Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

BL131-10

A
In-line pH/ORP/Temperature Process Controller
The BL131-10 is an in-line configuration process controller for direct probe installation into existing piping, with internal pumps and IP65 rating.

Overview

The BL131-10 is an in-line configuration process controller for direct probe installation into existing piping, with internal pumps and IP65 rating. It measures pH, ORP, air and solution temperature, and automatically logs measurements. It features a freeze protection mode where air temperature measurement triggers a relay to activate the recirculation pump to prevent water freezing in the pipes. It is supplied with the HI1036-1802 combined electrode (pH/ORP/Temperature) and other accessories.

Specifications

ParameterValue
SKUBL131-10
Power100 - 240 Vac; 50/60 Hz; 0.7A
Environment0-50 °C (32-122 °F); Maximum 95 % RH non-condensing
Dimensions300×205×95 mm
Weight1700 g (60 oz)
CasingWall mounted, internal pumps, IP65 rated in-line configuration for direct probe installation into existing piping
Analog outputs3 × galvanically isolated, user configurable 4-20mA outputs; Current sensing resistor ≤ 500 Ω
Accuracy (BL131)< 0.5 % FS
Three digital inputs3× galvanically isolated, powered contact, digital input; Low level acid / base tank (contact open); Low level chlorine tank (contact open); Hold mode (contact open)
Probe inputHI1036-1802 multiparameter digital probe is equipped with: pH / ORP / Temperature sensors and a matching pin IP65 connector
接口Galvanic isolated; RS485 interface
RelaysAll relays are fuse protected with 2A time delay 5x20mm cartridge fuses; All relays are rated for 250VAC / 30VDC 2A resistive load