Technical Data
CompareConductivity
| Measuring Principle | Potentiometric |
| Application | All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector |
| Installation | Connection of digital sensors with Memosens-Protocol |
| Characteristic | Liquiline CM82 is a two-wire transmitter for all areas of process engineering |
| Design | Liquiline CM82 is optionally equipped with Bluetooth for comfortable remote commissioning via Smartphone/Tablets |
| Material | Housing, cover: Peek 151 Strain relief: EPDM Axial ring Peek 450 G |
| Dimension | Diameter: 18.95 mm (0.75 inch) Length: 114.7 mm (4.52 inch) |
| Connection | Connection of digital sensors with Memosens-Protocol |
| Ingress protection | IP67, IP68, NEMA Type 6 |
| Input | One channel transmitter |
| Output / communication | 4 to 20 mA, HART |
ORP / Redox
| Measuring Principle | Potentiometric |
| Application | All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector |
| Installation | Connection of digital sensors with Memosens-Protocol |
| Characteristic | Liquiline CM82 is a two-wire transmitter for all areas of process engineering |
| Design | Liquiline CM82 is optionally equipped with Bluetooth for comfortable remote commissioning via Smartphone/Tablets |
| Material | Housing, cover: Peek 151 Strain relief: EPDM Axial ring Peek 450 G |
| Dimension | Diameter: 18.95 mm (0.75 inch) Length: 114.7 mm (4.52 inch) |
| Connection | Connection of digital sensors with Memosens-Protocol |
| Ingress protection | IP67, IP68, NEMA Type 6 |
| Input | One channel transmitter |
| Output / communication | 4 to 20 mA, HART |
Oxygen
| Measuring Principle | Potentiometric |
| Application | All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector |
| Installation | Connection of digital sensors with Memosens-Protocol |
| Characteristic | Liquiline CM82 is a two-wire transmitter for all areas of process engineering |
| Design | Liquiline CM82 is optionally equipped with Bluetooth for comfortable remote commissioning via Smartphone/Tablets |
| Material | Housing, cover: Peek 151 Strain relief: EPDM Axial ring Peek 450 G |
| Dimension | Diameter: 18.95 mm (0.75 inch) Length: 114.7 mm (4.52 inch) |
| Connection | Connection of digital sensors with Memosens-Protocol |
| Input | One channel transmitter |
| Output / communication | 4 to 20 mA, HART |
pH
| Measuring Principle | Potentiometric |
| Application | All sectors, supporting all sensors with the blue Memosens plug-in head, enviromental sector |
| Installation | Connection of digital sensors with Memosens-Protocol |
| Characteristic | Liquiline CM82 is a two-wire transmitter for all areas of process engineering |
| Design | Liquiline CM82 is optionally equipped with Bluetooth for comfortable remote commissioning via Smartphone/Tablets |
| Material | Housing, cover: Peek 151 Strain relief: EPDM Axial ring Peek 450 G |
| Dimension | Diameter: 18.95 mm (0.75 inch) Length: 114.7 mm (4.52 inch) |
| Connection | Connection of digital sensors with Memosens-Protocol |
| Ingress protection | IP67, IP68, NEMA Type 6 |
| Input | One channel transmitter |
| Output / communication | 4 to 20 mA, HART |
| Certificates, declarations and approvals | CE, CSA C/US GP |
The Liquiline Compact CM82 transmitter is small and lightweight and is used together with Memosens digital sensors. The slim housing is only 11 cm long and 2 cm wide and features a connection interface for directly mounting the sensor without any cable. Combined with a sensor, it can be installed in most assemblies for even more convenient installation. Via a unique secure Bluetooth connection, users can view all nearby CM82 measuring points on a tablet or smartphone and operate them conveniently from a distance.
Advantages
Simple operation: operate and commission the instrument using existing tablets and smartphones.
Fast and reliable: via a secure Bluetooth connection, users can view all hazardous measuring points or remotely operate hard-to-reach installation points.
Full benefit of all the advantages of Memosens digital sensor technology: Memosens digital sensors provide the most secure data transmission, the highest measured value stability and are very convenient to use.
Small installation space required: the two-wire device can be installed inside the assembly without its own power supply.
Suitable for all installation positions: the CM82 transmitter is always the right choice, even if the measuring point has to withstand dust, water vapor, rain, snow, heat or extreme cold directly.
Application areas
The Liquiline Compact CM82 can be used in all industries and their utilities and allows connection of all sensors with a blue Memosens plug.
pH electrodes
ORP electrodes
Conductivity sensors
Dissolved oxygen sensors
Disinfectant sensors
The loop-powered two-wire transmitter supports the following communication protocols and interfaces:
4...20 mA
HART
Bluetooth
With numerous international explosion protection approvals, the Liquiline CM82 can be used in hazardous areas, e.g. IECEx, ATEX and CSA.
