iTEMP TMT111,Transmitter DIN rail PCP
Technical Data
CompareTemperature transmitters
| Measuring Principle | |
| Input | 1 x RTD, TC, Ohm, mV |
| Output | 1 x analog 4...20 mA |
| Auxiliary power supply | 12...35 V DC (standard-version) 12...30 V DC (Ex-version) |
| Communication | pc-programmable |
| Installation | DIN rail |
| Accuracy | (Pt100, -50...200 °C) <= 0,2 K (Pt100, -58...392 °F) <= 0,4 °F |
| Galvanic isolation | yes |
| Certification | UL rec. Comp ATEX II2(1)G Ex ia IIC T4/T5/T6 FM+CSA IS, NI I/1+2/ABCD FM IS, NI I/1+2/ABCD CSA IS, NI I/1+2/ABCD |
Superior reliability, accuracy and long-term stability in the critical process stages of all industries. The configurable transmitter converts signals into not only resistance thermometer (RTD) and thermocouple (TC) signals, but also resistance and voltage signals. The standard output signal is 4...20 mA.
Fast and simple operation, visualization and maintenance using a commissioning tool on a PC. Space-saving DIN rail mounting in accordance with IEC 60715 (housing width: 12.6 mm)
Benefits
Fault signaling for sensor open circuit or short circuit, presettable in accordance with NAMUR NE43
UL-listed components in accordance with UL 3111-1
CSA general-purpose approval
Meets EMC requirements in accordance with NAMUR NE21
Explosion protection certificates: ATEX Ex ia, CSA IS, FM IS
2 kV electrical isolation (input/output)
Output simulation for fast and simple testing of the measuring loop
Application areas
PC-programmable (PCP) DIN rail temperature transmitter for converting various input signals into a 4...20 mA analog output signal
Can be connected to resistance thermometer (RTD), thermocouple (TC), resistance (Ω) and voltage (mV) signals
Device configuration via a PC with the configuration kit and ReadWin 2000 PC software
Installed on a TH35 DIN rail in accordance with IEC 60715
E+H product model configurator
Please enter the product model to configure
Product comparison
Please enter the product models to be compared in the input boxes below; up to three products can be compared
Technical information
Technical data
Documents/Manuals/Software
Accessories/Spare parts
Source: public information from the Endress+Hauser website
Case Studies
Municipal Wastewater Treatment — Wastewater Treatment Plant · Temperature Transmitter Application Case
Project Background
Municipal Wastewater Treatment customers at the Wastewater Treatment Plant stage have long faced the challenge of insufficient accuracy in effluent quality monitoring and instruments prone to contamination causing data drift, affecting compliance discharge, placing higher demands on the stability and measurement accuracy of Temperature Transmitter.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Temperature Transmitter for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Municipal Wastewater Treatment conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Food & Beverage — Food Production Line · Temperature Transmitter Application Case
Project Background
Food & Beverage customers at the Food Production Line stage have long faced the challenge of high hygienic measurement requirements, with inline instruments needing to withstand CIP/SIP cleaning while maintaining stable accuracy, placing higher demands on the stability and measurement accuracy of Temperature Transmitter.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Temperature Transmitter for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Food & Beverage conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Chemical & Pharmaceutical — Reactors and Storage Tanks · Temperature Transmitter Application Case
Project Background
Chemical & Pharmaceutical customers at the Reactors and Storage Tanks stage have long faced the challenge of highly corrosive media and complex conditions, requiring corrosion-resistant and explosion-proof instruments, placing higher demands on the stability and measurement accuracy of Temperature Transmitter.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Temperature Transmitter for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Chemical & Pharmaceutical conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Power & Energy — Power Plant Boiler and Turbine · Temperature Transmitter Application Case
Project Background
Power & Energy customers at the Power Plant Boiler and Turbine stage have long faced the challenge of unstable measurement under high temperature and pressure, with high maintenance and downtime costs, placing higher demands on the stability and measurement accuracy of Temperature Transmitter.
Solution
Based on the on-site conditions, the Ainstru technical team selected suitable Temperature Transmitter for the customer and delivered one-stop service covering selection, installation, commissioning and tuning.
Results
- Measurement accuracy and response speed significantly improved, with stable and reliable data;
- Instruments adapt to complex Power & Energy conditions, greatly reducing maintenance;
- Helping customers achieve continuous online monitoring and cost reduction, highly recognized by customers.
Related Products
Endress+HauseriTEMP TMT72, Transmitter HART
Endress+HauseriTEMP TMT182, Head Transmitter HART
Endress+HauseriTEMP TMT82, Transmitter HART
Endress+HauseriTEMP TMT80, Head Transmitter
Endress+HauseriTEMP TMT71, Transmitter 4-20mA
Endress+HauseriTEMP TMT31, Transmitter 4-20mA
Endress+HauseriTEMP TMT142, Field Transmitter HART
Endress+Hauser