Product family：
Cerabar PMP51B
Cerabar PMP51BIn Stock (4)
Cerabar PMP51B；Approval Non-hazardous area；Output 2-wire 4-20mA HART；Display/Operation Segment display w/o buttons；Housing/Material Single compartment; Alu, coated；Electrical Connection Gland M20, plastic, IP66/68 NEMA Type 4X/6P；Pressure Type Gauge；Application Standard；Diaphragm Seal Type W/o；Sensor Range 40bar/4MPa/600psi；Calibration/Unit Sensor range; kPa/MPa；Process Connection, Sealing Surface Thread ISO228, G, flush mount；Process Connection G1/2 DIN3852, 316L, flush moun
Order Code：PMP51B-AABACBA6AA3SCI2WJJA1+VD
Name：Cerabar PMP51B
Configuration
| Code | Name | Order | Specification |
|---|---|---|---|
| 010 | Approval | AA | Non-hazardous area |
| 020 | Output | BA | 2-wire 4-20mA HART |
| 030 | Display; Operation | C | Segment display w/o buttons |
| 040 | Housing; Material | B | Single compartment; Alu, coated |
| 050 | Electrical Connection | A | Gland M20, plastic, IP66/68 NEMA Type 4X/6P |
| 055 | Pressure Type | 6 | Gauge |
| 060 | Application | A | Standard |
| 065 | Diaphragm Seal Type | A | W/o |
| 075 | Sensor Range | 3S | 40bar/4MPa/600psi |
| 090 | Calibration; Unit | C | Sensor range; kPa/MPa |
| 105 | Process Connection, Sealing Surface | I2 | Thread ISO228, G, flush mount |
| 110 | Process Connection | WJJ | G1/2 DIN3852, 316L, flush mount |
| 170 | Membrane Material; Application | A | 316L; standard |
| 180 | Fill Fluid | 1 | Silicone oil, standard |
| 660 | Regional Device Adaption | VD | China |
