Product family：
Deltabar M PMD55
Differential pressure transmitterIn Stock (2)
Deltabar M PMD55；Approval ATEX II 3G Ex ec IIC T6；Output 4-20mA HART；Display, Operation W/o LCD, push button on electronics；Housing F30 Alu；Electrical Connection Thread M20, IP66/67 NEMA4X/6P；Nominal
Order Code：PMD55-BD22AB77LGJHAJA1J+P5
Name：Deltabar M PMD55
Configuration
| Code | Name | Order | Specification |
|---|---|---|---|
| 010 | Approval | BD | ATEX II 3G Ex ec IIC T6 |
| 020 | Output | 2 | 4-20mA HART |
| 030 | Display, Operation | 2 | W/o LCD, push button on electronics |
| 040 | Housing | A | F30 Alu |
| 050 | Electrical Connection | B | Thread M20, IP66/67 NEMA4X/6P |
| 060 | Nominal Pressure PN | 7 | 160bar/16MPa/2400psi |
| 070 | Sensor Nominal Value | 7L | 16bar/1.6MPa/240psi |
| 080 | Reference Accuracy | G | Standard |
| 090 | Calibration; Unit | J | Customised Pressure; see additional spec. |
| 110 | Process Connection | HAJ | NPT1/4-18 IEC61518 UNF7/16-20, 316L, V1 Installation impulse line vertical Alignment 90deg |
| 170 | Membrane Material | A | 316L |
| 180 | Fill Fluid | 1 | Silicone oil |
| 190 | Seal | J | EPDM |
| 620 | Accessory Enclosed | P5 | 5 valve manifold 316L, see additional spec. |
Configuration Explained
This is a PMD55 differential pressure transmitter, common model, economical, with ATEX 3G increased safety approval, can be used in Zone 2, with 4-20mA HART output, no LCD display, push button operation only, aluminium housing, IP66/67, static pressure 160 bar, differential pressure range 16 bar, 316L diaphragm with silicone oil filling, EPDM seal, with 5-valve manifold, suitable for differential pressure measurement of high pressure lines.