Technical Data
CompareLiquids
| Measuring Principle | Electromagnetic |
| Product headline | Flowmeter with hygienic design, highest repeatability and an ultra-compact sensor. For demanding dosing and filling applications. |
| Sensor features | High process safety – high measuring accuracy and repeatability in shortest filling time. Energy‐saving flow measurement – no pressure loss due to cross section constriction. Maintenance‐free – no moving parts. Wetted materials CIP, SIP cleanable. Nominal diameter: DN 4 to 25 (¹⁄₈ to 1"). Measuring device conform to FDA. |
| Transmitter features | Versatile and time-saving wiring – plug connector. Industry-optimized – ultra-compact design. For hygienic requirements – stainless steel housing. Pulse/frequency/switch output, Modbus RS485. Custody transfer approvals (MID, NTEP). Excellent, easily cleanable transmitter. |
| Nominal diameter range | DN 4 (⁵⁄₃₂"), 8 (⁵⁄₁₆"), 15 (½"), 25 (1") |
| Wetted materials | Liner: PFA Electrodes: 1.4435 (316L); Alloy C22, 2.4602 (UNS N06022), Tantalum, Platinum |
| Measured variables | Volume flow |
| Max. measurement error | ±0.25 % o.r. ± 1 to 4 m/s (3.3 to 13 ft/s) ±0.5 % o.r. ± 1 mm/s (0.04 in/s) ±5 % o.r. |
| Measuring range | 0.14 to 1.66 l/s (0.035 to 0.44 gal/s) |
| Max. process pressure | PN 16 |
| Medium temperature range | Seal material EPDM: –20 to +130 °C (–4 to +266 °F) Seal material Silicone: –20 to +130 °C (–4 to +266 °F) Seal material Viton: 0 to +150 °C (+32 to +302 °F) |
| Ambient temperature range | –40 to +60 °C (–40 to +140 °F) |
| Sensor housing material | 1.4308 (304) |
| Transmitter housing material | 1.4308 (304) |
| Degree of protection | IP66/67, type 4X enclosure |
| Display/Operation | No local Operation Configuration via operating tools possible |
| Outputs | Pulse/frequency/switch output (passive) |
| Inputs | None |
| Digital communication | Modbus RS485 |
| Power supply | DC 20 to 30 V |
| Hazardous area approvals | ATEX, IECEx, cCSAus |
| Product safety | CE |
| Metrological approvals and certificates | Calibration performed on accredited calibration facilities (acc.to ISO/IEC 17025) NTEP |
| Material certificates | 3.1 material |
| Hygienic approvals and certificates | Sanitary approval: 3-A, EHEDG, seals acc. to FDA |
Dosimag is designed specifically for filling and bottling of conductive liquids and measures the volume flow directly. Designed for compact application spaces, Dosimag is the preferred product for system integrators, skid manufacturers and equipment manufacturers.
Advantages
High process safety - high measuring accuracy and repeatability within the shortest filling times
Energy-efficient flow measurement - cross-section identical to the pipe, no pressure loss
Maintenance-free - no moving parts
Versatile and convenient wiring - plug connection
Industry-optimized - ultra-compact design
Hygienic - stainless steel housing
Application
The bidirectional measuring principle is not affected by pressure, density, temperature or viscosity
Suitable for batching and filling applications
Device properties
Wetted materials suitable for CIP and SIP cleaning
Nominal diameter: DN 4 to 25 (1/8 to 1")
Measuring device complies with FDA
Pulse/frequency/switch output, Modbus RS485
Custody transfer approval (MID, NTEP)
Excellent transmitter functions, easy to clean
Spare Parts & Accessories 16
16 spare parts · click to collapse
| Order code | Description | |
|---|---|---|
| 5BXXX- | *** canned electromagnetic flowmeter transmitter, OEM type 5BXXX | Enquire |
| 50102857 | Sensor/Transmitter Gasket | Details |
| 50106443 | FXA commissioning toolFXA service adapter Batchline packed | Details |
| 71035809 | 5BH Commissioning Cable, Y-Type Cable | Details |
| 50107167 | Adapter RSE4 8-pole -> 4-pole, 4-wire | Details |
| 50107168 | adapter | Details |
| 50107169 | Adapter RSE8 8-pin -> 8-pin, 5-wire | Details |
| 50107895 | Connecting cable RKWTN8-56/5 P92, 5 mCaution: Please note that this cable is not approved for use in ATEX Zone 2 or UL Class 1 Division 2 areas. This cable is not shielded. Use a shielded twisted pair cable for Modbus RS485 applications. | Details |
| 71306290 | Terminator resistor kit CAN-M12 5P A-cod | Details |
| 51516983 | Communication interface FXA291Serial USB Computer Interface Technical Data: - USB Version1.1 or higher - Power supply via USB - IP51; NEMA/Typ 3 - Ambient temperature: -20....+60oC - Ex: II(2) G (EEx ia) II C - ATEX: BVS 05 ATEX E 095 Scope of deliovery: Commubox FXA 291 MS Windows USB driver Device is submitted for CSA/FM application. The device may not be modified and may be used with intrinsically safe circuits with corresponding characteristics only (see safety certificate). | Details |
| 5BH- | Dosimag, 5BHElectromagnetic flowmeter for filling applications (compact version) PFA measuring tube lining Housing in stainless steel | Enquire |
| DKH- | Promag H Installation Kit DKHA set includes 2 process connections and 2 seals. | Enquire |
| DK5G- | Seal ring assembly | Enquire |
| DK5HW- | Welding Assembly DK5HW | Enquire |
| DK5HA- | Adapter assembly DK5HAReplacement of sensor Promag A or Promag H DN 25. The set includes 2 adapters and 2 seals. For dimensions refer to the technical documentation. | Enquire |
| FXA193- | *** Communication Interface FXA193The service interface connects the service port of Proline and ToF devices with the serial interface RS 232C (9 pin.) of a personal computer. Contents of delivery: - Serviceinterface with RS 232C connection cable (9 pin.) - FXA "USB" cable, the additional power supply for FXA193 from USB-port of the PC. - Service Softw.ToF Tool-Fieldtool Package | Enquire |
Configurator / Comparison
Source:Endress+Hauserwebsite public information
Measuring principle video
Click to playCase Studies
Municipal Wastewater Treatment · Electromagnetic flow meter — Application Case
Site Conditions
This is a Municipal Wastewater Treatment customer whose plant is at the inlet, biological and outlet stages of a municipal plant. The main task was volumetric flow of conductive liquids.
