Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

HI98394

HI98394
GPS Multiparameter Portable pH, EC, ISE, Turbidity, DO Meter with Autonomously Logging Probe
HI-98394 GPS Multiparameter Portable pH, EC, ISE, Turbidity, DO Meter with Autonomously Logging Probe HI-98394 is a portable logging multiparameter system (meter and autonomously logging probe) that m

Overview

HI-98394 GPS Multiparameter Portable pH, EC, ISE, Turbidity, DO Meter with Autonomously Logging Probe HI-98394 is a portable logging multiparameter system (meter and autonomously logging probe) that monitors up to 14 different water quality parameters (7 measured and 7 calculated) such as pH, ORP, turbidity, dissolved oxygen, conductivity, chloride, nitrate, ammonium and temperature. Each parameter is fully configurable. The HI-98394 is designed to withstand harsh environmental conditions and is ideal for field measurements and all the applications listed above.

Each meter comes with a protective rubber boot and meets IP67 standard (30 minutes immersion at 1 meter depth). The multi-sensor probe is totally sealed against water and dust. Plus, it meets IP68 standard (continuous immersion in water).

HI-98394 has a graphic, backlit display that automatically sizes the digits to fit the screen with on screen graphing capability. HI-98394 features an internal 12-channel GPS receiver/antenna module that guarantees a position accuracy of 10 m (30 ft). GPS information can be transferred to a PC and can be viewed using GPS mapping software.

Clicking on visited locations, using a mapping software, displays the measurement information. The GPS coordinates are shown on the LCD together with up to 10 measurement parameters recorded with logged data. A 3-bar antenna indicator, in the bottom right corner of the LCD, indicates GPS signal strength.

The multi-sensor probe features an internal temperature sensor and a removable protective shield. The HI-98394 system is easy to setup and use. The built-in tutorial mode guides users step-by-step through sensor preparation, installation, maintenance, and calibration processes.

The meter can log data that can be easily downloaded as a .csv file (or graph) to a type-C, USB flash drive. Rugged Custom Carrying Case The HI-98394 meter, probe, and all accessories is supplied in a rugged carrying case designed to provide years of use. The inside compartment of the carrying case is thermoformed to securely hold and protect all components.

What's included: HI-7698394/4 Autonomously logging multi-sensor probe HI-76983948 Atmospheric pressure box Probe connector protection cover 1.5V AA alkaline batteries (8 pcs.) HI-7698194-1 pH / ORP sensor (pre-installed on the probe) HI-7698594-4 EC / Turbidity sensor (pre-installed on the probe) HI-7698194-2 Galvanic DO sensor (pre-installed on the probe) HI-7698296 Long protective probe shield HI-7698293 Long calibration beaker HI-9828-20 Quick calibration standard solution (230 mL) HI-9829-16 0 FNU calibration solution (230 mL) HI-9829-17 20 FNU calibration solution (230 mL) HI-9829-18 200 FNU calibration solution (230 mL) HI-710036 Protective rubber boot (fitted on meter) HI-920019 USB-C to USB-C cable Probe maintenance kit includes: DO galvanic membranes, o-rings for DO sensor, o-rings for probe, electrolyte solution for DO sensor, 5 mL syringe, scouring pad, sensor-socket protection*, hex key, small brush, sachet with silicone grease Instrument quality certificate Sensors and probe quality certificates Quick reference with QR code for manual download Warranty 2 Years meter 6 months sensors and probes About the probe and sensors Autonomously Logging Probe Storage of up to 140,000 individual samples or 35,000 complete sample data sets with date and time stamp thus permitting up to a 70 day deployment with all channels logging at 10 minute intervals. Pre-installed Sensors Supplied with pre-installed pH/ORP, EC/Turbidity and DO sensors. Quick Sensor Replacement Sensor replacement is quick and easy with field replaceable, screw type connectors and colour-coded bodies.

Auto-Sensor Recognition This meter automatically recognises sensors. Temperature Sensor The probe incorporates a temperature sensor for temperature compensation of all parameters. Accurate temperature reading in degrees Celsius, Fahrenheit and kelvin are displayed.

Field Ready For field calibration, our quick calibration solution allows standardization of pH and conductivity with one calibration solution. Quick Calibration Simply screw the calibration beaker filled with Quick Calibration solution onto the probe, select “Quick calibration” from the menu and press OK. Individual calibration may also be performed using multiple calibration points.

Specifications

ParameterValue
SKUHI98394
pH / mV
Range0.00 to 14.00 pH / ±600.0 mV
Resolution0.01 pH / 0.1 mV
Accuracy±0.05 pH / ±3.0 mV
CalibrationOne-point Quick Calibration using HI-9828-20; up to three points using pH 4.01, 6.86, 7.01, 9.18, 10.01) standard buffers or one custom buffer
ORP
Accuracy (evaluated with a calibrated system at ambient temperature)±10 mV
EC
TDS
Resistivity
Salinity
Seawater Sigma
Turbidity
Dissolved Oxygen
Pressure CompensationAutomatic: 450 to 850 mmHg
Atmospheric Pressure
Temperature
Ammonium-Nitrogen
Chloride
Nitrate-Nitrogen
Additional Specifications
Temperature Compensationautomatic from -5 to 50°C (23 to 122°F) 268.15 to 323.15K
Logging MemoryProbe only: 140,000 measurements (single parameter logged); 35,000 measurements (all parameters logged) meter and probe: interval logging 50,000 records total or log-on-demand (all parameters) 15,000 records
Logging Intervalone second to three hours
GPSyes, 12 channel receiver
ConnectivityUSB-C (HOST) functions – Mass storage host; USB-C (device) functions – Mass storage device
Protection RatingIP67
Environment0 to 50°C (32 to 122°F); RH 100%
Battery Type / Life1.5V AA alkaline batteries (4)
Battery LifeApproximately 40 hours with logging every 1 second, all parameters enabled and GPS on
Dimensions / Weight185 x 93 x 35.2 mm (7.3 x 3.6 x 1.4”) / 435g (13.3 oz.)
Probe Specification – HI-7698394
Sensor Inputs1 – pH, pH/ORP, ammonium ISE, Chloride ISE, or Nitrate ISE 2 – Dissolved Oxygen 3 – EC, EC/Turbidity
Sample EnvironmentFresh, brackish, seawater
Waterproof ProtectionIP68
Operating Temperature-5.0 to 50.0°C
Storage Temperature-20.0 to 70.0°C
Maximum depth20m (66 feet) - reduced for ISE sensors
Dimensions (without cable)442mm; 46mm diameter
Weight (with sensors and batteries)775g
Cable specificationMultistrand-multiconductor shielded cable with internal strength member rated for 68kg (150lb) intermittent use
Wetted materialsBody – ABS Threads – Nylon Shield – ABS/316 SS Temperature Probe – 316 SS O-rings - EPDM
Sensor Specifications:
HI-7698194-1 pH/ORP sensor
Measurement typepH, mV (pH/ORP)
Measurement range0.00 to 12.00 pH; ±600.0mV (pH); ±2000.0mV (ORP)
Temperature range-5.0 to 50.0°C
Colour CodeRed
MaterialsGlass tip (pH) and ORP (Platinum), Wick junction, PEI body, electrolyte gel and double reference
Maintenance solutionHI-70300 storage solution
Dimensions118 x 15mm
HI-7698594-4 EC/Turbidity sensor
Measurement unitµS/cm, mS/cm, FNU
HI-7698194-2 DO sensor