Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

HI98294

HI98294
GPS Multiparameter Portable pH, EC, ISE, Turbidity, DO Meter
HI-98294 GPS Multiparameter Portable pH, EC, ISE, Turbidity, DO Meter HI-98294 is a portable logging multiparameter system (meter and probe) that monitors up to 14 different water quality parameters (

Overview

HI-98294 GPS Multiparameter Portable pH, EC, ISE, Turbidity, DO Meter HI-98294 is a portable logging multiparameter system (meter and probe) that monitors up to 14 different water quality parameters (7 measured and 7 calculated) such as pH, ORP, turbidity, dissolved oxygen, conductivity, chloride, nitrate, ammonium and temperature. Each parameter is fully configurable. HI-98294 has a graphic, backlit display that automatically sizes the digits to fit the screen with on screen graphing capability.

HI-98294 features an internal 12-channel GPS receiver / antenna module that guarantees a position accuracy of 10 m (30 ft). GPS information can be transferred to a PC and can be viewed using GPS mapping software. Clicking on visited locations, using a mapping software, displays the measurement information.

The GPS coordinates are shown on the LCD together with up to 10 measurement parameters, which are recorded with logged data. A 3-bar antenna indicator, in the bottom right corner of the LCD, indicates GPS signal strength. The multi-sensor probe features an internal temperature sensor and a removable protective shield.

Each meter comes with a protective rubber boot and meets IP67 standard (30 minutes immersion at 1 meter depth). The multi-sensor probe is totally sealed against water and dust, and meets IP68 standard (continuous immersion in water). Main features Monitors up to 14 different water quality parameters Rugged, water-resistant meter and waterproof probe Field-replaceable sensors with auto recognition Instantaneous conductivity and turbidity measurements Built-in barometer for percent saturation and DO concentration compensation Good Laboratory Practice feature, the last 5 calibrations are automatically stored Graphical display of logged data on backlit LCD screen Log-on-demand and automatic logging on meter for all parameters Quick calibration feature to provide single point calibration for pH, conductivity, and dissolved oxygen with one solution Probe shipped with sensors installed Waterproof Quick Connect DIN connection between meter and probe USB-C interface for PC communication The HI-98294 system is easy to setup and use.

The built-in tutorial mode guide users step-by-step through sensor preparation, installation, maintenance, and calibration processes. The meters can log data that can be easily downloaded as a .csv file (or graph) to a type-C, USB flash drive. Rugged Custom Carrying Case The HI-98294 meter, probe, and all accessories are supplied in a rugged carrying case designed to provide years of use.

The inside compartment of the carrying case is thermoformed to securely hold and protect all components. What's included: HI-7698294/4 Multi-sensor probe 1.5V AA alkaline batteries (4 pcs.) HI-7698194-1 pH / ORP sensor (pre-installed on the probe) HI-7698594-4 EC / Turbidity sensor (pre-installed on the probe) HI-7698194-2 Galvanic DO sensor (pre-installed on the probe) HI-7698296 Long protective probe shield HI-7698293 Long calibration beaker HI-9828-20 Quick calibration standard solution (230 mL) HI-9829-16 0 FNU calibration solution (230 mL) HI-9829-17 20 FNU calibration solution (230 mL) HI-9829-18 200 FNU calibration solution (230 mL) HI-710036 Protective rubber boot (fitted on meter) HI-920019 USB-C to USB-C cable Probe maintenance kit includes: DO galvanic membranes, o-rings for DO sensor, o-rings for probe, electrolyte solution for DO sensor, 5 mL syringe, scouring pad, sensor-socket protection, hex key, small brush, sachet with silicone grease Instrument quality certificate Sensors and probe quality certificates Quick reference with QR code for manual download Warranty 2 Years meter 6 months sensors and probes

Specifications

ParameterValue
SKUHI98294
pH / mV
Range0.00 to 14.00 pH / ±600.0 mV
Resolution0.01 pH / 0.1 mV
Accuracy±0.05 pH / ±3.0 mV
CalibrationOne-point Quick Calibration using HI-9828-20; up to three points using pH 4.01, 6.86, 7.01, 9.18, 10.01) standard buffers or one custom buffer
ORP
Accuracy (evaluated with a calibrated system at ambient temperature)±10 mV
EC
TDS
Resistivity
Salinity
Seawater Sigma
Turbidity
Dissolved Oxygen
Pressure CompensationAutomatic: 450 to 850 mmHg
Atmospheric Pressure
Temperature
Ammonium-Nitrogen
Chloride
Nitrate-Nitrogen
Additional Specifications
Temperature Compensationautomatic from -5 to 50°C (23 to 122°F) 268.15 to 323.15K
Logging MemoryInterval logging 50,000 records or log-on-demand (all parameters) 15,000 records
Logging Intervalone second to three hours
GPSyes, 12 channel receiver
ConnectivityUSB-C (HOST) functions – Mass storage host; USB-C (device) functions – Mass storage device
Protection RatingIP67
Environment0 to 50°C (32 to 122°F); RH 100%
Battery Type / Life1.5V AA alkaline batteries (4)
Battery LifeApproximately 40 hours with logging every 1 second, all parameters enabled and GPS on
Dimensions / Weight185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 435g (13.3 oz.)
Probe Specification – HI-7698294
Sensor InputspH, pH/ORP Dissolved Oxygen EC, EC/Turbidity
Sample EnvironmentFresh, brackish, seawater
Waterproof ProtectionIP68
Operating Temperature-5.0 to 50.0°C
Storage Temperature-20.0 to 70.0°C
Maximum depth20m (66 feet)
Dimensions (without cable)342mm; 46mm diameter
Weight (with sensors and batteries)570g
Cable specificationMultistrand-multiconductor shielded cable with internal strength member rated for 90kg intermittent use
Wetted materialsBody – ABS Threads – Nylon Shield – ABS/316 SS Temperature Probe – 316 SS O-rings - EPDM
Sensor Specifications:
HI-7698194-1 pH/ORP sensor
Measurement typepH, mV (pH/ORP)
Measurement range0.00 to 12.00 pH; ±600.0mV (pH); ±2000.0mV (ORP)
Temperature range-5.0 to 50.0°C
Colour CodeRed
MaterialsGlass tip (pH) and ORP (Platinum), Wick junction, PEI body, electrolyte gel and double reference
Maintenance solutionHI-70300 storage solution
Dimensions118 x 15mm
HI-7698594-4 EC/Turbidity sensor
Measurement unitµS/cm, mS/cm, FNU
HI-7698194-2 DO sensor