The Problem
The difficulty lies in high solids and corrosive fractions, with large diurnal flow swings; at the same time effluent parameters drift and probes foul with sludge and biofilm. Specification therefore means choosing liner and electrode pairing by conductivity, solids and abrasion.
What We Did
We took a flow range approach — flow solution matched to line size, medium and range. Delivery was built around choosing liner and electrode pairing by conductivity, solids and abrasion, with point-by-point checks on: stable compliance with Grade 1A discharge limits and online data reporting.
Operating Outcome
In service the system performs as intended — no obstruction, so pressure loss is minimal and upkeep low, with routine maintenance falling noticeably.
Food & Beverage · Electromagnetic flow meter — Application Case
Application Context
dosing, pasteurising, filling and CIP stages is a typical Food & Beverage duty. The project started from Electromagnetic flow meter, focusing on volumetric flow of conductive liquids.
Process Constraints
frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles, and syrups, dairy and beverages that scale easily, under strict hygienic requirements only amplify it. The Electromagnetic flow meter specification must therefore cover choosing liner and electrode pairing by conductivity, solids and abrasion.
Delivery Approach
Delivery was handled as the flow range — flow solution matched to line size, medium and range. Execution centred on choosing liner and electrode pairing by conductivity, solids and abrasion, together with food-safety and hygienic design per 3-A / EHEDG.
Field Results
Operation shows the benefit clearly — no obstruction, so pressure loss is minimal and upkeep low, with confidence in this measuring point improving markedly.
Chemical & Pharmaceutical · Electromagnetic flow meter — Application Case
Customer Profile
The typical setting in Chemical & Pharmaceutical is reactors, metering vessels and finished-product tanks. The measuring point is Electromagnetic flow meter; the focus is volumetric flow of conductive liquids.
Key Difficulties
Conditions are highly corrosive media with solvents and crystallisation, partly in explosive atmospheres and, on top of that, corrosion plus Ex protection shortens instrument life and makes downtime costly, which a standard configuration cannot handle for long. The design therefore starts with choosing liner and electrode pairing by conductivity, solids and abrasion.
Implementation
The scope ran through the flow range: flow solution matched to line size, medium and range. Technically it hinges on choosing liner and electrode pairing by conductivity, solids and abrasion, and on these requirements: Ex certification and GMP traceability of records.
Customer Benefit
In practice this means no obstruction, so pressure loss is minimal and upkeep low, which cut the workload on the site maintenance team.
Power & Energy · Electromagnetic flow meter — Application Case
Project Background
The project covers boiler feedwater, turbine condensate and FGD/DeNOx systems. The work centres on Electromagnetic flow meter and the core task is volumetric flow of conductive liquids.
Operating Challenges
The medium and duty are characterised by high temperature and pressure with both steam and saline water, and drift under high temperature and pressure, with very costly unplanned outages. So Electromagnetic flow meter cannot be specified generically — it calls for choosing liner and electrode pairing by conductivity, solids and abrasion.
Solution
The Ainstru engineering team worked through the flow range: flow solution matched to line size, medium and range. The configuration involves choosing liner and electrode pairing by conductivity, solids and abrasion, with these requirements in view: compliance with power-industry codes and unit availability targets.
Results
Since start-up the system has run steadily; the practical result is no obstruction, so pressure loss is minimal and upkeep low.
Related Products
Endress+HauserElectromagnetic flowmeter
Endress+HauserElectromagnetic flowmeter 10
Endress+HauserElectromagnetic flowmeter
Endress+HauserElectromagnetic flowmeter
Endress+HauserBattery-powered electromagnetic flowmeter
Endress+HauserMAGPHANT
Endress+HauserElectromagnetic flowmeter
Endress+Hauser