Technical Data
CompareConductivity
| Measuring Principle | Conductive |
| Application | Simulation of freely configurable values for qualification of digital data transmission of analysis measuring points with Memosens protocol Multiparameter, main- and secondary values |
| Installation | Temporary connection via Memosens cable with inductive coupling |
| Measuring range | Ranges like the simulated sensors |
| Dimension | Handheld: 94 x 236 x 25 to 40 mm 3.7 x 9.29 x 0.98 to 1.57 inch |
| Process temperature | Umgebungstemperatur: –20 to 50 °C (–4 to 120 °F) |
| Ex certification | ATEX, IECEx, CSA |
| Connection | Battery powered |
| Ingress protection | IP65 |
Disinfection
| Measuring Principle | Free chlorine |
| Application | Simulation of freely configurable values for qualification of digital data transmission of analysis measuring points with Memosens protocol Multiparameter, main- and secondary values |
| Measuring range | Ranges like the simulated sensors |
| Dimension | Handheld: 94 x 236 x 25 to 40 mm 3.7 x 9.29 x 0.98 to 1.57 inch |
| Process temperature | Ambient temperature: –20 to 50 °C (–4 to 120 °F) |
| Connection | Battery powered |
ORP / Redox
| Measuring Principle | Sensor ORP / Redox |
| Application | Simulation of freely configurable values for qualification of digital data transmission of analysis measuring points with Memosens protocol Multiparameter, main- and secondary values |
| Installation | Temporary connection via Memosens cable with inductive coupling |
| Measuring range | Ranges like the simulated sensors |
| Dimension | Handheld: 94 x 236 x 25 to 40 mm 3.7 x 9.29 x 0.98 to 1.57 inch |
| Process temperature | Ambient temperature: –20 to 50 °C (–4 to 120 °F) |
| Ex certification | ATEX, IECEx, CSA |
| Connection | Battery powered |
| Ingress protection | IP65 |
Oxygen
| Measuring Principle | Amperometric oxygen measurement |
| Application | Simulation of freely configurable values for qualification of digital data transmission of analysis measuring points with Memosens protocol Multiparameter, main- and secondary values |
| Installation | Temporary connection via Memosens cable with inductive coupling |
| Measuring range | Ranges like the simulated sensors |
| Dimension | Handheld: 94 x 236 x 25 to 40 mm 3.7 x 9.29 x 0.98 to 1.57 inch |
| Process temperature | Ambient temperature: –20 to 50 °C (–4 to 120 °F) |
| Ex certification | ATEX: Ex ia, zone 0 |
| Connection | Battery powered |
| Ingress protection | IP65 |
Turbidity
| Measuring Principle | Single beam scattered light |
| Application | Simulation of freely configurable values for qualification of digital data transmission of analysis measuring points with Memosens protocol. Multiparameter, main- and secondary values |
| Installation | Temporary connection via Memosens cable with inductive coupling. |
| Measuring range | Ranges like the simulated sensors. |
| Dimension | Handheld, 9,5 x 23,5 x 3,5 cm |
| Process temperature | -20...55°C ambient temperature |
| Ex certification | ATEX: Ex ia, zone 1 |
| Connection | Battery powered |
| Ingress protection | IP65 |
pH
| Measuring Principle | Potentiometric |
| Application | Simulation of freely configurable values for qualification of digital data transmission of analysis measuring points with Memosens protocol Multiparameter, main- and secondary values |
| Installation | Temporary connection via Memosens cable with inductive coupling |
| Measuring range | Ranges like the simulated sensors |
| Dimension | Handheld: 94 x 236 x 40 mm 3.7 x 9.29 x 1.57 inch |
| Process temperature | Ambient temperature: –20 to 50 °C (–4 to 120 °F) |
| Ex certification | ATEX, IECEx, CSA |
| Connection | Battery powered |
| Ingress protection | IP65 |
Memocheck Sim CYP03D is a flexible service and certification tool for all applications. It simulates definable values to support your installation, debugging, and troubleshooting. Memocheck Sim can replace the sensor, check the complete measurement loop from the cable connector to the process control system, and verify that the transmission of the measured value is zero error. The Memocheck Sim with quality certification is selected to certify the entire measuring point.
