Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

BL982411

BL982411

Compact ORP process controller

ORP micro controller

BL982411 is a compact, easy-to-operate, and efficient ORP process controller designed for applications where space or cost is important. The device can be used with any ORP electrode with a standard BNC connector. Its adjustable dosing relay can be configured to trip above or below a user-programmable mV setpoint. Users can select automatic or manual dosing mode for easy maintenance and troubleshooting.

Large, clear LCD

The large LCD clearly displays the parameter you are monitoring.

Flame-retardant housing

Special materials provide extra protection in emergency situations.

BNC connection

The controller's high-impedance pH input can be used with any pH electrode with a standard BNC connector.

Order No. BL982411-web
Product name ORP mini controller – BL982411
Quote required Yes
ORP range 0.0 to 199.9 ppm (mg/L)
ORP resolution 0.1 ppm (mg/L)
ORP accuracy ±2% f.s.
mV (ORP) calibration Manual, with CAL trimmer
mV (ORP) dosing relay Max. 2A (fuse-protected), 250 Vac, 30 VDC
mV (ORP) dosing setpoint Adjustable from 0 to 199.9 mg/L (ppm)
Dosing terminal Reducing or oxidizing, selectable on the rear panel
Contact open = reducing agent dose = relay on if measurement>setpoint
Contact closed = oxidizing agent dose = relay on if measurement<setpoint
Overdose control Adjustable, typically from 5 minutes to approximately 30 minutes
Power supply Model“-0”
Dimensions 83 x 53 x 99 mm (3.3 x 2.1 x 3.9 in)
Weight Model“-0”
Ordering information BL983315-1 (115/230 VAC) and BL983315-0 (12 VDC) are supplied with mounting bracket, transparent cover, and instruction manual.
Municipal Wastewater Treatment

Municipal Wastewater Treatment · Hanna — Stock Configuration Case

Project Overview

The site is the inlet, biological and outlet stages of a municipal plant. The customer wanted Hanna properly configured on the existing plant, with the aim of covering portable and laboratory water testing with Hanna instruments.

Technical Challenges

What actually causes trouble is high solids and corrosive fractions, with large diurnal flow swings, and effluent parameters drift and probes foul with sludge and biofilm. All of this means the Hanna configuration has to involve selected by parameter set, accuracy and field portability.

Configuration

Supply and installation were organised through the stock channel: configuring from stock and delivered quickly. On site this meant selected by parameter set, accuracy and field portability, checked line by line against: stable compliance with Grade 1A discharge limits and online data reporting.

Performance

After commissioning the outcome is results available on site, reducing lab re-checks, and the readings are now used for process tuning.

Food & Beverage

Food & Beverage · Hanna — Stock Configuration Case

Site Conditions

This is a Food & Beverage customer whose plant is at dosing, pasteurising, filling and CIP stages. The main task was covering portable and laboratory water testing with Hanna instruments.

The Problem

The difficulty lies in syrups, dairy and beverages that scale easily, under strict hygienic requirements; at the same time frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles. Specification therefore means selected by parameter set, accuracy and field portability.

What We Did

We took a stock channel approach — configuring from stock and delivered quickly. Delivery was built around selected by parameter set, accuracy and field portability, with point-by-point checks on: food-safety and hygienic design per 3-A / EHEDG.

Operating Outcome

In service the system performs as intended — results available on site, reducing lab re-checks, with routine maintenance falling noticeably.

Chemical & Pharmaceutical

Chemical & Pharmaceutical · Hanna — Stock Configuration Case

Application Context

reactors, metering vessels and finished-product tanks is a typical Chemical & Pharmaceutical duty. The project started from Hanna, focusing on covering portable and laboratory water testing with Hanna instruments.

Process Constraints

corrosion plus Ex protection shortens instrument life and makes downtime costly, and highly corrosive media with solvents and crystallisation, partly in explosive atmospheres only amplify it. The Hanna specification must therefore cover selected by parameter set, accuracy and field portability.

Delivery Approach

Delivery was handled as the stock channel — configuring from stock and delivered quickly. Execution centred on selected by parameter set, accuracy and field portability, together with Ex certification and GMP traceability of records.

Field Results

Operation shows the benefit clearly — results available on site, reducing lab re-checks, with confidence in this measuring point improving markedly.

Power & Energy

Power & Energy · Hanna — Stock Configuration Case

Customer Profile

The typical setting in Power & Energy is boiler feedwater, turbine condensate and FGD/DeNOx systems. The measuring point is Hanna; the focus is covering portable and laboratory water testing with Hanna instruments.

Key Difficulties

Conditions are high temperature and pressure with both steam and saline water and, on top of that, drift under high temperature and pressure, with very costly unplanned outages, which a standard configuration cannot handle for long. The design therefore starts with selected by parameter set, accuracy and field portability.

Implementation

The scope ran through the stock channel: configuring from stock and delivered quickly. Technically it hinges on selected by parameter set, accuracy and field portability, and on these requirements: compliance with power-industry codes and unit availability targets.

Customer Benefit

In practice this means results available on site, reducing lab re-checks, which cut the workload on the site maintenance team.