Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

BL123-20

A
Wall-mounted process controller with built-in pump
This is a wall-mounted process controller with built-in pump, IP65 rated, measuring pH/ORP/temperature.

Overview

This is a wall-mounted process controller with built-in pump, IP65 rated, measuring pH/ORP/temperature. It supports automatic logging for 120 days with 30s/1m/5m/15m/30m/1h intervals (or 100 logs), with log files in CSV format exportable on USB key. It features an alarm system, password protection, USB-C storage interface and RS485 interface.

Specifications

ParameterValue
SKUBL123-20
Power Supply100-240 VAC
Power Consumption15 VA
Environment0-50 °C (32-122 °F); Max. 95% RH non-condensing
Dimensions245 x 188 x 55 mm (73 mm with pumps); 9.6 x 7.4 x 2.2" (2.9" with pumps)
Weight1700 g (60 oz.)
CasingWall mounted, built-in pump, IP65 rated
Storage interfaceUSB-C
Log FeatureAutomatic log; 120 days logging with 30s/1m/5m/15m/30m/1h intervals (or 100 logs); pH / ORP / temperature measurements; Events: alarms / errors / power outage; Recall table / graphic modes; Export on USB key; Log files in CSV format
Alarm relay outputSPDT 5A/230 Vac; Activated by selectable pH / ORP / Temperature alarm conditions
Analog outputsThree configurable analog outputs, 4 to 20 mA, sourcing; Output impedance ≤ 500 Ω; Accuracy < 0.5 % FS; Galvanic isolation, up to 50 V relative to earth
Three digital inputsOne input for low level in acid / base tank (contact open); One input for low level in chlorine tank (contact open); One input for Hold mode (contact open)
Single probe inputProbe type: HI1036-18XX* pH / ORP /Temperature / Matching pin, combined digital probe; DIN waterproof connector; Galvanic isolation; RS485 interface
Password protectionThe setup, calibration and log recall features are password protected
GLPpH / ORP