Technical Data
ComparepH
| Measuring Principle | |
| Application | - Special applications with high requirements with regard to accuracy and speed.- non-glass, break-proof- Low temperatures- Rapidly changing composition of media.- highly clogging media.- Low conductivities |
| Characteristic | Ion sensitive field effect transistor (Isfet)-Technology.- Overhead installation- rapid response at low temperature.- lower amount of maintenance required than with glass.- 3A |
| Measuring range | pH 0-14 |
| Measuring principle | - Ceramic diaphragm.- Liquid lead |
| Design | All shaft lengths with temperature sensor |
| Material | Peek / metal oxide / Ceramic / EPDM |
| Dimension | Diameter : 12mm (0.47 inch)Shaft length : 120,225,360,425mm (4.72/8.86/14.2/16.7 inch) |
| Process temperature | -15°C ... 135°C (5°F - 275°F) |
| Process pressure | max. 10bar/100°C (145 psi/212°F) |
| Temperature sensor | Optional with integrated Pt1000 |
| Ex certification | ATEX FM |
| Connection | Contactless, inductive, digitale connection head with Memosens-Technology |
| Ingress protection | IP68 |
The Tophit CPS441D is a high-performance digital electrode for measuring media such as low-conductivity and high-concentration organic solvents. Even in applications with rapidly changing medium composition, the electrode’s fast response ensures high process safety. Its non-breakable sensor shaft ensures medium safety. Using Memosens digital technology, the CPS441D offers maximum process and data integrity and is easy to operate. The electrode is corrosion-resistant and moisture-proof and can be calibrated in the laboratory and used for preventive maintenance.
Advantages
Resistant to breakage and cracking, increasing measurement safety
Continuous KCl electrolyte replenishment and a separate reference lead give the electrode anti-poisoning properties
Suitable for disinfection processes
Long calibration intervals and low maintenance
Non-contact inductive signal transmission ensures maximum process safety
Stores sensor characteristic data for simple operation
Reduces process downtime, extends sensor service life and lowers operating costs
Application areas
For measuring high-concentration organic solvents or low-conductivity media:
Pressurized version of the electrode for measuring precipitants and dispersants in the chemical industry
Power plants, e.g. boiler feedwater
Life sciences, e.g. water for injection
Certified to 3A, ATEX, FM and CSA, for use in hygienic measuring applications or hazardous areas
Configurator / Comparison
Accessories / Spare parts
A
A
Measuring principle video
Click to playManuals & Documents 6
All documents for this model6 documents · click to expand
Case Studies
Municipal Wastewater Treatment · PH — Application Case
Application Context
the inlet, biological and outlet stages of a municipal plant is a typical Municipal Wastewater Treatment duty. The project started from PH, focusing on continuous pH monitoring for neutralisation and compliance control.
Process Constraints
effluent parameters drift and probes foul with sludge and biofilm, and high solids and corrosive fractions, with large diurnal flow swings only amplify it. The PH specification must therefore cover choosing glass or ISFET sensors by temperature, fluoride content and pressure.
Delivery Approach
Delivery was handled as the analyser range — selecting as part of a complete water-analysis system. Execution centred on choosing glass or ISFET sensors by temperature, fluoride content and pressure, together with stable compliance with Grade 1A discharge limits and online data reporting.
Field Results
Operation shows the benefit clearly — tighter dosing control and lower reagent consumption, with confidence in this measuring point improving markedly.
Food & Beverage · PH — Application Case
Customer Profile
The typical setting in Food & Beverage is dosing, pasteurising, filling and CIP stages. The measuring point is PH; the focus is continuous pH monitoring for neutralisation and compliance control.
Key Difficulties
Conditions are syrups, dairy and beverages that scale easily, under strict hygienic requirements and, on top of that, frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles, which a standard configuration cannot handle for long. The design therefore starts with choosing glass or ISFET sensors by temperature, fluoride content and pressure.
Implementation
The scope ran through the analyser range: selecting as part of a complete water-analysis system. Technically it hinges on choosing glass or ISFET sensors by temperature, fluoride content and pressure, and on these requirements: food-safety and hygienic design per 3-A / EHEDG.
Customer Benefit
In practice this means tighter dosing control and lower reagent consumption, which cut the workload on the site maintenance team.
Chemical & Pharmaceutical · PH — Application Case
Project Background
The project covers reactors, metering vessels and finished-product tanks. The work centres on PH and the core task is continuous pH monitoring for neutralisation and compliance control.
Operating Challenges
The medium and duty are characterised by highly corrosive media with solvents and crystallisation, partly in explosive atmospheres, and corrosion plus Ex protection shortens instrument life and makes downtime costly. So PH cannot be specified generically — it calls for choosing glass or ISFET sensors by temperature, fluoride content and pressure.
Solution
The Ainstru engineering team worked through the analyser range: selecting as part of a complete water-analysis system. The configuration involves choosing glass or ISFET sensors by temperature, fluoride content and pressure, with these requirements in view: Ex certification and GMP traceability of records.
Results
Since start-up the system has run steadily; the practical result is tighter dosing control and lower reagent consumption.
Power & Energy · PH — Application Case
Project Overview
The site is boiler feedwater, turbine condensate and FGD/DeNOx systems. The customer wanted PH properly configured on the existing plant, with the aim of continuous pH monitoring for neutralisation and compliance control.
Technical Challenges
What actually causes trouble is high temperature and pressure with both steam and saline water, and drift under high temperature and pressure, with very costly unplanned outages. All of this means the PH configuration has to involve choosing glass or ISFET sensors by temperature, fluoride content and pressure.
Configuration
Supply and installation were organised through the analyser range: selecting as part of a complete water-analysis system. On site this meant choosing glass or ISFET sensors by temperature, fluoride content and pressure, checked line by line against: compliance with power-industry codes and unit availability targets.
Performance
After commissioning the outcome is tighter dosing control and lower reagent consumption, and the readings are now used for process tuning.
Related Products
Endress+HauserOrbisint CPS11D Memosens
Endress+HauserLiquisys M CPM223
Endress+HauserMemosens CPS11E
Endress+HauserOrbipac CPF81
Endress+HauserMeas. cable CYK10 Memosens
Endress+HauserLiquisys M CPM253
Endress+HauserCeragel CPS71D Memosens
Endress+Hauser