MCS300P HW can monitor up to 6 gas components simultaneously
Advantages
-
Low cost, automatic adjustment without test gas
-
Easy remote monitoring and maintenance through integration into existing networks
-
Automatic control of the complete measuring and sampling system
-
Reduced maintenance costs and reliable measurement results through thermal measurement technology
-
SCP3000 connected to a sampling probe, also suitable for use under high dust loads and high temperatures
-
Shortened response time through high sample gas flow rate
Application
The MCS300P HW thermal extraction analysis system is used for gas measurement. It can be used to monitor IR or VIS active components in different measuring ranges, and to control combustion processes and exhaust gas purification equipment. The heated system components prevent temperatures from falling below the dew point of water and acids. This reduces maintenance requirements and gives the system high reliability and long-term stability, even under harsh and demanding operating conditions. Thanks to the automatic calibration unit, the innovative operating concept and modern communication protocols, the MCS300P HW can be quickly and easily connected to the local process control system.
-
Monitoring of waste or sewage sludge incineration in air quality control systems
-
Control of scrubbers in exhaust gas purification equipment for dosage adjustment
-
Direct measurement at the rotary kiln inlet in the cement industry
Overview:
-
Simultaneous measurement of up to 6 components plus O2
-
Temperature of system components up to 200 °C
-
Automatic switching between up to 3 measuring points (optional)
-
Automatic adjustment for zero point and reference point testing
-
Integrated calibration unit without test gas (optional)
-
Flexible I/O module system
Source:Endress+Hauserwebsite public information
Case Studies
Municipal Wastewater Treatment · Gas Analysis — Application Case
Project Overview
The site is the inlet, biological and outlet stages of a municipal plant. The customer wanted Gas Analysis properly configured on the existing plant, with the aim of continuous analysis of target components in flue or process gas.
Technical Challenges
What actually causes trouble is high solids and corrosive fractions, with large diurnal flow swings, and effluent parameters drift and probes foul with sludge and biofilm. All of this means the Gas Analysis configuration has to involve choosing the analysis principle by range, background gas and conditioning.
Configuration
Supply and installation were organised through the analyser range: selecting as part of a complete water-analysis system. On site this meant choosing the analysis principle by range, background gas and conditioning, checked line by line against: stable compliance with Grade 1A discharge limits and online data reporting.
Performance
After commissioning the outcome is optimised combustion, cutting both fuel use and emissions, and the readings are now used for process tuning.
Food & Beverage · Gas Analysis — Application Case
Site Conditions
This is a Food & Beverage customer whose plant is at dosing, pasteurising, filling and CIP stages. The main task was continuous analysis of target components in flue or process gas.
The Problem
The difficulty lies in syrups, dairy and beverages that scale easily, under strict hygienic requirements; at the same time frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles. Specification therefore means choosing the analysis principle by range, background gas and conditioning.
What We Did
We took a analyser range approach — selecting as part of a complete water-analysis system. Delivery was built around choosing the analysis principle by range, background gas and conditioning, with point-by-point checks on: food-safety and hygienic design per 3-A / EHEDG.
Operating Outcome
In service the system performs as intended — optimised combustion, cutting both fuel use and emissions, with routine maintenance falling noticeably.
Chemical & Pharmaceutical · Gas Analysis — Application Case
Application Context
reactors, metering vessels and finished-product tanks is a typical Chemical & Pharmaceutical duty. The project started from Gas Analysis, focusing on continuous analysis of target components in flue or process gas.
Process Constraints
corrosion plus Ex protection shortens instrument life and makes downtime costly, and highly corrosive media with solvents and crystallisation, partly in explosive atmospheres only amplify it. The Gas Analysis specification must therefore cover choosing the analysis principle by range, background gas and conditioning.
Delivery Approach
Delivery was handled as the analyser range — selecting as part of a complete water-analysis system. Execution centred on choosing the analysis principle by range, background gas and conditioning, together with Ex certification and GMP traceability of records.
Field Results
Operation shows the benefit clearly — optimised combustion, cutting both fuel use and emissions, with confidence in this measuring point improving markedly.
Power & Energy · Gas Analysis — Application Case
Customer Profile
The typical setting in Power & Energy is boiler feedwater, turbine condensate and FGD/DeNOx systems. The measuring point is Gas Analysis; the focus is continuous analysis of target components in flue or process gas.
Key Difficulties
Conditions are high temperature and pressure with both steam and saline water and, on top of that, drift under high temperature and pressure, with very costly unplanned outages, which a standard configuration cannot handle for long. The design therefore starts with choosing the analysis principle by range, background gas and conditioning.
Implementation
The scope ran through the analyser range: selecting as part of a complete water-analysis system. Technically it hinges on choosing the analysis principle by range, background gas and conditioning, and on these requirements: compliance with power-industry codes and unit availability targets.
Customer Benefit
In practice this means optimised combustion, cutting both fuel use and emissions, which cut the workload on the site maintenance team.
