Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

BL983329-1

BL983329-1
TDS Mini Controller
HANNA Instruments BL983329-1
These compact, panel mounted, process controllers are for measuring total dissolved solids (TDS) of a process stream.

Overview

These compact, panel mounted, process controllers are for measuring total dissolved solids (TDS) of a process stream. When in automatic mode, the dry contact relay is activated when a reading is above the set point. The relay can be used to supply power to a dosing pump or a solenoid connected to a valve. The controllers feature a large LCD with protective cover. Users may choose from automatic or manual dosing modes.

Specifications

ParameterValue
SKUBL983329-1
Resolution0.1 mg/L (ppm), 1 mg/L (ppm)
Accuracy±2% f.s. at 25 °C (77 °F)
TDS Factor0.5
Temperature Compensationautomatic from 5 to 50°C (41 to 122°F) with β =2%/ºC
Calibrationmanual, with calibration trimmer
Outputgalvanic isolated 4-20 mA output; accuracy ±0.2 mA; 500 Ω maximum load (BL9833XX-2 only)
adjustable setpointcovers measure range
relayrelay closes when reading > setpoint
Dosing contactmaximum 2A (internal fuse protection), 250 VAC or 30 VDC
Dosing overtimedosing relay is disabled if setpoint is not reached within the set time interval. Timer adjustable between aprox. 5 to 30 minutes, or disabled by jumper.
external disable inputNormally Open: enable / Closed: disable dosing (BL9833XX-2 only)
Power Supplymodels "-1": 115/230 VAC; 50/60Hz; input: 10 VA for 115/230 VAC, 50/60 Hz models; fuse protected; installation category II.
Dimensions83 x 53 x 99 mm (3.3 x 2.1 x 3.9'')
Weight115/230 VAC models 300 g (10.6 oz)