Spare Parts & Accessories 6
6 spare parts · click to collapse
| Order code | Description | |
|---|---|---|
| 71401176 | Upgrade code: Bluetooth(provide serial number of device) CM82 | Details |
| 71367113 | Kit: Junction Box, non ExCE, CSA C/US GP CM72/CM82 | Details |
| CYP02D- | Memocheck CYP02DServicetool: sensor simulation Systems with Memosens functionality Double plug-head: 2 different sensor types Simulation: defined sensor status | Enquire |
| CYP03D- | Memocheck Simulator CYP03DHand held; continous measurement value simulation. Simulation of digital sensors;Memosens;all parameters Memosens sensors; inductive coupling fixed cable sensors; Memosens protocol Check of relays and control functions Complete loop check | Enquire |
| DIENST- | ServiceAttention: Please note the instructions for DIENST-F/T in the option text! | Enquire |
| RIA15- | F+ Loop-Powered Indicator RIA15单通道，无需单独供电 回路供电 5位液晶显示 可选HART通信 可选背光显示 棒状图 10%分辨率 | Enquire |
Configurator / Comparison
Accessories / Spare parts
A
A
Source:Endress+Hauserpublic information from the website
Measuring principle video
Click to playManuals & Documents 5
All documents for this modelCase Studies
Municipal Wastewater Treatment · multiparameter — Application Case
Application Context
the inlet, biological and outlet stages of a municipal plant is a typical Municipal Wastewater Treatment duty. The project started from multiparameter, focusing on monitoring several water parameters at one measuring point.
Process Constraints
effluent parameters drift and probes foul with sludge and biofilm, and high solids and corrosive fractions, with large diurnal flow swings only amplify it. The multiparameter specification must therefore cover configured by parameter set, mounting and cleaning needs.
Delivery Approach
Delivery was handled as the analyser range — selecting as part of a complete water-analysis system. Execution centred on configured by parameter set, mounting and cleaning needs, together with stable compliance with Grade 1A discharge limits and online data reporting.
Field Results
Operation shows the benefit clearly — one point replacing several single-parameter units, saving capex and upkeep, with confidence in this measuring point improving markedly.
Food & Beverage · multiparameter — Application Case
Customer Profile
The typical setting in Food & Beverage is dosing, pasteurising, filling and CIP stages. The measuring point is multiparameter; the focus is monitoring several water parameters at one measuring point.
Key Difficulties
Conditions are syrups, dairy and beverages that scale easily, under strict hygienic requirements and, on top of that, frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles, which a standard configuration cannot handle for long. The design therefore starts with configured by parameter set, mounting and cleaning needs.
Implementation
The scope ran through the analyser range: selecting as part of a complete water-analysis system. Technically it hinges on configured by parameter set, mounting and cleaning needs, and on these requirements: food-safety and hygienic design per 3-A / EHEDG.
Customer Benefit
In practice this means one point replacing several single-parameter units, saving capex and upkeep, which cut the workload on the site maintenance team.
Chemical & Pharmaceutical · multiparameter — Application Case
Project Background
The project covers reactors, metering vessels and finished-product tanks. The work centres on multiparameter and the core task is monitoring several water parameters at one measuring point.
Operating Challenges
The medium and duty are characterised by highly corrosive media with solvents and crystallisation, partly in explosive atmospheres, and corrosion plus Ex protection shortens instrument life and makes downtime costly. So multiparameter cannot be specified generically — it calls for configured by parameter set, mounting and cleaning needs.
Solution
The Ainstru engineering team worked through the analyser range: selecting as part of a complete water-analysis system. The configuration involves configured by parameter set, mounting and cleaning needs, with these requirements in view: Ex certification and GMP traceability of records.
Results
Since start-up the system has run steadily; the practical result is one point replacing several single-parameter units, saving capex and upkeep.
Power & Energy · multiparameter — Application Case
Project Overview
The site is boiler feedwater, turbine condensate and FGD/DeNOx systems. The customer wanted multiparameter properly configured on the existing plant, with the aim of monitoring several water parameters at one measuring point.
Technical Challenges
What actually causes trouble is high temperature and pressure with both steam and saline water, and drift under high temperature and pressure, with very costly unplanned outages. All of this means the multiparameter configuration has to involve configured by parameter set, mounting and cleaning needs.
Configuration
Supply and installation were organised through the analyser range: selecting as part of a complete water-analysis system. On site this meant configured by parameter set, mounting and cleaning needs, checked line by line against: compliance with power-industry codes and unit availability targets.
Performance
After commissioning the outcome is one point replacing several single-parameter units, saving capex and upkeep, and the readings are now used for process tuning.
Related Products
Endress+HauserLiquiline CM442
Endress+HauserLiquiline M CM42
Endress+HauserLiquiline CM14
Endress+HauserLiquiline CM442R
Endress+HauserLiquiline CM44P
Endress+HauserMulti-parameter transmitter
Endress+HauserLiquiline CM448
Endress+Hauser