDT 2.5A / 230 VAC |
| External Event Input | input for level controller or flow switch to disable dosing pump in the event of no chemical when using a level controller or no flow when using a flow switch - galvanically isolated |
| Probe Input (1) | HI20083 Platinum tip ORP/Temperature probe with quick connect DIN connector - galvanically isolated |
| Power Supply | 100-240 VAC, 50/60 Hz |
| Power Consumption | 15 VA |
| Environment | 0-50°C (32-122°F), max. 95% RH non-condensing |
| Dimensions | 90 x 142 x 80 mm (3.5 x 5.6 x 1.8") |
| Weight | 910 g (32 oz.) |
| Casing | wall mounted, built-in pump, IP65 rated |
Related Products
HANNA InstrumentsPortable multi-range conductivity meter
View →
HANNA InstrumentsLow range ammonia nitrogen portable photometer
View →
HANNA InstrumentsPortable multi-range turbidimeter
View →
HANNA InstrumentsPortable honey color analyzer
View →
HANNA InstrumentsSaltwater aquarium salinity meter
View →
HANNA InstrumentsPortable free chlorine photometer
View →
HANNA InstrumentsBluetooth smart pH meter
View →
HANNA InstrumentsPortable free and total chlorine photometer
View →