Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

HI1331B

HI1331B
pH Electrode ideal for Long Neck Flasks
The HI-1331B is a glass bodied combination pH electrode with an extra-long reach body (210mm) specifically for measuring pH samples in long neck flasks. Supplied fitted with BNC connector - BNC is one

Overview

The HI-1331B is a glass bodied combination pH electrode with an extra-long reach body (210mm) specifically for measuring pH samples in long neck flasks. Supplied fitted with BNC connector - BNC is one of the most commonly used connector types in pH meters and electrodes. Compatible with any meter or electrode that uses BNC connectors.

1m cable Tips for the most accurate measurements Keep electrode hydrated Ideally, pH electrodes should be kept in a storage solution when not in use. Placing the electrode in a small glass filled with storage solution is suitable. An option for pocket meters is to place a small piece of sponge into the meter’s cap and pour storage solution (HI-70300) into the cap to wet the sponge.

Alternatively, purchase HI-740200 specialised electrode caps for storage. Pouring off any excess solution beforehand, the cap can then be placed on the meter. Clean electrodes before use Clean the junction of your electrodes once a day or at least once a week to prevent junction clogging and to maintain accuracy.

Immerse the electrode in the proper cleaning solution for at least 15 to 20 minutes. Hanna offers a wide range of cleaning solutions for general purpose and specific applications. Replace electrode once a year If your electrode takes too long to stabilise a reading, or readings fluctuate wildly, it is most likely time to replace the electrode.

The typical life span of any pH electrode is from 6 months to 1.5 years.

Specifications

ParameterValue
SKUHI1331B
SkuHI-1331B
DescriptionCombination pH electrode
ReferenceSingle, Ag/AgCl
Junction/flow rateceramic, single / 15-20µL/h
ElectrolyteKCl3.5M+AgCl
Max Pressure0.1 bar
RangepH: 1 to 12
Recommended Operating Temp.0 to 70°C
Glass TypeLT (Low Temperature)
Tip/ShapeSpheric (dia: 7.5mm)
Temperature SensorNo
AmplifierNo
Body Materialglass
CableCoaxial; 1m
Recommended UseSpecifically for flasks
ConnectionHI-1331B BNC

Accessories

  • HI-7004L: HI-7004L pH 4.01 Buffer Solution, 500 mL bottle
  • HI-7007L: HI-7007L pH 7.01 Buffer Solution, 500 mL bottle HI7007
  • HI-7010L: HI-7010L pH 10.01 Buffer Solution, 500 mL bottle
  • HI-70300L: HI-70300L pH Electrode Storage Solution, 500 mL
  • HI-7061L: HI-7061L Electrode Cleaning Solution - General Purpose, 500mL