The Connect Sensor FXA30B is a fully integrated battery-powered gateway whose inputs can be connected to a variety of field devices. The FXA30B can operate under harsh conditions and is the ideal choice for applications where no power supply is available. It can power field devices, and data can be viewed via the SupplyCare Hosting cloud.
Benefits
-
Desktop display of level, flow and pressure, without worrying about the installation location and power supply to a remote gateway
-
Especially suitable for typical three-times-daily inventory measurement
-
Easy connection to field devices
-
Cellular service can be bound as required
-
Flexible battery or DC power supply in remote areas
Application areas
-
Battery-powered remote monitoring unit for analog or digital field devices connected via mobile communication.
-
External, configurable power output eliminates the need for a sensor power supply
-
Measurement and transmission cycle setting
-
Wide temperature range of the protective housing makes it ideal for use in various environments
-
Four 4...20 mA input channels, one Modbus serial channel for up to 4 devices, one digital input for waking on special conditions
Source: public information from the Endress+Hauser website
Spare Parts & Accessories 4
4 spare parts · click to collapse
| Order code | Description | |
|---|---|---|
| 71329969 | Lithium thionyl chloride battery FXA30Consists of: Lithium-thionyl chloride (Li-SOCL2). Type: ER34615 7,2V 14Ah. Non-rechargeable. Usage: FXA30. Delivered with connector. Hazards Id. UN38.3. Batteries are considered hazardous goods and may be charged by import taxes depending on the country of delivery. | Details |
| 71329987 | Mobile antenna for use with FXA30, supports 3G/4G/LTE networks, swivel connectorFrequencies: 698-960/1710-2170/2500- 2700Mhz. Nominal impedance: 50 ohm. VSWR: 2.5:1. Polarization: linear vertical. Radiation pattern: omni. Power rating: 3 watt. Gain: 0 min-2 max. Weight: 1.66oz (47g). Height x width: 228mm x 25mm (9" x 1"). Operating temperature [oC]: -30 to +70. Usage: FXA30, LTE and GSM. | Details |
| 71327395 | Fixed Antenna: LTE, GSM, UMTS, WLANFixed antenna for mounting on vertical surfaces. Cable length: 3m. Application: LTE 800MHz, LTE 2.6GHz, GSM 900/1800, UMTS, WLAN 2.4 GHz (WiMAX, WiFi). Usage: FXA30, FXA42. Indoor and outdoor use. Mounting via bracket. Omnidirectional characteristic. Radiator protected by a plastic tube. HF-cable connected directly to antenna. 10cm clearance between antenna by 15dB isolation. | Details |
| 71336975 | FXA30 Mounting KitFor wall mounting. Consists of: 4x small brackets. 4x screws. Usage: FXA30. | Details |
Configurator / Comparison
Case Studies
Municipal Wastewater Treatment · Gateways and modems — Application Case
Project Background
The project covers the inlet, biological and outlet stages of a municipal plant. The work centres on Gateways and modems and the core task is converting field data into remote transmission channels.
Operating Challenges
The medium and duty are characterised by high solids and corrosive fractions, with large diurnal flow swings, and effluent parameters drift and probes foul with sludge and biofilm. So Gateways and modems cannot be specified generically — it calls for configured by protocol, tag count and carrier network conditions.
Solution
The Ainstru engineering team worked through the system components range: supplying as a full cabinet and signal-chain configuration. The configuration involves configured by protocol, tag count and carrier network conditions, with these requirements in view: stable compliance with Grade 1A discharge limits and online data reporting.
Results
Since start-up the system has run steadily; the practical result is remote sites can report back, making unattended operation possible.
Food & Beverage · Gateways and modems — Application Case
Project Overview
The site is dosing, pasteurising, filling and CIP stages. The customer wanted Gateways and modems properly configured on the existing plant, with the aim of converting field data into remote transmission channels.
Technical Challenges
What actually causes trouble is syrups, dairy and beverages that scale easily, under strict hygienic requirements, and frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles. All of this means the Gateways and modems configuration has to involve configured by protocol, tag count and carrier network conditions.
Configuration
Supply and installation were organised through the system components range: supplying as a full cabinet and signal-chain configuration. On site this meant configured by protocol, tag count and carrier network conditions, checked line by line against: food-safety and hygienic design per 3-A / EHEDG.
Performance
After commissioning the outcome is remote sites can report back, making unattended operation possible, and the readings are now used for process tuning.
Chemical & Pharmaceutical · Gateways and modems — Application Case
Site Conditions
This is a Chemical & Pharmaceutical customer whose plant is at reactors, metering vessels and finished-product tanks. The main task was converting field data into remote transmission channels.
The Problem
The difficulty lies in highly corrosive media with solvents and crystallisation, partly in explosive atmospheres; at the same time corrosion plus Ex protection shortens instrument life and makes downtime costly. Specification therefore means configured by protocol, tag count and carrier network conditions.
What We Did
We took a system components range approach — supplying as a full cabinet and signal-chain configuration. Delivery was built around configured by protocol, tag count and carrier network conditions, with point-by-point checks on: Ex certification and GMP traceability of records.
Operating Outcome
In service the system performs as intended — remote sites can report back, making unattended operation possible, with routine maintenance falling noticeably.
Power & Energy · Gateways and modems — Application Case
Application Context
boiler feedwater, turbine condensate and FGD/DeNOx systems is a typical Power & Energy duty. The project started from Gateways and modems, focusing on converting field data into remote transmission channels.
Process Constraints
drift under high temperature and pressure, with very costly unplanned outages, and high temperature and pressure with both steam and saline water only amplify it. The Gateways and modems specification must therefore cover configured by protocol, tag count and carrier network conditions.
Delivery Approach
Delivery was handled as the system components range — supplying as a full cabinet and signal-chain configuration. Execution centred on configured by protocol, tag count and carrier network conditions, together with compliance with power-industry codes and unit availability targets.
Field Results
Operation shows the benefit clearly — remote sites can report back, making unattended operation possible, with confidence in this measuring point improving markedly.
Related Products
Endress+HauserWirelessHART Fieldgate SWG70
Endress+HauserFieldPort SFP20
Endress+HauserCommubox FXA195
Endress+HauserWirelessHART Adapter SWA70
Endress+HauserSmart Ethernet gateway
Endress+HauserFieldgate FXA42
VEGAVEGA Tools app
Endress+Hauser