Instrumentation · Engineering · Package · PLC
0755-82221901 sales@ainstru.com

PMC11-AA1U1RBWWJA

PMC11-AA1U1RBWWJA
Product family: Cerabar PMC11
Cerabar PMC11
Endress+Hauser PMC11-AA1U1RBWWJA
Cerabar PMC11;Approval Non-hazardous area;Output 4-20mA;Electrical Connection Valve plug ISO4400 M16, IP65 NEMA Type 4X Encl.;Sensor Range 25bar/2.5MPa/375psi gauge, overload: 60bar/6MPa/900psi;Calibration/Unit Sensor range; mbar/bar;Process Connection Thread ISO228 G1/2, hole 11.4mm, 316L;Seal FKM

Order Code:PMC11-AA1U1RBWWJA

Name:Cerabar PMC11

Configuration

CodeNameOrderSpecification
010ApprovalAANon-hazardous area
020Output14-20mA
040Electrical ConnectionUValve plug ISO4400 M16, IP65 NEMA Type 4X Encl.
070Sensor Range1R25bar/2.5MPa/375psi gauge, overload: 60bar/6MPa/900psi
090Calibration; UnitBSensor range; mbar/bar
110Process ConnectionWWJThread ISO228 G1/2, hole 11.4mm, 316L
190SealAFKM

Configuration Explained

The Cerabar PMC11 is a gauge pressure transmitter for non-hazardous areas with a 4-20mA output. The process connection is an ISO228 G1/2 thread with an 11.4 mm bore in 316L stainless steel, sealed by an FKM gasket. Electrical connection is a Harting connector to ISO4400 M16 with IP65 (NEMA type 4X) protection. The overload limit is 25 bar (2.5 MPa / 375 psi), and calibration and display units follow the sensor range in mbar/bar. It suits pressure measurement in water treatment, power generation and general chemical service.

18 models · click to collapse