Overview
The HI-12301 is a plastic body, double junction, gel filled pH electrode with a matching pin and built-in temperature sensor for temperature compensated measurements in a single probe design. This probe features a 3.5 mm connector designed exclusively to be used with Hanna Instruments edge® Tablet Meters. This electrode features a built-in microchip that stores sensor type, ID, and calibration information that is automatically retrieved by Edge once the electrode is plugged in.
Stored pH calibration information includes: calibrated buffers, date, time, offset and slope characteristics of the electrode. The HI-12301 features an easy to plug in 3.5mm connector and is recommended for use in field applications. The HI-12301 electrode features a built-in microchip that stores sensor type, serial number, and calibration information.
It also features a single ceramic junction and the spherical pH sensing portion is made with general purpose glass. The electrode has a rugged PEI (polyetherimide) body that has the chemical resistance of a glass body in an unbreakable plastic making it ideal for field and industrial applications. The matching pin integrated into the HI-12301 is for the Sensor Check™ capability of the edge pH meter.
This feature is used to identify problems with the pH electrode such as cracks in the sensing glass or poor condition of the reference junction. Built-In Microchip A built-in microchip stores the sensor type, serial number and calibration information including date, time, offset, slope, probe condition and buffers used. This information is automatically retrieved by edge® once the electrode is plugged in.
The ability to transfer information allows for hot swapping of probes without having to recalibrate. All pH measurements are performed within the electrode and transferred digitally to the meter. This overcomes any noise issues associated with the traditional high impedance analogue measuring system.
Electrical noise can be generated from a built in temperature sensor and while working in a humid environment. Spherical Glass Tip The spherical shaped tip design allows for a wide area of contact with the sample. This permits a faster electrode response with a higher degree of stability.
The tip uses a glass formulation that has a resistance of approximately 100 megaohms. This means that measuring conditions are optimal around ambient temperatures. Use of high or low temperature glass around ambient temperatures would not be optimal due to a long response time or a shortened lifespan of the electrode.
Double Junction Reference A double junction electrode has an internal compartment surrounding the reference wire. Silver ions are present in the electrolyte of the internal compartment, which houses the Ag/AgCl reference wire; the electrolyte outside this compartment is silver free. The double junction design means that virtually no silver from the electrode enters the sample.
This design allows measurement in applications where silver ions in the sample are undesirable or silver precipitates on the junction are likely to form. PEI Electrode Body The PEI (polyetherimide) electrode body is suitable for a wide range of applications and excels in field measurements due to its durability. The shielding around the spherical glass tip minimises breakage due to accidental bumping or dropping of the electrode.
The PEI plastic is a high quality plastic that is chemically resistant to many harsh chemicals. Matching Pin The HI-12301 integrates a matching pin into the electrode and is part of the Hanna Instruments Sensor Check™ feature. The matching pin checks the impedance across the indicating and reference electrodes.
This allows the edge meter to alert the user in the event that the glass of the indicating pH electrode is cracked and the condition of the reference junction. Built-In Temperature Sensor HI-12301 features a built-in thermistor temperature sensor that is in the tip of the indicating pH electrode. A thermistor temperature sensor provides for a high accuracy temperature reading and should be as close as possible to the indicating pH electrode in order to compensate for the effect that temperature has on the membrane potential.
By having an accurate reading it is possible to provide an accurate temperature compensated reading. 3.5 Connection – Phono plug electrode connection used on HANNA smart Edge electrodes. Provides a secure, easy-to-use connection.
Specifications
| Parameter | Value |
|---|---|
| SKU | HI12301 |
| Description | combination, digital pH electrode |
| Reference | double, Ag/AgCl |
| Junction | ceramic, single / 15-20 uL/h |
| Electrolyte | gel |
| Max Pressure | 2 bar |
| Range | pH: 0 to 13 |
| Recommended Operating Temp. | -5 to 70°C |
| Tip/Shape | spheric (dia: 7.5 mm) |
| Temperature Sensor | yes |
| Matching Pin | yes |
| Amplifier | yes |
| Body Material | PEI |
| Cable | 1m |
| Recommended Use | field applications |
| Connection | 3.5mm jack |
Accessories
- HI-7004L: HI-7004L pH 4.01 Buffer Solution, 500 mL bottle
- HI-7007L: HI-7007L pH 7.01 Buffer Solution, 500 mL bottle HI7007
- HI-2020-02: HI-2020 edge Hybrid Multiparameter pH EC DO Meter
- HI-70300L: HI-70300L pH Electrode Storage Solution, 500 mL
- HI-7061L: HI-7061L Electrode Cleaning Solution - General Purpose, 500mL
- HI-77400P: HI-77400P pH Combination Buffer Solution Kit 4.01 & 7.01 5 x 5 20ml sachets
Related Products
HANNA InstrumentsSpare pH module for HI-7609829/HI-7629829 series of probes
HANNA InstrumentsT-Type Glass Body pH Electrode
HANNA InstrumentsAmpHel® ORP Electrode with Replaceable Battery
HANNA InstrumentsDirect Soil Probe
HANNA InstrumentspH Electrode with Ground Sleeve
HANNA InstrumentspH Electrode ideal for Chemical Testing, DIN Connector
HANNA InstrumentspH EC TDS and Temperature Electrode
HANNA Instruments