Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

BL931700

BL931700

Panel mount pH mini controller

pH mini controller with analog output

Product Overview

BL931700

  • pH mini controller with analog output-

  • Order No.: BL931700-web

  • As low as

  • 5220.00

  • The BL931700 is a compact single-setpoint pH controller designed for applications where space and/or cost are important. Its adjustable dosing relay can be configured for dosing above or below the pH setpoint. The user can select automatic or manual dosing mode for easy maintenance and troubleshooting. The device contains a high-impedance pH input and can be used with any pH electrode with a standard BNC connector.

  • Large, clear LCD display

  • The large LCD clearly displays the parameter you are monitoring.

  • Flame-retardant housing

  • Special materials provide additional protection in emergency situations,

  • BNC connection

  • The controller's high-impedance pH input can be used with any pH electrode with a standard BNC connector.

Order No. BL931700-web
Product name pH mini controller with analog output - BL931700
Quote required Yes
pH range 0.00 to 14.00 pH
pH resolution 0.01 pH
pH accuracy ±0.02 pH
pH calibration Manual, 2-point via offset and slope trimmers
pH input impedance 10¹² ohms
pH dosing relay Max. 2A (fuse protected), 250 Vac, 30 VDC
pH dosing setpoint Adjustable from 0 to 14 pH
Overdose control Adjustable, typically from 5 minutes to approximately 30 minutes
Analog output signal 4 to 20 mA, accuracy ±0.20 mA, max. load 500 Ω
Power supply BL931700-0
Dimensions 83 x 53 x 99 mm (3.3 x 2.1 x 3.9 in)
Weight BL931700-0
Ordering information BL931700-0 (12 VDC) and BL931700-1 (115/230 VAC) are supplied with mounting bracket, transparent cover and instruction manual.
Municipal Wastewater Treatment

Municipal Wastewater Treatment · Hanna — Stock Configuration Case

Project Overview

The site is the inlet, biological and outlet stages of a municipal plant. The customer wanted Hanna properly configured on the existing plant, with the aim of covering portable and laboratory water testing with Hanna instruments.

Technical Challenges

What actually causes trouble is high solids and corrosive fractions, with large diurnal flow swings, and effluent parameters drift and probes foul with sludge and biofilm. All of this means the Hanna configuration has to involve selected by parameter set, accuracy and field portability.

Configuration

Supply and installation were organised through the stock channel: configuring from stock and delivered quickly. On site this meant selected by parameter set, accuracy and field portability, checked line by line against: stable compliance with Grade 1A discharge limits and online data reporting.

Performance

After commissioning the outcome is results available on site, reducing lab re-checks, and the readings are now used for process tuning.

Food & Beverage

Food & Beverage · Hanna — Stock Configuration Case

Site Conditions

This is a Food & Beverage customer whose plant is at dosing, pasteurising, filling and CIP stages. The main task was covering portable and laboratory water testing with Hanna instruments.

The Problem

The difficulty lies in syrups, dairy and beverages that scale easily, under strict hygienic requirements; at the same time frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles. Specification therefore means selected by parameter set, accuracy and field portability.

What We Did

We took a stock channel approach — configuring from stock and delivered quickly. Delivery was built around selected by parameter set, accuracy and field portability, with point-by-point checks on: food-safety and hygienic design per 3-A / EHEDG.

Operating Outcome

In service the system performs as intended — results available on site, reducing lab re-checks, with routine maintenance falling noticeably.

Chemical & Pharmaceutical

Chemical & Pharmaceutical · Hanna — Stock Configuration Case

Application Context

reactors, metering vessels and finished-product tanks is a typical Chemical & Pharmaceutical duty. The project started from Hanna, focusing on covering portable and laboratory water testing with Hanna instruments.

Process Constraints

corrosion plus Ex protection shortens instrument life and makes downtime costly, and highly corrosive media with solvents and crystallisation, partly in explosive atmospheres only amplify it. The Hanna specification must therefore cover selected by parameter set, accuracy and field portability.

Delivery Approach

Delivery was handled as the stock channel — configuring from stock and delivered quickly. Execution centred on selected by parameter set, accuracy and field portability, together with Ex certification and GMP traceability of records.

Field Results

Operation shows the benefit clearly — results available on site, reducing lab re-checks, with confidence in this measuring point improving markedly.

Power & Energy

Power & Energy · Hanna — Stock Configuration Case

Customer Profile

The typical setting in Power & Energy is boiler feedwater, turbine condensate and FGD/DeNOx systems. The measuring point is Hanna; the focus is covering portable and laboratory water testing with Hanna instruments.

Key Difficulties

Conditions are high temperature and pressure with both steam and saline water and, on top of that, drift under high temperature and pressure, with very costly unplanned outages, which a standard configuration cannot handle for long. The design therefore starts with selected by parameter set, accuracy and field portability.

Implementation

The scope ran through the stock channel: configuring from stock and delivered quickly. Technically it hinges on selected by parameter set, accuracy and field portability, and on these requirements: compliance with power-industry codes and unit availability targets.

Customer Benefit

In practice this means results available on site, reducing lab re-checks, which cut the workload on the site maintenance team.