advantage
Fast and reliable function check: freely definable measured values and amplitudes for flexibility in installation, commissioning, troubleshooting and factory certification
Suitable for controlled environments: Quality certification and traceable calibration certificates are available
Improve the safety of the measuring loop: check the complete measuring loop from the cable connector to the process control system
All parameters available in one tool: pH, ORP, conductivity, dissolved oxygen, residual chlorine, turbidity and nitrate and SAC
Explosion-proof certified for use in explosion-hazardous areas
Application areas
Factory Certification
Installation and commissioning
fault diagnosis
Accessories/Spare Parts
Source:Endress Hauserwebsite public information
Measuring principle video
Click to playSpare Parts & Accessories 2
Configurator / Comparison
Manuals & Documents 6
All documents for this model6 documents · click to expand
Memocheck Sim CYP03D 操作手册 Chinese
Memocheck Sim CYP03D Operating Instructions English
Memocheck CYP02D / Memocheck Sim CYP03D 技术资料 Chinese
技术资料 Memocheck Plus CYP01D Memocheck CYP02D Memocheck Sim CYP03D Chinese
Memocheck CYP02D / Memocheck Sim CYP03D Technical Information English
Technical Information Memocheck Plus CYP01D / Memocheck CYP02D / Memocheck Sim CYP03D English
Case Studies
Municipal Wastewater Treatment · multiparameter — Application Case
Application Context
the inlet, biological and outlet stages of a municipal plant is a typical Municipal Wastewater Treatment duty. The project started from multiparameter, focusing on monitoring several water parameters at one measuring point.
Process Constraints
effluent parameters drift and probes foul with sludge and biofilm, and high solids and corrosive fractions, with large diurnal flow swings only amplify it. The multiparameter specification must therefore cover configured by parameter set, mounting and cleaning needs.
Delivery Approach
Delivery was handled as the analyser range — selecting as part of a complete water-analysis system. Execution centred on configured by parameter set, mounting and cleaning needs, together with stable compliance with Grade 1A discharge limits and online data reporting.
Field Results
Operation shows the benefit clearly — one point replacing several single-parameter units, saving capex and upkeep, with confidence in this measuring point improving markedly.
Food & Beverage · multiparameter — Application Case
Customer Profile
The typical setting in Food & Beverage is dosing, pasteurising, filling and CIP stages. The measuring point is multiparameter; the focus is monitoring several water parameters at one measuring point.
Key Difficulties
Conditions are syrups, dairy and beverages that scale easily, under strict hygienic requirements and, on top of that, frequent cleaning demands instruments that withstand hot CIP/SIP caustic cycles, which a standard configuration cannot handle for long. The design therefore starts with configured by parameter set, mounting and cleaning needs.
Implementation
The scope ran through the analyser range: selecting as part of a complete water-analysis system. Technically it hinges on configured by parameter set, mounting and cleaning needs, and on these requirements: food-safety and hygienic design per 3-A / EHEDG.
Customer Benefit
In practice this means one point replacing several single-parameter units, saving capex and upkeep, which cut the workload on the site maintenance team.
Chemical & Pharmaceutical · multiparameter — Application Case
Project Background
The project covers reactors, metering vessels and finished-product tanks. The work centres on multiparameter and the core task is monitoring several water parameters at one measuring point.
Operating Challenges
The medium and duty are characterised by highly corrosive media with solvents and crystallisation, partly in explosive atmospheres, and corrosion plus Ex protection shortens instrument life and makes downtime costly. So multiparameter cannot be specified generically — it calls for configured by parameter set, mounting and cleaning needs.
Solution
The Ainstru engineering team worked through the analyser range: selecting as part of a complete water-analysis system. The configuration involves configured by parameter set, mounting and cleaning needs, with these requirements in view: Ex certification and GMP traceability of records.
Results
Since start-up the system has run steadily; the practical result is one point replacing several single-parameter units, saving capex and upkeep.
Power & Energy · multiparameter — Application Case
Project Overview
The site is boiler feedwater, turbine condensate and FGD/DeNOx systems. The customer wanted multiparameter properly configured on the existing plant, with the aim of monitoring several water parameters at one measuring point.
Technical Challenges
What actually causes trouble is high temperature and pressure with both steam and saline water, and drift under high temperature and pressure, with very costly unplanned outages. All of this means the multiparameter configuration has to involve configured by parameter set, mounting and cleaning needs.
Configuration
Supply and installation were organised through the analyser range: selecting as part of a complete water-analysis system. On site this meant configured by parameter set, mounting and cleaning needs, checked line by line against: compliance with power-industry codes and unit availability targets.
Performance
After commissioning the outcome is one point replacing several single-parameter units, saving capex and upkeep, and the readings are now used for process tuning.
Related Products
Endress+HauserLiquiline CM442
Endress+HauserLiquiline M CM42
Endress+HauserLiquiline CM14
Endress+HauserLiquiline Compact CM82
Endress+HauserLiquiline CM442R
Endress+HauserLiquiline CM44P
Endress+HauserMulti-parameter transmitter
Endress+Hauser