Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

HI1217D

HI1217D
Gel pH Electrode With Din connector
General Purpose pH Electrode The HI-1217D is a general purpose pH electrode for the HI-8314 and HI-9210N. This electrode has a 1m cable and DIN connector. Tips for the most accurate measurements Keep

Overview

General Purpose pH Electrode The HI-1217D is a general purpose pH electrode for the HI-8314 and HI-9210N. This electrode has a 1m cable and DIN connector. Tips for the most accurate measurements Keep electrode hydrated Ideally, pH electrodes should be kept in a storage solution when not in use.

Placing the electrode in a small glass filled with storage solution is suitable. An option for pocket meters is to place a small piece of sponge into the meter’s cap and pour storage solution (HI-70300) into the cap to wet the sponge. Alternatively, purchase HI-740200 specialised electrode caps for storage.

Pouring off any excess solution beforehand, the cap can then be placed on the meter. Clean electrodes before use Clean the junction of your electrodes once a day or at least once a week to prevent junction clogging and to maintain accuracy. Immerse the electrode in the proper cleaning solution for at least 15 to 20 minutes.

Hanna offers a wide range of cleaning solutions for general purpose and specific applications. Replace electrode once a year If your electrode takes too long to stabilise a reading, or readings fluctuate wildly, it is most likely time to replace the electrode. The typical life span of any pH electrode is from 6 months to 1.5 years.

Specifications

ParameterValue
SKUHI1217D
ReferenceSingle, Ag/AgCl
JunctionCeramic, single
ConnectorDIN
Electrolytegel
Max Pressure2 bar
Range0 to 13 pH; @ 0 to 70°C
Tip Shapespheric (dia: 5.0mm)
Temperature Sensoryes
Amplifieryes
Body MaterialPEI
Cablecoaxial; 1 m (3.3')
Recommended Usegeneral purpose